Cisco 300-180 Online Practice Questions and Exam Preparation

Cisco 300-180 Online Questions & Answers

• Question 41:

  Refer to the exhibit.

  

  What command should you execute next in resolving a lock failure?

  A. ntp execute
  B. ntp commit
  C. ntp lock
  D. ntp help
  E. ntp detail
  B. ntp commit

• Question 42:

  Refer to the exhibit.

  

  You discover that eth1/1 stopped forwarding data. Which option describes how to resolve the issue?

  A. Reboot the switch.
  B. On the adjacent switch, run the spanning-tree port type network command.
  C. On the switch, change the STP type.
  D. On the adjacent switch, disable bridge assurance.
  C. On the switch, change the STP type.

• Question 43:

  Which power policy should be chosen to maximize the performance of a Cisco UCS system with four PSUs and eight blades?

  A. non-redundant
  B. N+1
  C. grid
  D. performance
  C. grid

• Question 44:

  Which is the cause of the disk being unavailable, during the installation of ESXi on a C- Series UCS server the logical 4TB disk for the installation client?

  A. The logical drive was created using the Embedded Software Raid Controller
  B. VMware requires the LSI Drivers to be installed first
  C. The logical drive is in RAID0
  D. The logical drive is not available as RAID has not completed building
  A. The logical drive was created using the Embedded Software Raid Controller

• Question 45:

  DRAG DROP

  Drag and drop the OSPF adjacency states from the left onto the correct definitions on the right.

  Select and Place:

  

  

• Question 46:

  You are configuring a Cisco Nexus 9000 Series Switch. Which configuration can be implemented for VXLAN BGP EVPN?

  A. VXLAN BGP EVPN by using an NVE interface in a default VRF
  B. RACLs on the Layer 3 uplinks for the VXLAN traffic
  C. QoS classification for the VXLAN traffic on all of the interfaces
  D. DHCP snooping on the VXLAN VLANs
  B. RACLs on the Layer 3 uplinks for the VXLAN traffic

• Question 47:

  How can you identify the blade location when tracing server traffic?

  A. by performing CDP checks on the Cisco UCS Fabric Interconnects
  B. by using a trace utility
  C. by collecting traffic that uses a SPAN monitoring port
  D. by examining the interface to which the server MAC address is connected
  D. by examining the interface to which the server MAC address is connected

• Question 48:

  Which action do you take to recover a Cisco UCS Director password?

  A. Use SSH to log in to the device, and then reset the password.
  B. Mount the Cisco UCS Director image on a KVM, reload the device, and then reset the password.
  C. Log into the Cisco UCS Director appliance as root, and then run the admin password reset script.
  D. Press CTRL-Break when the system boots, and then configure the config-register command to ignore the current configuration.
  C. Log into the Cisco UCS Director appliance as root, and then run the admin password reset script.

• Question 49:

  Which three of these would cause two switch fabrics not to merge? (Choose three.)

  A. Two or more switches do not have at least one assigned domain ID in common.
  B. Two switches have different assigned VSANs on the connecting ports.
  C. Two switches have different assigned VLANs on the connecting ports.
  D. The static domain ID does not override the dynamic ID.
  E. The election of the static domain is only determined by the WWNs of the two switches.
  F. The physical connectivity between the two switches is not active.
  A. Two or more switches do not have at least one assigned domain ID in common.
  B. Two switches have different assigned VSANs on the connecting ports.
  F. The physical connectivity between the two switches is not active.

• Question 50:

  Which two commands will help an administrator identify any issues with an In-Service Software Upgrade? (Choose two.)

  A. show cts interface
  B. show incompatibility system
  C. show license file
  D. show install impact all
  E. show install issu-failure
  B. show incompatibility system
  D. show install impact all