Microsoft 70-643 Online Practice Questions and Exam Preparation

Microsoft 70-643 Online Questions & Answers

• Question 111:

  Your network contains a server that runs Windows Server 2008 R2.

  You install Windows Media Services on the server.

  You need to create an announcement file that allows Windows Media Player clients to decode multicast streams.

  Which file extension should you use for the announcement file?

  A. .asx
  B. .htm
  C. .nsc
  D. .wsx
  C. .nsc

  ---

  Announcing content

  Before you can stream content, you need to let your users know that it is available by using an announcement.

  An announcement is a Windows Media metafile with an .asx extension that provides the Player with the information needed to connect to a Windows Media server. to receive content. You can place a link to an announcement on a Web page,

  make the announcement available in a shared file, or send an announcement in an email message. Users can access your content either by clicking the link to the announcement on a Web page or by opening the announcement directly. The

  announcement wizards on the Announce tab of the Windows Media Services snap-in help you create announcement files (.asx files) and multicast information files (.nsc files) that players can use connect to your content. The wizards can also

  help you create a Web page with an embedded Windows Media Player control or provide you with the syntax to embed a Player in your own Web page.

  Source: http://technet.microsoft.com/en-us/library/cc753414.aspx

• Question 112:

  You manage a Web server named Server1 that runs Windows Server 2008 R2. Server1 has the FTP Server role service installed.

  You need to manage the FTP server settings on Server1.

  Which tool should you use?

  A. System Configuration
  B. Performance Monitor
  C. Internet Information Services (IIS) Manager
  D. Local Security Policy
  E. Security Configuration Wizard (SCW)
  F. Ftp
  G. Telnet
  H. Component Services
  I. Services
  J. Windows Firewall
  C. Internet Information Services (IIS) Manager

  ---

  Ref: http://technet.microsoft.com/en-us/library/dd722761(WS.10).aspx http://support.orcsweb.com/KB/a338/create-an-iis-75-ftp-site-windows-server-2008-r2.aspx

• Question 113:

  Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 has the Web Server (IIS) role installed. Server2 has the File Services role installed. Server1 has a Web site named Web1. Server2

  has a shared folder named Share1.

  You need to give users Web access to the content in Share1.

  What should you do on Server1?

  A. Modify the connection strings of Web1 and enable directory browsing on Web1.
  B. Modify the connection strings of Web1 and configure the default document of Web1.
  C. Add a virtual directory to Web1 and enable directory browsing on the virtual directory.
  D. Add a virtual directory to Web1 and configure the default document of the virtual directory.
  C. Add a virtual directory to Web1 and enable directory browsing on the virtual directory.

  ---

  

• Question 114:

  You have two servers named FC1 and FC2 that run Windows Server 2008 R2 Enterprise. Both servers have the Failover Clustering feature installed. You configure the servers as a two-node cluster. The cluster runs an application named APP1. Business hours for your company are 09:00 to 17:00. APP1 must be available during these hours. You configure FC1 as the preferred owner for APP1. You need to prevent failback of the cluster during business hours.

  What should you do?

  A. Set the Period option to 8 hours in the Failover properties.
  B. Set the Allow failback option to allow failback between 17 and 9 hours in the Failover properties.
  C. Enable the Prevent failback option in the Failover properties.
  D. Enable the If resource fails, attempt restart on current node policy for all APP1 resources. Set the Maximum restarts for specified period to 0.
  B. Set the Allow failback option to allow failback between 17 and 9 hours in the Failover properties.

  ---

  Failback timing You can set a group to fail back to its preferred node as soon as the Cluster service detects that the failed node has been restored, or you can instruct the Cluster service to wait until a specified hour of the day, such as after peak business hours.

  Important Failback only occurs when you have defined a preferred nodes list for a resource group and failback is allowed for that resource group. If you specify that a group failback to a preferred node and then restart the node to test the failback policy you set, the resource group will not failback. A resource group will not failback when a node is restarted after a planned shutdown and restart. To test the failback policy, you must press the reset button on the node.

  Source: http://technet.microsoft.com/en-us/library/cc737785.aspx

• Question 115:

  Your network contains four servers that run Windows Server 2008 R2. The servers are configured as shown in the following table.

  

  Server4 Remote Desktop Connection Broker (RD Connection Broker) Server2 and Server3 are configured as RemoteApp sources on Server4. You need to ensure that the RemoteApp programs are listed on the RD Web Access Web page on Server1.

  What should you do?

  A. On Server4, add Server1 to the Session Broker Computers group.
  B. On Server4, add Server1 to the TS Web Access Computers group.
  C. On Server1, add Server4 to the TS Web Access Administrators group.
  D. On Server1, add Server2 and Server3 to the TS Web Access Administrators group.
  B. On Server4, add Server1 to the TS Web Access Computers group.

  ---

  

  Populate the TS Web Access Computers Security Group If the RD Web Access server and the Remote Desktop Session Host (RD Session Host) server that hosts the RemoteApp programs are separate servers, you must add the computer account of the RD Web Access server to the TS Web Access Computers security group on the RD Session Host server. To add the computer account of the RD Web Access server to the security group On the RD Session Host server, click Start, point to Administrative Tools, and then click Computer Management.

  In the left pane, expand Local Users and Groups, and then click Groups. In the right pane, double-click TS Web Access Computers. In the TS Web Access Computers Properties dialog box, click Add. In the Select Users, Computers, or Groups dialog box, click Object Types. In the Object Types dialog box, select the Computers check box, and then click OK. In the Enter the object names to select box, specify the computer account of the RD Web Access server, and then click OK.

  Click OK to close the TS Web Access Computers Properties dialog box.

  Source: http://technet.microsoft.com/en-us/library/cc771623.aspx

• Question 116:

  Your network contains a server that has Microsoft SharePoint Foundation 2010 installed.

  You need to configure the incoming e-mail settings to use the Automatic settings mode.

  What should you do first?

  A. Configure the outgoing email settings.
  B. Configure the Message Queuing feature.
  C. Install the SMTP Server feature.
  D. Install the Message Queuing Triggers feature.
  C. Install the SMTP Server feature.

  ---

  When incoming email is enabled, SharePoint sites can receive and store email messages and attachments in lists and libraries. This article describes two scenarios, one basic and one advanced. The basic scenario applies to a single-server farm environment and is recommended if you want to use default settings, whereas the advanced scenario applies to a single-server farm or a multiple- server farm and contains several advanced options from which to choose.

  Install and configure the SMTP service Incoming email for SharePoint Foundation 2010 uses the SMTP service. You can use the SMTP service in one of two ways. You can install the SMTP service on one or more servers in the farm, or administrators can provide an email drop folder for email that is forwarded from the service on another server.

  Install the SMTP service If you are not using a drop folder for email, the SMTP service must be installed on every front-end Web server in the farm that you want to configure for incoming email. To install the SMTP service, use the Add Features Wizard in Server Manager. After the procedure is complete, a default SMTP configuration has been created. You can customize this default SMTP configuration to meet the requirements of your environment.

  To install the SMTP service

  1. Verify that you have the following administrative credentials:

  - You must be a member of the Administrators group on the local computer.

  2.

  Click Start, point to Administrative Tools, and then click Server Manager.

  3.

  In Server Manager, click Features.

  4.

  In Features Summary, click Add Features to open the Add Features Wizard.

  5.

  On the Select Features page, select SMTP Server.

  6.

  In the Add Features Wizard dialog box, click Add Required Features, and then click Next.

  7.

  On the Confirm Installation Selections page, click Install.

  8.

  On the Installation Results page, ensure that the installation finished successfully, and then click Close.

  Source: http://technet.microsoft.com/en-us/library/cc287879.aspx

• Question 117:

  Your network contains a server named Server1 that has Microsoft SharePoint Foundation 2010 installed. Server1 has a site named Intranet. Intranet contains a custom list named Sales. A user named User1 attempts to create an alert for a list item in the Sales list as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that Users1 can create alerts that are sent by text message.

  What should you do?

  A. From Central Administration, create a new trust relationship.
  B. From Central Administration, modify the mobile account settings.
  C. From Site Settings, modify the site permissions.
  D. From Site Settings, modify the RSS settings.
  B. From Central Administration, modify the mobile account settings.

• Question 118:

  You install the Web Server (IIS) server role on a server that runs Windows Server 2008 R2. You configure a Web site named contoso.com and a Web application named Accounting on the Web server.

  The Web server runs out of disk space. You move Accounting to another drive on the Web server.

  The following table shows the current application configuration:

  

  Users report that they cannot access the Accounting application. You need to enable users to access Accounting application. Which command should you run on the server?

  A. appcmd add app /site.name: contoso /path:/Accounting /physicalPath:d:\Accounting
  B. appcmd add app /site.name: contoso /path:/Accounting /physicalPath:f:\Accounting
  C. appcmd set app /site.name: contoso /path:/Accounting /physicalPath:d:\Accounting
  D. appcmd set app /site.name: contoso /path:/Accounting /physicalPath:f:\Accounting
  C. appcmd set app /site.name: contoso /path:/Accounting /physicalPath:d:\Accounting

  ---

  * The mentioned answer does not work in reallife, atleast not on Windows2008R2

  RTM.*

  But it is the awnser that looks syntax wise the most as the following:

  appcmd set app /app.name: contoso/Acctg /[path='/Accounting'].physicalPath:D:

  \Accounting Command Line

  To change the path of an application's content, use the following syntax:

  appcmd set app /app.name: string /[path='/'].physicalPath: string

  The variable app.name string is the virtual path of the application, and physicalPath string is the physical path of the application's content.

  For example, to change the physical path of the location D:\Acctg for an application named Acctg in a site named contoso, type the following at the command prompt, and then press ENTER:

  appcmd set app /app.name: contoso/Acctg /[path='/Accounting'].physicalPath:D:\Accounting

  Source: http://technet.microsoft.com/nl-nl/library/cc725781(WS.10).aspx

• Question 119:

  You have a server named Server1 that runs Windows Server 2008 R2. Server1 has the Key Management Service (KMS) installed. You need to identify how many computers were activated by Server1.

  What should you run?

  A. cliconfg.exe
  B. mrinfo.exe Server1
  C. slmgr.vbs /dli
  D. slui.exe
  C. slmgr.vbs /dli

  ---

  slmgr.vbs /dli - Retrieves the current KMS activation count from the KMS host.

  

  Source: http://technet.microsoft.com/en-us/library/ff793407.aspx

• Question 120:

  Your company runs Remote Desktop Services. You plan to install an application update for the lobapp.exe application on the Remote Desktop Session Host Server. You find instances of the lobapp.exe processes left behind by users who

  have disconnected.

  You need to terminate all instances of the lobapp.exe processes so that you can perform an application update.

  What are two possible ways to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

  A. Run the Get-Process cmdlet on the Remote Desktop Session Host Server.
  B. Run the Tskill lobapp /a command on the Remote Desktop Session Host Server.
  C. End all instances of lobapp.exe in the Remote Desktop Services Manager console.
  D. Run the Tasklist /fi "IMAGENAME eq lobapp.exe" command on the Remote Desktop Session Host Server.
  B. Run the Tskill lobapp /a command on the Remote Desktop Session Host Server.
  C. End all instances of lobapp.exe in the Remote Desktop Services Manager console.

  ---

  

  

  Wrong Answers:

  Tasklist

  Displays a list of currently running processes on the local computer or on a remote computer.

  Tasklist replaces the tlist tool.

  Source: http://technet.microsoft.com/en-us/library/cc730909(WS.10).aspx Get-Process Although the following will work for a single instance:

  (Get-Process lobapp).Kill()

  

  This will not work on multiple instances: (Get-Process lobapp).Kill()

  

  But one could argue that using the ForEach-Object commandlet circumvents the issue:

  (Get-Process lobapp)|ForEach-Object {$_.Kill()}

  However because this requires more than just the Get-Process cmdlet, I choose to render this answer invalid.