Cisco 300-180 Online Practice Questions and Exam Preparation

Cisco 300-180 Online Questions & Answers

• Question 431:

  Which four tasks can be performed via Cisco IMC remote access to a Cisco UCS system? (Choose four.)

  A. power cycle the server
  B. deploy an operating system
  C. toggle the locator LED
  D. configure the boot order
  E. view properties and sensors
  F. configure the hypervisor
  G. enable Cisco UCS Manager
  A. power cycle the server
  C. toggle the locator LED
  D. configure the boot order
  E. view properties and sensors

• Question 432:

  A customer is configuring the dynamic vNIC connection policy in a Cisco UCS domain. Why is the dynamic vNIC policy required?

  A. It is only required if you are configuring VM-FEX.
  B. It is only required if you are configuring Adapter-FEX.
  C. It is mainly for the Cisco UCS Manager to communicate with the fabric interconnect.
  D. It is required for Cisco UCS instances that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs.
  D. It is required for Cisco UCS instances that include servers with VIC adapters on which you have installed VMs and configured dynamic vNICs.

• Question 433:

  Refer to the exhibit

  

  Which description of the result is true?

  A. Nexus7K-2 is the RP for all of the multicast addresses specified in the 224.0.11.0/24 group list.
  B. Nexus7K-1 is the RP for all of the multicast addresses specified in the 224.0.11.0/24 group list.
  C. Nexus7K-2 is the RP for all of the multicast traffic on the network.
  D. Nexus7K-1 is the RP for all of the multicast traffic on the network.
  D. Nexus7K-1 is the RP for all of the multicast traffic on the network.

• Question 434:

  Refer to the exhibit.

  

  Which interface is configured as a management interface for the Cisco UCS chassis?

  A. eth0
  B. vlan4047
  C. eth1
  D. eth2
  A. eth0

• Question 435:

  Which solution can be applied if there is communication between hosts in different VLANs over Cisco OTV and the hosts are losing connectivity?

  A. Configure an EFM script to clear MAC CAM tables on all deuces every 25 minutes.
  B. Increase the Cisco OTV CAM timers to match the ARP timer on any non-Nexus switches.
  C. Move hosts so that they belong to the same VLAN,
  D. Configure me ARP timers of any non-Nexus switches to be less than the Cisco OTV CAM timer.
  D. Configure me ARP timers of any non-Nexus switches to be less than the Cisco OTV CAM timer.

• Question 436:

  Which three requirements are needed to configure a blade to boot successfully from Fibre Channel? (Choose three.)

  A. zoning
  B. LUN masking
  C. WWPN device alias
  D. boot from SAN policy
  E. SAN connectivity policy
  F. port assignment
  G. target WWPN needs to be set in the boot from SAN policy
  A. zoning
  B. LUN masking
  D. boot from SAN policy

• Question 437:

  When should an operating system driver be installed or updated?

  A. during a Cisco UCS firmware update
  B. during an operating system update
  C. after reviewing the Cisco UCS B-Series Hardware and Software Interoperability Matrix and reacting accordingly
  D. when you connect the new storage system
  C. after reviewing the Cisco UCS B-Series Hardware and Software Interoperability Matrix and reacting accordingly

• Question 438:

  DRAG DROP

  Drag and drop the VSM issues from the left onto the possible causes on the right.

  Select and Place:

  

  

• Question 439:

  You discover that OSPF neighbors are stuck in Exstart and Exchange states.

  What prevents the external routes from being propagated to the leaf switches to which endpoints are attached for a given tenant?

  A. The outside router is configured with an incorrect OSPF area ID.
  B. There is an MTU mismatch between the OSPF neighbors.
  C. The outside router is configured with an incorrect OSPF area type.
  D. The outside router is not configured for MTU 9000
  D. The outside router is not configured for MTU 9000

• Question 440:

  

  

  What is the reason that no C-Series servers can access Fibre Channel storage from this Cisco Nexus 554SUP switch?

  A. Zoning mode mis-match with the MDS 9124
  B. There are no active Fibre Channel interfaces
  C. VSAN mis-match on Fibre Channel interfaces
  D. None of the virtual fibre channel interfaces are configured
  A. Zoning mode mis-match with the MDS 9124