Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 511:

  Which component is excluded by default from the host firmware package?

  A. network interface controller
  B. board controller
  C. storage controller
  D. local disk
  D. local disk

• Question 512:

  A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available.

  Which associate service profile option should be selected to accomplish this goal?

  A. server pool
  B. server
  C. custom server
  D. restrict migration
  C. custom server

  ---

  Explanation

  https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration_Guide_141_chapter28.html

  

• Question 513:

  An engineer is performing an ISSU upgrade on the Cisco MDS 9000 Series Switch.

  What is the impact on the control plane of the switch?

  A. It is down for less than 80 seconds.
  B. It remains down for more than 80 seconds but less than 140 seconds.
  C. It remains down until the next reboot.
  D. It remains up throughout the update.
  D. It remains up throughout the update.

• Question 514:

  A DNS server with IP address 192.168.1.1 is deployed in a data center A network engineer must configure a Cisco UCS Fabric Interconnect to use this DNS.

  Which configuration should be applied?

  A. ficl-mgmt-A# scope fabric-interconnect a ficl-mgmt-A /fabric-interconnect # set name 192.168.1.1 ficl-mgmt-A /fabric-interconnect # scope system ficl-mgmt-A /system # commit-buffer
  B. ficl-mgmt-A# scope system ficl-mgmt-A /system # create dns 192.168.1.1 ficl-mgmt-A /system* # commit-buffer
  C. ficl-mgmt-A# scope fabric-interconnect a ficl-mgmt-A /fabric-interconnect # set name 192.168.1.1 ficl-mgmt-A /fabric-interconnect* # commit-buffer
  D. ficl-mgmt-A# scope system ficl-mgmt-A /system # scope services ficl-mgmt-A /system/services # create dns 192.168.1.1 ficl-mgmt-A /system/services* # commit-buffer
  D. ficl-mgmt-A# scope system ficl-mgmt-A /system # scope services ficl-mgmt-A /system/services # create dns 192.168.1.1 ficl-mgmt-A /system/services* # commit-buffer

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/1-3-1/b_CLI_Config_Guide_1_3_1/CLI_Config_Guide_1_3_1_chapter11.pdf

• Question 515:

  Refer to the exhibit.

  

  Which backup operation type not include the preserve identities feature?

  A. Full state
  B. Logical configuration
  C. System configuration
  D. All configuration
  A. Full state

• Question 516:

  Refer to the exhibit.

  

  An engineer must invoke a Python script that alerts the operations team when the router DC-RTR-1 becomes unreachable.

  Which configuration set accomplishes this task?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  D. Option D

• Question 517:

  Which two statements describe the process of performing an EPLD upgrade on a Cisco MDS 9000 Series Switch? (Choose two.)

  A. The upgrade is performed from the standby supervisor module.
  B. The upgrade process disrupts only the module that is being upgraded.
  C. The upgrade is performed on the active supervisor.
  D. If an upgrade is interrupted, the upgrade continues after a connection is restored.
  E. Modules must be online to be upgraded.
  A. The upgrade is performed from the standby supervisor module.
  B. The upgrade process disrupts only the module that is being upgraded.

• Question 518:

  Which virtual MAC address is the default for HSRP version 2 group 10?

  A. 0000.5E00.0110
  B. 0000.0C9F.F010
  C. 3719.0351.1C0A
  D. 0000.0C9F.F00A
  D. 0000.0C9F.F00A

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3s-book/fhp-hsrp-v2.html

• Question 519:

  Refer to the exhibit.

  

  What is the result of implementing this configuration?

  A. The Fibre Channel interface is configured for synchronization distribution.
  B. The Fibre Channel interface is configured for SPAN.
  C. The Fibre Channel interface is configuration for source distribution.
  D. The Fibre Channel interface is configured for FSPF.
  B. The Fibre Channel interface is configured for SPAN.

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/san_switching/421_n1_1/b_Cisco_n5k_nxos_sanswitching_config_guide_rel421_n1_1/Cisco_n5k_nxos_sanswitching_config_guide_rel421_n1_1_chapter3.html

  https://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli_rel_4_1/Cisco_Nexus_5000_Series_Switch_CLI_Software_Configuration_Guide_chapter50.html

• Question 520:

  Refer to the exhibit.

  

  An engineer must configure Embedded Event Manager to output a message to syslog when the Cisco IOS write memory CLI command runs.

  Which command completes the script?

  A. event cli pattern "write memory.*" sync yes
  B. event cli match "write memory.*" sync yes
  C. event cli regex "write memory.*" sync yes
  D. event cli command "write memory.*" sync yes
  A. event cli pattern "write memory.*" sync yes