HP HP Certifications HP0-Y52 Questions & Answers

• Question 91:

  Which HP solution delivers automated virtual machine orchestrator, automatic synchronization of network connectivity information, and visibility to performance of wired and wireless users?

  A. Unified Wired-WLAN modules and switches

  B. Intelligent Management Center (IMC)

  C. Virtual Connect FlexFabric

  D. Intelligent Resilient Framework

  Correct Answer: B

• Question 92:

  Refer to the Exhibit.

  

  Originally, all four switches had the same region configuration. VLAN 14 was added to Switch_D and then mapped to instance 2. How does this affect the Multiple Spanning Tree Protocol (MSTP) topology?

  A. Load sharing is lost; one of the uplinks is blocked for all traffic on Switch_D.

  B. All connectivity is lost; both uplinks are blocked on Switch_D.

  C. A Layer 2 loop exists and will cause sporadic connectivity issues.

  D. Load sharing is lost; one of the uplinks is blocked for all traffic on Switch_C and Switch_D.

  Correct Answer: B

• Question 93:

  A network administrator wants to join a switch to an Intelligent Resilient Framework (IRF) virtual device. The administrator changes the switch member ID from 1 to 2. What must the administrator do before configuring the IRF port on this switch?

  A. Physically connect the switch to the IRF master device.

  B. Reboot the switch.

  C. Disable IP routing.

  D. Enable the physical interfaces that will be assigned to the IRF port.

  Correct Answer: D

• Question 94:

  Refer to the Exhibit.

  

  A network administrator needs to configure DHCP on SwitchA. Assume that SwitchA is an HPE Comware switch and is using the default settings for DHCP. The administrator configures the following information:

  

  The administrator then has the DHCP client try to acquire addressing information, but the process fails. What should the administrator do to solve this problem?

  A. Execute the routing command on SwitchA.

  B. Execute the dhcp enable command on SwitchA.

  C. Configure DHCP relay on SwitchB.

  D. Enable DHCP Snooping on SwitchA.

  Correct Answer: B

• Question 95:

  What is the purpose of a management VLAN on an HP Provision switch?

  A. To prevent IP addresses from being configured on any VLANs other than the management VLAN

  B. To provide an administrative-only marker, label, or alias for the VLAN where IMC is installed

  C. To identify a specific VLAN as the only VLAN from which users can connect to the switch management interface

  D. To limit remote access connections by specifying the IP addresses that can establish connections

  Correct Answer: C

• Question 96:

  When adding a new member to an existing IRF domain, which of the following must you perform first?

  A. Define the IRF priority.

  B. Create the IRF logical port.

  C. Define the IRF domain name.

  D. Define the IRF member number.

  Correct Answer: D

• Question 97:

  A company needs a two-member Intelligent Resilient Framework (IRF) virtual switch. The network administrator is configuring IRF member 2 that will connect to port 1/1 on IRF member 1. What is the correct IRF port ID for member 2?

  A. 1/2

  B. 2/2

  C. 1/1

  D. 2/1

  Correct Answer: B

• Question 98:

  A network administrator deletes old files in the flash file system of an HP Comware switch. The administrator then notices that the amount of free space available has not changed. Which command must the administrator execute to free up the space from deleted files?

  A. reset recycle-bin

  B. recycle-bin cleanup

  C. cleanup recycle-bin

  D. recycle-bin empty

  Correct Answer: A

• Question 99:

  A customer is implementing an access layer solution with four HP Comware switches in an Intelligent Resilient Framework (IRF) virtual device or domain. The customer expects to add two additional switches of the same model and would like to add them to the existing IRF virtual device. What must the customer verify?

  A. that the IRF virtual device has spanning tree enabled on it

  B. that the new switches are both assigned the same member ID as the master of the existing IRF virtual device

  C. that the IRF virtual device is using a daisy chain topology to provide better resilience

  D. that the switch model supports at least six switches in an IRF virtual device

  Correct Answer: A

• Question 100:

  A server connects to a port on an HP Comware switch. The network administrator wants to ensure that:

  Which statement describes how the administrator can accomplish this?

  A. The administrator must manually configure the port as an STP edge port.

  B. The administrator can lower the port's root path cost to zero.

  C. The administrator can accept the default behavior of auto-edge.

  D. The administrator can configure the port as an MSTP master port.

  Correct Answer: B