Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 311:

  An engineer must configure RBAC in Cisco UCS Manager in an existing data center environment.

  Which two roles are suitable for configuring LAN connectivity policies? (Choose two.)

  A. server-profile
  B. network-admin
  C. operations
  D. enable
  E. admin
  B. network-admin
  E. admin

• Question 312:

  Refer to the exhibit.

  

  A network engineer must run a continuous capture on a port A script called ''capture'1 is created to start and stop the capture task.

  Which command sequence makes the capture persistent after a reboot?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  C. Option C

• Question 313:

  An engineer must remove the running configuration of a Cisco Nexus 9000 Series Switch and replace it with a backup file without restarting the switch. The backup file is stored on an SFTP server that is reachable via the mgmt0 interface.

  Which set of commands accomplishes this task?

  A. configure replace sftp://[email protected]/backup.cfg vrf mgmt0 copy running-config bootflash://startup-config
  B. copy sftp://[email protected]/backup.cfg bootflash:///backup.cfg vrf management configure replace bootflash:///backup.cfg
  C. copy sftp://[email protected]/backup.cfg startup-config vrf mgmt0 copy startup-config running-config
  D. copy sftp://[email protected]/backup.cfg startup-config vrf management reload in 10
  B. copy sftp://[email protected]/backup.cfg bootflash:///backup.cfg vrf management configure replace bootflash:///backup.cfg

• Question 314:

  An engineer performs a set of configuration changes for the vPC domain using Session Manager.

  Which two commands are used to verify the configuration and apply the device changes when no errors are returned? (Choose two)

  A. write
  B. verify
  C. commit
  D. checkpoint
  E. apply
  B. verify
  C. commit

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/system_management/configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_System_Management_Configuration_Guide/sm_7sessionmgr.html

  

• Question 315:

  An engineer is duplicating an existing Cisco UCS setup at a new site.

  What are two characteristics of a logical configuration backup of a Cisco UCS Manager database? (Choose two.)

  A. contains the AAA and RBAC configurations
  B. contains a file with an extension.tgz that stores all of the configurations
  C. contains the configuration organizations and locales
  D. contains all of the configurations
  E. contains the VLAN and VSAN configurations
  C. contains the configuration organizations and locales
  E. contains the VLAN and VSAN configurations

  ---

  Explanation

  Logical configuration--An XML file that includes all logical configuration settings such as service profiles, VLANs, VSANs, pools, and policies. You can use the file generated from this backup to import these configuration settings to the original fabric interconnect or to a different fabric interconnect.

  You cannot use this file for a system restore.

• Question 316:

  A Cisco Unified Computing System environment must be configured for a server that requites access to VLAN 30 for data and VLAN 40 for management The server must have failover capabilities.

  The upstream connectivity will be provided by using a Cisco Nexus 9000 Series Switch.

  Which action must be taken to meet these requirements?

  A. Use a single virtual network interface card for both VLANs and assign the vNlC lo a dynamic LAN pin group.
  B. Create a virtual network interface card for each VLAN and configure the host to use load balancing.
  C. Create a virtual network interface cards for each VLAN and enable vNIC fabric failover
  D. Use a single virtual network interface card for both VLANs and apply a network control policy for prioritization.
  C. Create a virtual network interface cards for each VLAN and enable vNIC fabric failover

• Question 317:

  Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 series switch that has dual supervisor modules and two I/O modules?

  A. install all kickstart <image>system<image>parallel
  B. install all epld bootflash:<image> parallel
  C. install all epld bootflash:<image>
  D. install all kickstart<image>system<image>
  A. install all kickstart <image>system<image>parallel

  ---

  Explanation

  

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/upgrade/guide/cisco_nexus7000_software_upgrade_and_downgrade_guide_8x.html

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/7_x/nx-os/upgrade/guide/b_Cisco_Nexus_7000_Series_NX-OS_Software_Upgrade_and_Downgrade_Guide_Release_7-x.html#d54e307a1635

• Question 318:

  Refer to the exhibit.

  

  An engineer implements SPAN configuration on an Nexus 5000 series switch.

  Which two commands are necessary to complete the SPAN session configuration?

  A. Configure the switchport monitor under interface fc2/2
  B. Configure the switchport mode SD under interface tc2/1.
  C. Configure switchport speed 4000 under interface fc2/2.
  D. Configure session type fc under monitor session 1.
  E. Configure the switchport mode SD under interface fc2/2.
  C. Configure switchport speed 4000 under interface fc2/2.
  E. Configure the switchport mode SD under interface fc2/2.

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/configuration/guide/cli/CLIConfigurationGuide/Span.html

• Question 319:

  DRAG DROP

  Drag and drop the mechanisms to collect data from a network from the left onto their characteristics on the right

  Select and Place:

  

  

• Question 320:

  Which data interchange format is presented in this output?

  

  A. XML
  B. YAML
  C. JSON
  D. CSS
  C. JSON