Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 641:

  Where does the witness VM reside in a Cisco Hyperflex Edge deployment?

  A. Windows application
  B. Hyper Rex Data Platform
  C. Cisco Intersight
  D. local HyperFlex datastore
  C. Cisco Intersight

• Question 642:

  An engineer must configure SAN connectivity in Cisco UCS manager. The requirement is to specify the WWPN of the storage array and set the zoning type to single initiator multiple targets. The engineer must also configure interrupt handling and queues of the vHBA interface.

  Which two Cisco UCS policies should be used to configure the settings? (Choose two.)

  A. SAN connectivity policy
  B. Fibre Channel adapter policy
  C. vHBA policy
  D. boot policy
  E. storage connection policy
  B. Fibre Channel adapter policy
  E. storage connection policy

• Question 643:

  A DevOps engineer must use Python to manage a Cisco device. The device is in a highly secure DMZ environment. Only trusted Cisco Python libraries can be used.

  Which solution meets the requirements?

  A. Develop an on-box Python script that uses trusted Cisco libraries.
  B. Develop an application by using serverless technologies in a primary cloud provider.
  C. Develop an off-box Python script that uses trusted Cisco libraries.
  D. Develop a containerization application that uses trusted Cisco-provided libraries.
  A. Develop an on-box Python script that uses trusted Cisco libraries.

• Question 644:

  An engineer must configure RBAC is Cisco UCS Manager in an existing data center environment.

  Which two roles can be used to configure LAN Connectivity policies? (Choose two.)

  A. network-admin
  B. server-profile
  C. admin
  D. enable
  E. operations
  A. network-admin
  C. admin

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-4/UCSM_GUI_Configuration_Guide_1_4_chapter9.html

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucsm_privileges/3-2/UCSM-Privileges-3_2/UCSM-Privileges-3_2_chapter_01.html

• Question 645:

  DRAG DROP

  Refer to the exhibit.

  

  Leaf3 is configured using distributed anycast gateway for the server connected using VLAN 2021.

  Drag and drop the configuration commands from the right onto the boxes in the code to deploy the distributed anycast gateway on Leaf 1 .

  Select and Place:

  

  

• Question 646:

  An engineer implements an ACI fabric and must implement microsegmentation of endpoints within the same IP subnet using a network-based attribute. The attribute mapping must allow IP subnet independence.

  Which attribute must be selected?

  A. IP
  B. tag
  C. custom
  D. MAC address
  D. MAC address

  ---

  Explanation

  If you want to use a network-based attribute and classify IP addresses in the same subnet, you must use the MAC-based network attribute. IP-based microsegmented EPGs do not support classification for IP addresses in the same subnet. IP-based microsegmented EPGs are supported only when traffic requires Layer 3 routing. If the traffic is bridged, the microsegmentation policy cannot be enforced.

• Question 647:

  A network engineer must download a firmware image from a remote location to a Cisco UCS Fabric Interconnect. The software bundle is over 232 MB in size. The file transfer must use encryption and authentication.

  Which protocol must be used to accomplish this goal?

  A. RDP
  B. HTTPS
  C. SCP
  D. TFTP
  C. SCP

• Question 648:

  Which Cisco Nexus Dashboard service distributes Cisco ACI network configuration policies and templates to different data centers?

  A. Nexus Orchestrator
  B. Nexus Insight
  C. Nexus Fabric Controller
  D. Nexus Data Broker
  A. Nexus Orchestrator

• Question 649:

  A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc1/1-12 and then for ports fc1/13-24 for the next 60 seconds. Ports in the range fc1/13-24 were already enabled for analytics.

  Which set of commands must be used to meet these requirements?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  B. Option B

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds9000-san-analytics-telemetry-streaming-config-guide-8x/configuring_san_telemetry-streaming.html

• Question 650:

  Refer to the exhibit.

  

  Which command needs to be added to the line starting with the "file" keyword to have the generated running-config file with the name `fusion-config_' and current date?

  A. ('fusion-config_ + date')
  B. str.('fusion-config_') + date
  C. string(('fusion-config_') + date)
  D. ('fusion-config_') + date
  D. ('fusion-config_') + date