Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 491:

  What is an advantage of steaming telemetry over SNMP?

  A. MD-5based authentication on polling
  B. periodic polling of the device status
  C. periodic push-based subscription messages
  D. on-change traps sent to a receiver
  C. periodic push-based subscription messages

• Question 492:

  Refer to the exhibit.

  

  Users report SAN traffic packet loss on a blade server that is managed by using Cisco UCS Manager. An engineer must implement a SPAN feature to an external Fibre Channel analyzer.

  Which configuration source in the TEST monitoring session must the engineer select?

  A. all the VSANs from the server
  B. all the uplink Fibre Channel ports
  C. all the virtual host bus adapters from the server
  D. all the storage ports
  C. all the virtual host bus adapters from the server

• Question 493:

  Refer to the exhibit.

  

  A flapping link issue has been reported on the vPC keepalive link. A packet capture has been activated on the Cisco Nexus switch.

  What is the destination IP address of the vPC keepalive packets that are sent by the switch?

  A. 192.168.254.4
  B. 239.255.70.83
  C. 192.168.254.1
  D. 192.168.254.2
  A. 192.168.254.4

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/interfaces/92x/b-cisco-nexus-3000-nx-os-interfaces-configuration-guide-92x/b-cisco-nexus-3000-nx-os-interfaces-configuration-guide-92x_chapter_0110.html

• Question 494:

  Which configuration generates a syslog message when CPU utilization is higher than 60%?

  A. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
  B. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
  C. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
  D. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"
  A. event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg "cpu high"

  ---

  Explanation

  https://www.cisco.com/c/en/us/support/docs/ip/internet-protocol-ip/200931-EEM-Subsystem-in-Order-to-Monitor-CPU-Tr.pdf

  https://blog.ipspace.net/2008/06/generate-snmp-trap-on-high-cpu-load.html

• Question 495:

  A Cisco MDS 9000 series storage Switch has reloaded unexpectedly.

  Where does the engineer look for the latest core dump file?

  A. /mnt/core
  B. /mnt/pss
  C. /mnt/logs
  D. /mnt/recovery
  B. /mnt/pss

  ---

  Explanation

  

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/system_management/nx-os/sysmgmt_cli_6-x/sys.html

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/system_management/nx-os/sysmgmt_cli_6-x/sys.html#37039

• Question 496:

  Refer to the exhibit.

  

  What is the result of executing this python code?

  A. It backs up Cisco switches to Cisco Prime infrastructure.
  B. It sends the switch configuration to Cisco TAC.
  C. It sends a Cisco device backup to a remote destination.
  D. It schedules a backup on a Cisco switch using EEM.
  C. It sends a Cisco device backup to a remote destination.

• Question 497:

  Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)

  A. system
  B. third-party
  C. PSU
  D. CIMC
  E. BIOS
  D. CIMC
  E. BIOS

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Firmware-Mgmt/4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0/b_UCSM_GUI_Firmware_Management_Guide_4-0_chapter_0100.html

  

• Question 498:

  What is a characteristic of the install all command on the Cisco Nexus Series Switch?

  A. automatically checks the image integrity
  B. continues the upgrade process if any step in the sequence fails
  C. upgrades only certain modules
  D. impacts data plane traffic
  A. automatically checks the image integrity

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/7-x/upgrade/guide/b_Cisco_Nexus_9000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7x/b_Cisco_Nexus_9000_Series_NXOS_Software_Upgrade_and_Downgrade_Guide_Release_7x_chapter_010.html

  install all command automatically checks the image integrity, which includes the NXOS software image. The command performs a platform validity check to verify that a wrong image is not used.

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus3000/sw/upgrade/7_x/bCisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x/bCisco_Nexus_3000_Series_NX_OS_Software_Upgrade_and_Downgrade_Release_7_x_newGuide_chapter_01.html

• Question 499:

  DRAG DROP

  Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.

  Select and Place:

  

  

• Question 500:

  Refer to the exhibit.

  

  

  An engineer prepared the configuration of OSPF in a text file named OSPF.txt.

  The engineer decided to remove all OSPF configurations.

  Which Python code must be added to accomplish this goal?

  A. OSPF_Conf.write(*interface elh1/1\n') OSPF_Com* closed
  B. OSPF_Conf.write('no feature ospf\n")
  C. OSPF_Conf.wrlte('lntorface eth1/1, no feature ospf'Vn') OSPF_Conf.close()
  D. OSPF_Conf.write('interface eth1/1\n'>
  B. OSPF_Conf.write('no feature ospf\n")