350-601 Exam Details
-
Exam Code
:350-601 -
Exam Name
:Implementing and Operating Cisco Data Center Core Technologies (DCCOR) -
Certification
:CCIE Data Center -
Vendor
:Cisco -
Total Questions
:708 Q&As -
Last Updated
:Jul 09, 2026
Cisco 350-601 Online Questions & Answers
-
Question 661:
Refer to the exhibit.
An engineer must configure FCoE on a Cisco Nexus switch.
Which two command sets complete this configuration? (Choose two.)
A. Option A
B. Option B
C. Option C
D. Option D
E. Option E -
Question 662:
An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, one other policies. Also, the operations team requires the backup file to be in a human-readable format.
Which configuration set meets these requirements?
A. Type: All configuration Protocol: FTP
B. Type: Full state Protocol: SFTP
C. Type: Logical configuration Protocol: TFTP
D. Type: System configuration Protocol: SCP -
Question 663:
A network engineer must create a Python application to replace the process of manual Cisco ACI configuration. The engineer requires a tool to assist the engineer with the development process that must support a graphical user interface and allow a user to browse the Cisco ACI object model. For security reasons, the tool must prevent a user from making configuration changes to the target system.
Which two tools must be used to meet these requirements? (Choose two.)
A. ACI Toolkit
B. ACI Model
C. API Inspector
D. NX-API REST
E. Visore -
Question 664:
Refer to the exhibit.
The network management system that is located at 192.168.10.10 and port 2000 must receive traps from the Cisco UCS Manager called UCSM. The community name is Cisco123! and the SNMP version must be the most secure.
These two commands have already been configured on Cisco UCSM.
UCS-A# scope monitoring
UCS-A/monitoring # enable snmp
Which command set completes the SNMP configuration?
A. Option A
B. Option B
C. Option C
D. Option D -
Question 665:
Which device alias database is shown by this output?
switch# show device-alias database
device-alias name SampleName pwwn 24:37:00:e1:06:0b:27:56
A. inactive database
B. effective database
C. pending database
D. zoning database -
Question 666:
Refer to the exhibit.
A network administrator experiences these issues with the network:
PC1 is experiencing a buffering problem for video applications.
The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet.
The engineer wants to configure the required traffic capture to investigate the issue further Which configuration must be implemented to monitor the traffic?
A. N9K(config)# monitor session 5 rx N9K(config)# monitor session 5 tx N9K(config-monitor)# description Span_session_5 N9K(config-monitor)# source interface ethernet 1/1 N9K(config-monitor)# source interface ethernet 1/2 N9K(config-monitor)# destination interface ethernet 2/3
B. N9K(config)# monitor session 5 tx N9K(config-monitor)# description Span_session_5 N9K(config-monitor)# source interface ethernet 1/1 N9K (config-monitor)# source interface ethernet 1/2 N9K(config-monitor)# destination interface ethernet 2/3
C. N9K(config)# monitor session 5 tx N9K(config-monitor)# description Span_session_5 N9K(config-monitor)# source vlan 10-15 rx N9K(config-monitor)# source interface ethernet 1/2 N9K(config-monitor)# destination interface ethernet 2/3
D. N9K(config)# monitor session 5 rx N9K(config-monitor)# description Span_session_5 N9K(config-monitor)# source vlan 10 rx N9K(config-monitor)# source interface ethernet 1/2 N9K(config-monitor)# destination interface ethernet 2/3 -
Question 667:
Refer to the exhibit.
All switches are configured with the default OSPF priority.
Which configuration should be applied to ensure that the SW2 Cisco Nexus switch controls the LSA floods and advertises the network to the remaining nodes in the OSPFv2 area?
A. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 255
B. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 1
C. SW2# configure terminal SW2 (config)# router ospf 1 SW2 (config-router)# router-id 10.10.10.22
D. SW2# configure terminal SW2 (config)# interface ethernet 1/1 SW2 (config-if)# ip ospf priority 0 -
Question 668:
DRAG DROP
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Select and Place:
-
Question 669:
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
A. server storage to end-node count
B. port bandwidth to uplink bandwidth
C. edge ISL bandwidth to core ISL bandwidth
D. host bandwidth to storage bandwidth
E. switch processing power to end-node processing power -
Question 670:
An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment.
Which two policies must be configured to meet these requirements? (Choose two.)
A. Boot Policy
B. Global Policy
C. Power Control Policy
D. Maintenance Policy
E. Reboot Policy
Tips on How to Prepare for the Exams
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 350-601 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.