Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 441:

  Refer to the exhibit.

  

  Which statement is not true?

  A. Chassis 1 in blade 2 has a major fault.
  B. Those service profiles have a user acknowledge maintenance policy configured.
  C. If you check Acknowledge All and click Apply, the blades reload.
  D. Any user can acknowledge the reload
  D. Any user can acknowledge the reload

• Question 442:

  In a virtual port channel (vPC) configuration, VRRP exhibits which characteristic?

  A. VRRP does not work with vPC due to industry standard requirements
  B. VRRP works with vPC in traditional active/standby modes
  C. VRRP works with vPC in an active/active mode
  D. VRRP work with vPC as long as vPC peer-gateway is configured to address non- standard replies to the physical MAC address
  C. VRRP works with vPC in an active/active mode

• Question 443:

  A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below, what is the reason of this issue?

  switch# show npv status

  npiv is enabled

  External Interfaces:

  ===============

  InterfacE. fc1/1, VSAN: 1, FCID. 0x000000, StatE. Other

  Number of External Interfaces: 4

  A. NPV is not enabled on the core switch?
  B. The interface connected to the Core switch is in admin down state
  C. The local host interface belongs to the wrong VSAN?
  D. The local host interface is not able to login
  B. The interface connected to the Core switch is in admin down state

• Question 444:

  Which two products provide the ability to create eight VDCs? (Choose two.)

  A. Cisco Nexus 7000 Supervisor 2 Module
  B. Cisco Nexus 7000 Supervisor 1 Module
  C. Cisco Nexus 7700 Supervisor 1 Module
  D. Cisco Nexus 7700 Supervisor 2E Module
  E. Cisco Nexus 7000 Supervisor 2E Module
  D. Cisco Nexus 7700 Supervisor 2E Module
  E. Cisco Nexus 7000 Supervisor 2E Module

• Question 445:

  Which two statements about Cisco Nexus 1000V Series Switches are correct? (Choose two.)

  A. When VSM interfaces are created for a virtual machine, the VMware vSwitch port-group configuration is used initially, which requires the creation of a port-group name for these interfaces and an appropriate VLAN. The simplest configuration is to create a single port group (for example, VSM-Interfaces), that includes all the interfaces that use this port group and the same VLAN.
  B. The mgmt0 interface on the VSM does not necessarily require its own VLAN. In fact, you can use the same VLAN to which the VMware vCenter Server belongs. The VSM management VLAN is really no different from any other virtual machine data VLAN. Alternatively, network administrators can designate a special VLAN for network device management.
  C. Always deploy the Cisco Nexus 1000V Series VSM in pairs, with one VSM that is defined as the primary module and the other that is defined as the secondary module on two separate hosts.
  D. The service console is a critical interface that resides on every logical server.
  E. mgmt 0 interface on the VSM always use VLAN 1 for communication with VEM modules.
  B. The mgmt0 interface on the VSM does not necessarily require its own VLAN. In fact, you can use the same VLAN to which the VMware vCenter Server belongs. The VSM management VLAN is really no different from any other virtual machine data VLAN. Alternatively, network administrators can designate a special VLAN for network device management.
  C. Always deploy the Cisco Nexus 1000V Series VSM in pairs, with one VSM that is defined as the primary module and the other that is defined as the secondary module on two separate hosts.

• Question 446:

  Refer to the exhibit.

  

  Which type of SSL offload configuration is shown in the output?

  A. SSL termination
  B. SSL initiation
  C. end-to-end SSL
  D. SSL testing
  B. SSL initiation

• Question 447:

  When building a NIC team (virtual port channel) between a host and a pair of Cisco Nexus 5000 Series Switches that will carry FCoE traffic, what is the maximum number of physical links that can exist in the team?

  A. 1
  B. 2
  C. 4
  D. 5
  E. 16
  B. 2

• Question 448:

  How many VSM modes are there in a Cisco Nexus 1000V environment?

  B. 1
  C. 2
  D. 3
  E. 4
  F. 5
  D. 3

• Question 449:

  Your company wants Server 1/eth0 (vNIC 1) configured so that it always uses Fabric Interconnect A Port Channel 1 (Po1) when it communicates with anything outside of the Cisco UCS domain. However, if vNIC 1 fails over to Fabric Interconnect B using fabric failover, then vNIC 1 can use any uplink port on Fabric Interconnect B.

  Which statements are true? (Choose two.)

  A. The fabric interconnects must be in end-host mode.
  B. A pin group must be configured on the server tab in Cisco UCS Manager.
  C. In the service profile for Server 1, vNIC 1 must be explicitly assigned to a pin group.
  D. Server 1 cannot be configured to meet the requirement. A server can only be manually pinned to a single physical interface and not a port channel because of the LACP load- balancing algorithm.
  E. Server 1 cannot be configured to meet the requirement. A server is either manually pinned to an uplink on both fabric interconnects or the server is automatically pinned, but not both.
  A. The fabric interconnects must be in end-host mode.
  C. In the service profile for Server 1, vNIC 1 must be explicitly assigned to a pin group.

• Question 450:

  Refer to the exhibit.

  

  Which statement about the procedure to verify that the VSM is connected to vCenter Server is true?

  A. Install a new extension key and unregister the old extension key.
  B. Unregister the old extension key and install a new extension key
  C. Unregister the extension key.
  D. Install a new extension key.
  E. Issue no connect and connect commands.
  B. Unregister the old extension key and install a new extension key