Extreme Networks EW0-100 Online Practice Questions and Exam Preparation

Extreme Networks EW0-100 Online Questions & Answers

• Question 1:

  Exhibit:

  

  What is the meaning of the following error?

  A. Port 1 is already used by another untagged VLAN.
  B. Port 1 is already used by another tagged VLAN.
  C. Port 1 is using tag value 1 already in use by the Mgmt VLAN.
  D. Port 1 is using a protocol filter already in use by another VLAN.
  A. Port 1 is already used by another untagged VLAN.

• Question 2:

  How could you verify that MAC address learning is disabled for ports 1-8 on a Summit7i switch?

  A. Enter the show ports config detail command.
  B. Enter the show ports management detail command.
  C. Enter the show ports statistics detail command.
  D. Enter the show ports info detail command.
  D. Enter the show ports info detail command.

• Question 3:

  Extreme Networks switches support this number of software images in flash RAM.

  2

• Question 4:

  __________ LSAs are sent out within an autonomous system by an ASBR to advertise external routes. Select the LSA type that is sent out within an autonomous system by an ASBR to advertise external routes.

  type 5

• Question 5:

  You need a single syslog server to list each level of log messages in different files.

  You configure the syslog server to segregate the messages through the __________ feature.

  facility

• Question 6:

  Extreme Networks switches build their forwarding database by reading the:

  A. source MAC address.
  B. destination MAC address.
  C. source IP address.
  D. destination IP address.
  A. source MAC address.

• Question 7:

  The switch with the __________ is elected as the root bridge.

  A. highest number of active ports
  B. lowest numerical bridge ID
  C. highest numerical bridge ID
  D. None of these
  B. lowest numerical bridge ID

• Question 8:

  In order to span VLANs across switches, EDP must be enabled.

  A. True
  B. False
  B. False

• Question 9:

  All OSPF routers in the same area must have the same LSDB.

  A. True
  B. False
  A. True

• Question 10:

  You are taking steps to secure SNMP access to your switches after reviewing CERT Advisory CA-2002-03 on the Extreme Networks web site. Your supervisor instructs you to turn off SNMP access to the switches. How will you do this?

  A. Enter the DISABLE SNMP ACCESS command and then reboot the switch.
  B. Enter the DISABLE SNMP ACCESS command.
  C. Enter the DISABLE SNMP command.
  D. Enter the DISABLE SNMP command and then reboot the switch.
  B. Enter the DISABLE SNMP ACCESS command.