Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 561:

  Refer to the exhibit.

  

  An engineer must resolve a connectivity issue on a Cisco 9000 Senes Switch that was configured by using Ansible.

  The switch must be configured to meet these requirements Interface Gigabitethemet0/1 must be a member of VLAN 10 in access mode Interface Gigabetethernet0/2 must allow VLANs 10 and 20 in trunk mode, with native VLAN 20.

  Which set of actions must be taken to meet these criteria?

  A. Configure interface Giabitethernet0/2 in trunk mode Assign interface Gigabitethernet0/1 to VLAN10
  B. Configure interface Gigabitethernet0/1 in access mode Assign interface Gigabitethernet0/1 to VLAN10
  C. Configure interface Gigabttethemet0/1 in trunk mode Assign interface Gigabitethernet0/2 to VLAN20
  D. Configure interface Gigabitethernet0/2 in access mode Assign interface Giabitethernet0/2 to VLAN20
  A. Configure interface Giabitethernet0/2 in trunk mode Assign interface Gigabitethernet0/1 to VLAN10

• Question 562:

  A network engineer must deploy a configuration backup policy to the cisco UCS manager. The file generated from this backup must have a snapshot of the entire system that should be used to restore the system during disaster recovery. The backup file must be transferred insecurely by using the TCP protocol.

  Which configuration backup settings meet these requirements?

  A. Type: Logical Configuration Protocol: SFTP
  B. Type: Full State Protocol: FTP
  C. Type: All Configuration Protocol: SCP
  D. Type: System Configuration Protocol: TFTP
  B. Type: Full State Protocol: FTP

• Question 563:

  Refer to the exhibit.

  

  An engineer needs to implement streaming telemetry on a Cisco MDS 9000 Series Switch. The requirement is for the show command data to be collected every 30 seconds and sent to receivers.

  Which command must be added to the configuration to meet this requirement?

  A. snsr-grp 200 sample-interval 30000
  B. snsr-grp 200 sample-interval 30
  C. sensor-grp 200 sample-period 30
  D. sensor-grp 200 sample-period 30000
  A. snsr-grp 200 sample-interval 30000

  ---

  Explanation

  Link the sensor group with an ID to the subscription node and set the data streaming sample interval in milliseconds: switch(conf-tm-sub)# snsr-grp id sample-interval interval Note: The minimum streaming sample interval that is recommended is 30000.

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/san_analytics/cisco-mds9000-san-analytics-telemetry-streaming-config-guide-8x/configuring-san-telemetry-streaming.html

• Question 564:

  Refer to the exhibit.

  

  An engineer configures port security on a Cisco Nexus 9000 Series Switch. The requirement is to prevent any newly learned MAC addresses from forwarding traffic on the interface. Also, the already learned MAC addresses must not be affected by the changes.

  Which configuration meets these requirements?

  A. switchport port-security violation shutdown
  B. switchport port-security violation isolate
  C. switchport port-security violation protect
  D. switchport port-security violation restrict
  C. switchport port-security violation protect

• Question 565:

  Refer to the exhibit.

  

  A network engineer plans to upgrade the current software images of a Cisco Nexus switch.

  What is the impact of starting the EPLD upgrade?

  A. The switch reboots multiple times for the new EPLD versions to take effect.
  B. The switch reboots one time for the new EPLD versions to take effect.
  C. The switch skips the EPLD upgrade for MIFPGA and proceeds with the other EPLD devices.
  D. The switch skips the EPLD upgrade for each EPLD device of the switch.
  D. The switch skips the EPLD upgrade for each EPLD device of the switch.

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/92x/epld-rn/nxos_n9K_epldRN_924.html

• Question 566:

  A DevOps engineer must implement a bash script to query a REST API and return the available methods.

  Which code snippet completes the script?

  

  A. DELETE
  B. TRACE
  C. POST
  D. OPTIONS
  C. POST

• Question 567:

  DRAG DROP

  Drag and drop the items from the left into the corresponding columns as a feature or capability of inter sight Managed Mode or UCS Manager Mode.

  Select and Place:

  

  

• Question 568:

  What is the benefit of adding Cisco HyperFlex Hardware Acceleration Cards to a HyperFlex deployment?

  A. offline encryption acceleration
  B. increased network throughput
  C. GPU acceleration
  D. Increased compression efficiency
  D. Increased compression efficiency

  ---

  Explanation

  

  https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/Installation_VMWare_ESXi/3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5/b_HyperFlexSystems_Installation_Guide_for_VMware_ESXi_3_5_chapter_01100.html#:~:text=Overview%20of%20HyperFlex%20Hardware%20Acceleration%20Cards,-This%20chapter%20provides&text=These%20cards%20provide%20improved%20performance%20and%20compression%20efficiency%20for%20most%20storage%20workloads.

• Question 569:

  Where is the witness deployed in a two-node Cisco HyperFlex Edge deployment?

  A. to the HyperFlex Edge two-node cluster
  B. to an additional server with network access to HyperFlex Edge
  C. to a third-party cloud provider
  D. to Cisco Intersight
  D. to Cisco Intersight

  ---

  Explanation

  The Cisco HyperFlex Edge invisible cloud witness is only required for 2-node HX Edge deployments. correct, it has to connect to Intersight as it is a CLOUD invisible witness as per the document shared: The Cisco HyperFlexEdge invisiblecloud witnessis only requiredfor 2-nodeHX Edge deployments. The witness does not require any additional infrastructure, setup, configuration, backup, patching ,or management of any kind. This feature is automatically configured as part of a 2-node Hyper Flex Edge installation. Outbound access at the remote site must be present for connectivity to Intersight (eitherIntersight.com or to the Intersight Virtual Appliance). HyperFlexEdge 2- nodeclusters cannot operate without this connectivity in place

  https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/HyperFlex_HX_DataPlatformSoftware/Edge_Deployment_Guide/b_HyperFlex_Edge_Deployment_Guide_4_0.pdf

• Question 570:

  An engineer must integrate Cisco ACI with VMware vCenter. The virtualization team configured the necessary port groups and assigned them to virtual machines through VMware vCenter. The final port group configuration must be protected from being changed by Cisco APIC.

  Which action accomplishes these goals?

  A. Create the VMM domain with switch mode set to AVE.
  B. Set the VMM domain access mode to Read Only Mode.
  C. Configure the VMM domain with tag collection.
  D. Activate CDP and LLDP in the VMM domain.
  B. Set the VMM domain access mode to Read Only Mode.