1. Home
  2. Cisco
  3. 350-601

Cisco 350-601 Online Practice Questions and Exam Preparation

350-601 Exam Details

  • Exam Code
    :350-601
  • Exam Name
    :Implementing and Operating Cisco Data Center Core Technologies (DCCOR)
  • Certification
    :CCIE Data Center
  • Vendor
    :Cisco
  • Total Questions
    :708 Q&As
  • Last Updated
    :May 28, 2026

Cisco 350-601 Online Questions & Answers

  • Question 481:

    An engineer must create a backup file of the entire Cisco UCS system before the maintenance window starts. The backup file must include these attributes:

    1. all logical configuration settings such as service profiles, VLANs, and VSANs

    2. all Cisco UCS usernames, roles, and locales

    3. all Cisco UCS system settings

    Which backup type must be selected to achieve this goal?

    A. All Configuration
    B. Full State
    C. System Configuration
    D. Logical Configuration

  • Question 482:

    An engineer must configure Cisco MDS 9000 Series Switch to provide role-based authorization on a TACACS+ server.

    The configuration must meet these requirements:

    1. All commands under the switch configuration mode must be permitted.

    2. The group of TACACS+ servers is named lad.

    Which command set accomplishes this task?

    A. a authorization config-commands aaa authorization conflg-commands default group tad
    B. aaa authentication conflg-commands aaa authentication config -commands default group tad
    C. aaa authentication commands aaa authentication commands default group tad
    D. aaa authorization commands aaa authorization commands default group tad

  • Question 483:

    An engineer needs to monitor ingress traffic that arrives at interface Ethernet 1/3 that belongs to a Cisco Nexus 5600 Series Switch. The traffic analyzer machine located at interface Ethernet 1/5 is already monitoring other production, and the traffic analyzer must not be impacted by the traffic captured from the interface Eth1/3. The operations team allocated a traffic budget for the new monitoring session of 1 Gbps to meet this requirement.

    Which set of commands configures the SPAN session?

    A. Option A
    B. Option B
    C. Option C
    D. Option D

  • Question 484:

    An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.

    Which configuration is expected to be saved by using this backup type?

    A. systems
    B. roles
    C. service profiles
    D. servers

  • Question 485:

    Refer to the exhibit.

    An engineer is troubleshooting a connection issue from the virtual machine that is located on the Webserver 1 blade.

    The application team requested a packet capture for all traffic that is transferred to and from Webserver 1.

    The engineer confirmed that the host server vNIC1 has VLAN 300 assigned to It.

    Which action must be taken to capture the traffic?

    A. Configure a span session that Is sourced from Eth1/1 with a destination that is set to port channel 1.
    B. Configure a span session that Is sourced from Eth1/3 with a destination that Is set to Ethl/2.
    C. Configure a span session that Is sourced from port channel 1 with a destination that Is set to port channel 2.
    D. Configure a span session that Is sourced from service profile vNlCi with a destination that is set to Ethl /3.

  • Question 486:

    Refer to the exhibit.

    An engineer is configuring a VSAN on the network.

    Which option must be selected to create the VSAN?

    A. Fabric B
    B. FC Zoning Enabled
    C. Fabric A
    D. Common/Global

  • Question 487:

    Refer to the exhibit.

    VSAN 2077 has been configured as the primary path.

    Which configuration must be implemented to allow the Cisco UCS system to enable zoning while the device neighbor allows communication using port FC1/24 to the servers?

    A. Configure Fl in Fibre Channel switching mode and port (d/24 as an FCoE uplink port.
    B. Configure Fl in Fibre Channel switching mode and port fd/24 as a network uplink port.
    C. Configure Fl in Fibre Channel switching mode and port fd/24 as a Fibre Channel storage port.
    D. Configure Fl in Fibre Channel end-host mode and port fd/24 as an appliance port.

  • Question 488:

    DRAG DROP

    Drag and drop the Hyperflex characteristics from the left onto the appropriate Hyper Hex node types on the right.

    Select and Place:

  • Question 489:

    Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS.

    Which action accomplishes this goal?

    A. Reinstall the cluster to generate the default key ring certificate
    B. Generate a new default key ring certificate from the Cisco UCS Manager
    C. Reboot the SSO component of the Cisco UCS Manager
    D. Regenerate the default key ring certificate manually

  • Question 490:

    Refer to the exhibit.

    What is the outcome of this command when the ELPD is updated on a Cisco Nexus 9000 series switch?

    A. displays the compatibility of the EPLD upgrade and the image in the bootflash
    B. shows a simulated upgrade of the EPLD
    C. upgrades the EPLD on the switch disruptively
    D. displays the impact of the upgrade on the operation of the switch

Related Exams:

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-601 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.