Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 521:

  Refer to the exhibit. An engineer created a VRF called "Sigtran" using Terraform resource "aci_vrf" identified by "Signaling" and the bridge domain called "App".

  

  Which argument reference must be used to map the bridge domain to the "Sigtran" VRF?

  A. aci_vrf.Signaling.id
  B. aci_vrf.App.id
  C. aci_vrf.Sigtran.id
  D. aci_vrf.PROD.id
  A. aci_vrf.Signaling.id

• Question 522:

  DRAG DROP

  Refer to the exhibit.

  

  In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:

  R1 must be the active RP.

  R2 must be the backup RP that is used only if R1 is not reachable

  Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

  Select and Place:

  

  

• Question 523:

  Refer to the exhibit. An engineer is performing a Cisco Nexus 3000 Series Switch configuration backup with a TFTP server that is reachable in the global routing table.

  Which action completes the scheduler configuration?

  

  A. Use the default VRF for the scheduler job.
  B. Configure the scheduler authentication password.
  C. Define the scheduler start time as required.
  D. Make the size of the job output lower than the size of the log file.
  A. Use the default VRF for the scheduler job.

• Question 524:

  Which product includes prebuilt templates that can be used to customize fabric deployments?

  A. Cisco ACI
  B. Cisco UCS Manger
  C. Cisco data Center Network Manger
  D. Cisco Tetration
  C. Cisco data Center Network Manger

  ---

  Explanation

  https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-data-center-networkmanager/datasheet-c78-740978.html

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/11_2_1/config_guide/lanfabric/b_dcnm_fabric_lan/template_usage.html

• Question 525:

  A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state.

  Which open- source tool meets these requirements?

  A. SaltStack
  B. Terraform
  C. Puppet
  D. Kubemetes
  C. Puppet

  ---

  Explanation

  "Overview of Puppet architecture: [...] After it receives a catalog, the Puppet agent applies the catalog by checking each resource that the catalog describes. If it finds any resources that are not in their desired state, it makes any changes necessary to correct them."

  https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series-rackservers/whitepaper_c11-740103.pdf

  https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-devops-integration-sol-brief.pdf

  from DCCOR book under Puppet section.

  The operation of the Puppet agent involves periodically connecting to the Puppet master, which in turn compiles and sends a configuration manifest to the agent. The agent reconciles this manifest with the current state of the node and updates state that is based on differences.

• Question 526:

  Refer to the exhibit.

  

  An engineer is troubleshooting a connectivity issue for a VM with MAC address 00:50:56:88:10:14 running on a Cisco UCS-B Series blade in VLAN 10. Cisco UCS Manager is connected to a Cisco Nexus 9000 Series switch over port channel

  10. Currently, the VM is unreachable from any source that is outside of the Cisco UCS domain. Which action must be taken to allow the VM to be reachable?

  A. Allow VLAN 10 In the VPC peer link between the Cisco Nexus switches
  B. Allow VLAN 10 In the vSwitch at the hypervisor level.
  C. Allow VLAN 10 In a trunk between the Fabric interconnects and the Cisco Nexus snitches.
  D. Allow VLAN 10 In a trunk between the IOM and the Fabric Interconnects.
  C. Allow VLAN 10 In a trunk between the Fabric interconnects and the Cisco Nexus snitches.

• Question 527:

  Refer to the exhibit.

  

  Which setting must be configured to prevent reuse of passwords?

  A. No Change Interval
  B. Change Interval
  C. History Count
  D. Change Count
  C. History Count

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_011.html

• Question 528:

  A storage administrator notices an increasing number of storage targets that unexpectedly reach capacity, causing periodic service interruptions. The administrator must now create and submit a daily report of the environment that shows the status of the storage targets with the highest capacities.

  Which solution provides this information?

  A. Nagios Core with OpManager
  B. Cisco DCNM with SAN Insight
  C. SolarWinds with Slow Drain Analysis
  D. Cisco Intersight with Slow Drain Analysis
  B. Cisco DCNM with SAN Insight

• Question 529:

  An engineer requires the Cisco Fabric Services to distribute NTP configuration only to the members within the scope of a VSAN that belongs to a Cisco Unified Network.

  Which scope distribution must be selected to meet this requirement?

  A. Logical scope
  B. Physical scope
  C. Uncoordinated scope
  D. Coordinated scope
  A. Logical scope

• Question 530:

  Refer to the exhibit.

  

  Which feature set must be used to configure on switch 2 to establish a VSAN trunk between switch 1 and switch 2?

  A. F Port Trunk Mode Passive
  B. N Port Trunk Mode Active
  C. NP Port Trunk Mode Auto
  D. E Port Trunk Mode On
  D. E Port Trunk Mode On