Cisco 300-180 Online Practice Questions and Exam Preparation

Cisco 300-180 Online Questions & Answers

• Question 11:

  In Cisco NX-OS releases prior to 5.2, how should the copp-system-p-policy policy be modified to change how the supervisor module is protected from DoS attacks?

  A. Modify the policy map type control-plane copp-system-policy.
  B. Open DCNM and modify the "copp-system-p-policy" policy object.
  C. Re-run the setup utility and apply a new CoPP profile.
  D. In Cisco NX-OS versions prior to 5.2, the CoPP system profile can only be modified from the CMP CLI.
  C. Re-run the setup utility and apply a new CoPP profile.

• Question 12:

  NPV mode is not operating properly on a Cisco Nexus or Cisco MDS Series Switch. What are two reasons? (Choose two.)

  A. An uplink NP port is stuck initializing.
  B. The VSAN does not match at each end of the connection.
  C. The VLAN does not match at each end of the connection.
  D. The license is invalid.
  A. An uplink NP port is stuck initializing.
  B. The VSAN does not match at each end of the connection.

• Question 13:

  On the Cisco Nexus 7000 Series Switch, what could be the reason why the (config- vlan)#private-vlan primary command fails?

  A. There are not enough resources in the VDC.
  B. You are using a reserved VLAN ID.
  C. The VLAN is a secondary VLAN.
  D. The interface is in the wrong VRF.
  E. The PVLAN feature is not enabled.
  F. The VLAN does not exist.
  E. The PVLAN feature is not enabled.

• Question 14:

  You have upgraded your Cisco Nexus 7009 Switches and converted the default VDC to an admin VDC. You notice that all of the ACLs are still present on the admin VDC after the conversion. What should you do?

  A. enable configuration synchronization between the admin VDC and the production VDCs
  B. delete the ACLs
  C. delete all ACLs except those related to CoPP
  D. delete all ACLs except those bound to resource templates
  E. use the system admin-vdc acl command to properly migrate ACLs
  B. delete the ACLs

• Question 15:

  From Cisco UCS Central, you plan to add two Cisco UCS domains that use the same name for the WWPN pool. What must you do to ensure a successful Integration?

  A. Rename the pools to have the same name.
  B. Assign WWPN pools to Different users.
  C. Move the WWPN pools to different organizations.
  D. Remove duplicate WWPN pools.
  D. Remove duplicate WWPN pools.

• Question 16:

  What is the recommended procedure to update Cisco UCS C-Series rack-mount server firmware?

  A. Launch the Cisco UCS Firmware Update Utility from virtual media.
  B. Launch the Cisco UCS Host Update Utility from virtual media.
  C. Launch the Cisco UCS Server Update Utility from virtual media.
  D. Launch the Cisco UCS CIMC Update Utility from virtual media.
  B. Launch the Cisco UCS Host Update Utility from virtual media.

• Question 17:

  For a KVM session to be successful, which two of these need to be done? (Choose two.)

  A. The Cisco IMC IP address needs to be assigned on the Admin tab.
  B. The Cisco IMC IP address needs to be in the same subnet as the management IP.
  C. The Cisco IMC needs to be upgraded to the same version as the UCS Manager.
  D. The server needs to be fully discovered.
  A. The Cisco IMC IP address needs to be assigned on the Admin tab.
  D. The server needs to be fully discovered.

• Question 18:

  Which configuration is needed to suppress duplicate IP addresses when HSRP localization is enabled?

  A. Configure matching passwords in each data center.
  B. Configure no ip arp gratuitous hsrp duplicate under the VLAN.
  C. Remove the passwords in each data center.
  D. Configure mismatching HSRP versions between data centers.
  E. Change one data center to run VRRP rather than HSRP.
  B. Configure no ip arp gratuitous hsrp duplicate under the VLAN.

• Question 19:

  A customer is deploying multihop FCoE in its network. Which guideline must the customer follow with respect to VE ports to make this deployment possible?

  A. Auto mode on the vFC interface is supported.
  B. VE-port trunking is supported over FCoE-enabled VLANs.
  C. VE-port interface binding to MAC addresses is supported.
  D. A VE port is disabled for trunk mode by default.
  B. VE-port trunking is supported over FCoE-enabled VLANs.

• Question 20:

  

  

  

  The Cisco Nexus 2248 FEX has been added recently to the network via a vPC to the Nexus 5000 switches; however, connectivity is not yet operational. What is the problem with the configuration?

  A. Both Nexus 5000 switches must associate to the same FEX number
  B. Each Nexus 5000 should have its own FEX to support a straight-through topology.
  C. The maximum number of links for pinning purposes should be increased to 2.
  D. Ethernet1/18 must be configured without a port channel.
  D. Ethernet1/18 must be configured without a port channel.