Microsoft 70-680 Online Practice Questions and Exam Preparation

Microsoft 70-680 Online Questions & Answers

• Question 501:

  You have two computers named Computer1 and Computer2 that run Windows 7. Both computers are members of an Active Directory domain.

  Windows Remote Management (WinRM) is enabled on both computers.

  You need to remotely create additional disk volumes on Computer1 from Computer2.

  What should you do?

  A. On Computer2, run Winrs and then run Diskpart.
  B. On Computer2, run Winrs and then run Diskmgmt.msc.
  C. On Computer1, install the Telnet Client and then run Diskpart from Computer2.
  D. On Computer1, install the Telnet Client and then use Disk Management from Computer2.
  A. On Computer2, run Winrs and then run Diskpart.

  ---

  Winrs

  You can use WinRS to execute command-line utilities or scripts on a remote computer. To use WinRS, open a command prompt and prefix the command that you want to run on the remote computer with the WinRS r: RemoteComputerName

  command. For example, to execute the Ipconfig command on a computer named Aberdeen, issue the command: WinRS r:Aberdeen ipconfig

  The Windows Remote Management service allows you to execute commands on a remote computer, either from the command prompt using WinRS or from Windows PowerShell. Before you can use WinRS or Windows PowerShell for

  remote management tasks, it is necessary to configure the target computer using the WinRM command. To configure the target computer, you must run the command WinRM quickconfig from an elevated command prompt.

  Diskpart:

  Microsoft command-line tool Diskpart is used to create and format volumes on the target computer.

• Question 502:

  You administer a computer that has Windows 7 and Internet Explorer 8 installed. You discover that two users have installed a new toolbar in to their browsers. The toolbar is using an unapproved search engine.

  You need to prevent the users from using the unapproved search engine.

  What should you do?

  A. From Program and Features in the Control Panel, uninstall the toolbar.
  B. From Internet Explorer, delete the browsing history and all locally stored files.
  C. Start Internet Explorer in InPrivate Browsing session.
  D. From an elevated command prompt, run %systemdrive%\Program files\Internet Explorer\iecleanup.exe
  A. From Program and Features in the Control Panel, uninstall the toolbar.

• Question 503:

  A company has client computers that run Windows 7. You set up a virtual private network (VPN) infrastructure that encapsulates Point-to-Point Protocol (PPP) traffic over the Secure Sockets Layer (SSL) channel of the HTTPS protocol.

  You need to create the VPN connection on the company's client computers.

  Which type of VPN should you use? (To answer, select the appropriate setting or settings in the work area.)

  Hot Area:

  

  

  ---

  SSTP

  Secure Socket Tunneling Protocol (SSTP) is a new tunneling protocol that uses the HTTPS protocol over TCP port 443 to pass traffic through firewalls and Web proxies that might block PPTP and L2TP/IPsec traffic. SSTP provides a mechanism to encapsulate PPP traffic over the Secure Sockets Layer (SSL) channel of the HTTPS protocol. The use of PPP allows support for strong authentication methods, such as EAP-TLS. SSL provides transport-level security with enhanced key negotiation, encryption, and integrity checking.

• Question 504:

  You have a computer that runs Windows 7.

  You add a new hard disk drive to the computer and create a new NTFS partition.

  You need to ensure that you can use the Previous Versions feature on the new drive.

  What should you do?

  A. From Disk Management, convert the new disk to a dynamic disk.
  B. From System Properties, configure the System Protection settings.
  C. From System and Security, enable BitLocker Drive Encryption (BitLocker).
  D. From the properties of the new drive, create a share and modify the caching settings.
  B. From System Properties, configure the System Protection settings.

  ---

  System protection might not be turned on for the drive. If system protection is not turned on, Windows can't create previous versions. To turn on system protection:

  1.

  Click to open System.

  2.

  In the left pane, click System protection. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.

  3.

  Click the drive, and then click Configure.

  4.

  Click Restore system settings and previous versions of files, and then click OK.

• Question 505:

  You have a computer that runs windows 7.

  The computer has corporate intranet web site.

  Your Windows Internet Explorer as shown in the exhibit.

  

  You need to ensure that you can access web pages on both Internet and Intranet. What should you do?

  A. From the tools menu, click Work Offline.
  B. From the Safety menu, click InPrivate Blocking.
  C. From the Safety menu, click Inprivate Browsing.
  D. From the Security tab, add the intranet web site to the Trusted sites zone.
  A. From the tools menu, click Work Offline.

  ---

  Working Offline is activated On Internet Explorer's File menu is a "Work Offline" item that toggles Internet Explorer between online and offline modes of operation. (The question originally stated the Tools menu, maybe in a different version of IE this is the case, but for me and in the TechNet documentation it was under Files, so I'm choosing to believe Tools was a mistake and it should be Files, this has been amended in the question).

  InPrivate is turned on (does not prevent browsing the internet) InPrivate Browsing helps prevent Internet Explorer from storing data about your browsing session. This includes cookies, temporary Internet files, history, and other data. Toolbars and extensions are disabled by default.

• Question 506:

  You have a computer that runs Windows 7.

  Windows Backup is configured to store backups on an external drive.

  You create a new NTFS volume on the computer.

  You need to configure Windows Backup to include the files on the new volume as part of regularly scheduled backups.

  What should you do?

  A. From Backup and Restore, select Change settings.
  B. From Backup and Restore, select Create a system image.
  C. From the System Protection tab, create a restore point.
  D. From the System Protection tab, enable system protection for the new volume.
  A. From Backup and Restore, select Change settings.

  ---

  Backups are configured and scheduled by using the Backup And Restore console under System And Security in Control Panel. The Change Settings option is not available unless you have configured a backup schedule and performed a backup.

• Question 507:

  You have two computers named Computer1 and Computer2 that run Windows 7.

  You use Remote Desktop to connect from Computer1 to Computer2.

  You need to prevent the desktop background of Computer2 from being displayed when you use Remote Desktop to connect to Computer2.

  What should you do on Computer1?

  A. From the Personalization options, change the theme.
  B. From the System properties, modify the Remote settings.
  C. From the Remote Desktop Connection options, modify the Performance setting.
  D. From the Remote Desktop Connection options, modify the Display configuration settings.
  C. From the Remote Desktop Connection options, modify the Performance setting.

  ---

  Configuring the Desktop Experience You can configure the connection speed and fine-tune the desktop environment for optimal performance by using the settings located on the Experience tab of the Remote Desktop Connection tool. Most of these settings relate to the graphical nature of the desktop. Because the processing for graphics happens on the server and must be transmitted to the desktop over the network connection, you can increase performance by allowing only the minimal settings that are necessary for your users. When you choose a connection speed, the check boxes are automatically selected to indicate the recommended settings for the richest visual experience possible at that speed.

  Experience

  Configure the connection speed and adjust the desktop environment for optimal performance.

  Desktop background

  Allows user to choose a custom background or wallpaper for their desktop. Because these can be very graphicintensive, disable this setting unless it is necessary ur users.

  

• Question 508:

  You plan to deploy Windows 7 by using a virtual hard disk (VHD).

  You need to ensure that when a computer starts from the VHD, the Windows 7 installation programs will run the out-of-box-experience (OOBE) portion of the setup.

  What should you do?

  A. Copy install.wim from the Windows 7 installation media to the VHD.
  B. Use ImageX to apply install.wim from the Windows 7 installation media to the VHD.
  C. Start the computer by using the Windows 7 installation media and then select Install now.
  D. Start the computer by using the Windows Preinstallation Environment (Windows PE) and then run Diskprep.exe.
  B. Use ImageX to apply install.wim from the Windows 7 installation media to the VHD.

  ---

  WIM images are file-based and can be installed on a VHD or placed on a network share for distribution. You can store several images in the same WIM file. Talks about Capturing the Installation onto a Network Share, but still applies. You can capture an image of your reference computer by using Windows PE and the ImageX tool. Then you store that image on a network share. Alternatively, on a computer running Windows 7 Enterprise or Ultimate edition, you can store the image on a VHD and make that VHD bootable. To capture the installation image you have created on your reference computer to a network share, perform the following procedure:

  1.

  Insert your Windows PE media into your reference computer and restart the computer. As before, you may have to override the boot order to boot from the CD/DVD-ROM drive. If so, select the appropriate function key to override the boot

  order during initial boot.

  2.

  Windows PE starts and opens a command-prompt window. Use the ImageX tool located on your Windows PE media to capture an image of your reference computer installation. For example, if your optical drive is drive E:, your installation

  is on drive C:, and you want to capture the image on drive D:, you would enter:

  e:\imagex.exe /capture C:

  d:\installationimage.wim "my Win7 Install" /compress fast /verify

  3.

  Copy the image to a network location. For example, enter: net use y: \\network_share\images copy d:\myimage.wim y:

  4.

  If necessary, provide network credentials for appropriate network access. Your image is now on volume Y:

• Question 509:

  You have a computer that runs Windows 7.

  You run Runas and specify the /savecred parameter to start an application.

  You need to delete the stored password.

  What should you do?

  A. Run Del and specify the /p parameter.
  B. Run Runas and specify the /noprofile parameter.
  C. From Credential Manager, modify the Windows credentials.
  D. From Authorization Manager, modify the Authorization Manager options.
  C. From Credential Manager, modify the Windows credentials.

  ---

  Credential Manager Credential Manager stores logon user name and passwords for network resources, including file servers, Web sites, and terminal services servers. Credential Manager stores user name and password data in the Windows Vault. You can back up the Windows Vault and restore it on other computers running Windows 7 as a method of transferring saved credentials from one computer to another. Although Credential Manager can be used to back up some forms of digital certificates, it cannot be used to back up and restore the self-signed Encrypting File System (EFS) certificates that Windows 7 generates automatically when you encrypt a file. For this reason, you must back up EFS certificates using other tools. You will learn about backing up EFS certificates later in this lesson.

  

• Question 510:

  Which of the following is used to control when the security pop-up notifications are used?

  A. Security Control Manager
  B. User Account Control
  C. User Access Control Panel
  D. Notification Control Settings Manager
  B. User Account Control