Apple 9L0-010 Online Practice Questions and Exam Preparation

Apple 9L0-010 Online Questions & Answers

• Question 91:

  What step is required before upgrading the RAM in a Mac Pro (Early 2009)?

  A. Remove the processor tray.
  B. Remove the hard drive carriers.
  C. Remove the front inlet fan assembly.
  D. Remove the Optical Drive and Carrier.
  A. Remove the processor tray.

  ---

  Open computer, lay it down with access side facing up, and remove:

  

  Processor tray

• Question 92:

  Which of the following is a valid precaution you should take while working inside an iMac (27-inch, Mid 2010) system that is plugged into AC power but has not yet been powered on?

  A. Do not turn the unit upside-down.
  B. Avoid putting your fingers near the fans.
  C. Make sure you are NOT wearing a grounded ESD wrist strap.
  D. Do not touch the processor heat sink because it could burn your fingers.
  C. Make sure you are NOT wearing a grounded ESD wrist strap.

  ---

  Reminder: If the unit needs to be plugged in for LED checks or similar troubleshooting, do NOT wear anESD wrist strap. Any shock could be more dangerous since you are connected to ground

• Question 93:

  What precautions should be taken if a discharged CRT must remain exposed for any length of time?

  A. You should reset the Power Manager Unit on the logic board.
  B. You should perform a full set of video adjustments on the CRT
  C. You should remove the CRT from the computer or display assembly
  D. You should establish an ongoing lead between the CRT anode and ground.
  D. You should establish an ongoing lead between the CRT anode and ground.