Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 501:

  An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the upstream vPC switch peers.

  Which vPC feature must be implement to ensure that vPC and non-vPC switches receive same STP bridge ID from the upstream vPC switch peers?

  A. System-mac 0123.4567.89ab
  B. Peer-switch
  C. VPC local role-priority 4000
  D. Peer-gateway
  B. Peer-switch

• Question 502:

  An engineer must configuration a backup and restore of Cisco UCS Manager during the weekend maintenance windows. The configuration must be restored to its original state on Monday morning. The end users can make changes only to the Service Profile configuration.

  Which set of actions meets these requirements?

  A. Schedule a system backup to run at the start of every weekend and manually import the backup on Monday morning.
  B. Schedule a system backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning.
  C. Schedule a logical backup to run at the start of every weekend and manually import the backup on Monday morning.
  D. Schedule a logical backup to run at the start of every weekend and schedule the import of the backup to run on Monday morning.
  C. Schedule a logical backup to run at the start of every weekend and manually import the backup on Monday morning.

• Question 503:

  Which statement about the impact of a rolling EPLD upgrade on a Cisco MDS 9000 Series Switch is true?

  A. All modules on the switch are disrupted.
  B. An EPLD upgrade is nondisruptive.
  C. Only the modules that are being upgraded are disrupted.
  D. The upgrade can be performed from the standby supervisor module.
  C. Only the modules that are being upgraded are disrupted.

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/release/notes/epld/epld_rn.html#pgfId-241919

• Question 504:

  What happens when the command install all epid bootflash:m9000-pkg2-9.2.2. epid module all fanmodule all bar all is run on the Cisco MDS 9000 Series Director Switch?

  A. The active supervisor updates first
  B. Fan modules power cycle
  C. The switching module starts a rolling update
  D. Each module updates and power cycles
  D. Each module updates and power cycles

  ---

  
  

• Question 505:

  Refer to the exhibit.

  

  What is a characteristic presented in the service profile of the UUID?

  A. based on the hardware
  B. vendor assigned
  C. unique system generated
  D. allocated from a UUID pool
  A. based on the hardware

  ---

  Explanation

  There is no parameter for 'set identity dynamic-uuid' to specify a pool name-you can only state "derived" or a 32 hex character string (128-bits, therefore full UUID). ucspe /org/service-profile # set identity dynamic-uuid derived Derived FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF Dynamic UUID The documentation, as usual for Cisco, is poor. Shagua references old v1.4.1 documentation but it's the same in 4.1. It's inaccurate as uuid-pool should now read uuid-suffix- pool. You can use UCSPE to check the CLI with contextual help.

  ucspe /org/service-profile # set identity

  dynamic-uuid Dynamic UUID

  dynamic-wwnn Dynamic WWNN

  uuid-suffix-pool UUID Suffix Pool

  wwnn-pool WWNN Pool

  If set identity dynamic-uuid only gives us the option of a static UUID or the parameter "derived", and set identity uuid-suffix-pool is the option to assign a pool... I would suggest that the most logical answer here is -derived from the hardware.

  https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/cli/config/guide/1.4.1/CLI_Config_Guide_1_4_1_chapter27.html

• Question 506:

  An engineer needs a utility to translate traditional Nexus CLI inputs and generate Python code using XML and JSON message formats. The solution needs to be available on a Nexus 7700 series switch.

  Which utility should be used?

  A. NX-OS JSON-RPC
  B. NX-API Sandbox
  C. Guest Shell for NX-OS
  D. Open NX-OS
  B. NX-API Sandbox

  ---

  Explanation

  https://developer.cisco.com/docs/nx-os/#!nx-api-cli-developer-sandbox

• Question 507:

  An engineer must configure Cisco Nexus 9000 Series Switches for Cisco UCS Director integration.

  The configuration must enable automated onboarding of the switches as they come online. For security purposes, the switches must have the bare minimum of connection methods enabled. The connection protocol must allow authentication through credentials.

  Which protocol must be configured on the switches to allow automated onboarding?

  A. SNMP
  B. Telnet
  C. SSH
  D. HTTPS
  C. SSH

• Question 508:

  What is a feature of NFS?

  A. role-based access control
  B. Kerberos-based security model
  C. block-based file access
  D. zone-based access control
  B. Kerberos-based security model

  ---

  Explanation

  https://www.cisco.com/c/en/us/support/docs/security-vpn/kerberos/16087-1.html#modifiednfs

  

• Question 509:

  An engineer configures the properties of a cisco UCS cisco integrated Management controller network adapter for a standalone cisco C-Series server. The Fallback Timeout in the vNIC was set to 600. When the failure occurs. The secondary must be used and then fallback when the primary interface becomes available again.

  Which action be taken to meet these requirements?

  A. Set default VLAN on the adapters.
  B. Increase Cos to 6.
  C. Disable VNTAG mode.
  D. Enable Uplink failover.
  D. Enable Uplink failover.

• Question 510:

  DRAG DROP

  An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch.

  Drag and drop the configuration steps from the left into the correct order on the right.

  Select and Place:

  

  

  ---

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/adapter-fex/6x/b_5500_Adapter_FEX_Config_6x/b_5500_Adapter_FEX_Config_602N11_chapter_010.html