Cisco 300-180 Online Practice Questions and Exam Preparation

Cisco 300-180 Online Questions & Answers

• Question 481:

  On a Cisco Nexus 5500 Series Switch, the VFC is stuck in the initializing state. Which QoS statements must be configured for FCoE to operate?

  A. system qos service-policy type qos input fcoe-default-in-policy service-policy type queuing input fcoe-default-in-policy service-policy type queuing output fcoe-default-out-policy service-policy type network-qos fcoe-default-nq-policy
  B. system qos service-policy type qos input fcoe-default-in-policy service-policy type queuing input fcoe-default-in-policy service-policy type qos input default-in-policy service-policy type network-qos default-nq-policy
  C. system qos service-policy type qos input default-in-policy service-policy type queuing input default-in-policy service-policy type queuing output default-out-policy service-policy type network-qos default-nq-policy
  D. system qos service-policy type qos input default-in-policy service-policy type queuing input default-in-policy service-policy type queuing output fcoe-default-out-policy service-policy type network-qos fcoe-default-nq-policy
  A. system qos service-policy type qos input fcoe-default-in-policy service-policy type queuing input fcoe-default-in-policy service-policy type queuing output fcoe-default-out-policy service-policy type network-qos fcoe-default-nq-policy

• Question 482:

  Refer to the exhibit.

  

  All the interfaces on the switch must forward traffic by using VLAN 701. Which action do you take?

  A. Enable the vPC on port channel 1101 and port channel 1102.
  B. Lower the switch priority such that it becomes the spanning tree root.
  C. Increase the switch priority such that it becomes the spanning tree root.
  D. Allow VLAN 701 on port channel 1101 and port channel 1102.
  B. Lower the switch priority such that it becomes the spanning tree root.

• Question 483:

  Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech-support command output information about the Cisco UCS domain? (Choose two.)

  A. TFTP
  B. FTP
  C. SCP
  D. Telnet
  E. SecureTelnet
  B. FTP
  C. SCP

• Question 484:

  A customer has a Cisco Nexus switch that has an FEX in an offline state. Which statement do you tell the customer?

  A. The FEX is online currently.
  B. The FEX is offline currently.
  C. The FEX can be switched to an online state.
  D. The state does not indicate the actual state or presence of the FEX on the switch port.
  B. The FEX is offline currently.

• Question 485:

  Which command output shows the interface assigned as the designated receiver of each VLAN?

  A. show system vlan reserved
  B. show vlan internal bd-info bd-to-vlan all-bd
  C. show port internal info all
  D. show platform software enm internal info vlandb all
  D. show platform software enm internal info vlandb all

• Question 486:

  Within Cisco UCS Manager you create a user named ccnpdc and an organization named ccnpdc. The administrator to whom the ccnpdc credentials are assigned fails to access the ccnpdc organization. What must you do to provide the ccnpdc user access to the ccnpdc organization?

  A. assign a locale
  B. assign a role
  C. set the password expire time
  D. enable the user account
  A. assign a locale

• Question 487:

  Which feature must be enabled before the Data Center Bridging Exchange Protocol can be run on a switch?

  A. IEEE 802.1ad
  B. Fibre Channel
  C. CDP
  D. LLDP
  D. LLDP

• Question 488:

  You have three VDCs named VDCI, VDC2 and VDC3 connected to the same environment, Due to a network device malfunction, there is an ARP storm in VDC1 Users in VDC2 discover that

  ARP is not resolving in VDd. What is causing the issue?

  A. The committed information rate is exceeded.
  B. VDC1 is responsible for processing ARP for all of the VDCs,
  C. The CoPP settings for VDC1 are Incorrect.
  D. The CoPP settings for VDC2 are incorrect,
  A. The committed information rate is exceeded.

• Question 489:

  Within Cisco UCS Manager, which two types of objects can be restricted by using RBAC? (Choose two.)

  A. service profiles
  B. roles
  C. users
  D. locales
  E. RADIUS
  B. roles
  D. locales