Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 431:

  Drag Drop

  Select and Place:

  

  

• Question 432:

  Drag and drop the actions on the left to the correct order for a step-by-step FCIP link configuration on the right.

  Select and Place:

  

  

• Question 433:

  Refer to the Exhibit.

  

  Which two statements are true? (Choose two.)

  A. FC Zoning is going to be enabled automatically after the template is created.
  B. With the current fabric ID configuration on the vHBA template, cannot see the new VLAN
  C. All the required values have been configured in the vHBA template; after the VLAN is created, you can press OK start using the template.
  D. To modify the vHBA from the service profile in the future; you first must unbind the template from the vHBA fc0 template.
  E. VSAN and VLAN ID are assigned according to best practices.
  B. With the current fabric ID configuration on the vHBA template, cannot see the new VLAN
  D. To modify the vHBA from the service profile in the future; you first must unbind the template from the vHBA fc0 template.

• Question 434:

  An administrator is creating a service profile but receives an error when applying to a blade. The administrator checks the faults tab of the service profile and finds the following error (Refer to the exhibit).

  

  What is the cause of this error?

  A. vNIC has a Fibre Channel QoS policy assigned
  B. vHBA is assigned to a "best-effort" QoS policy
  C. vHBA has no QoS policy assigned
  D. vHBA is assigned to an incorrect VSAN
  E. vNIC has been assigned to an FCoE VLAN
  B. vHBA is assigned to a "best-effort" QoS policy

• Question 435:

  Refer to the exhibit.

  

  All Ethernet ports are trunked with VLANs 2 thru 10. The Cisco UCS domain is in end-host mode. Host A transmits a single broadcast frame on VLAN 4.

  Which statements are true? (Choose two.)

  A. Nexus 5548 A and Nexus 5548 B send a copy of the broadcast frame down all six ports to Fabric Interconnect A and Fabric Interconnect B.
  B. The deja vu mechanism on the fabric interconnects prevents the fabric interconnects from receiving multiple copies of the broadcast frame.
  C. All four vNICs receive a single copy of the broadcast frame.
  D. All four vNICs receive multiple copies of the broadcast frame on VLAN 4 but no broadcasts on any other VLAN.
  E. The spanning tree process prevents the vNICs from receiving multiple copies of the broadcast frame.
  F. The Reverse Path Forwarding mechanism prevents the vNICs from receiving multiple copies of the broadcast frame.
  A. Nexus 5548 A and Nexus 5548 B send a copy of the broadcast frame down all six ports to Fabric Interconnect A and Fabric Interconnect B.
  C. All four vNICs receive a single copy of the broadcast frame.

• Question 436:

  Which command sends a tet call home inventory message to start the registration process.

  A. test callhome inventory
  B. callhome inventory test
  C. callhome test inventory D. test inventory callhome
  C. callhome test inventory D. test inventory callhome

• Question 437:

  Lossless Ethernet for FCoE is achieved through the use of which features? (Choose two.)

  A. Priority flow control
  B. Buffer-to-buffer credits
  C. TCP retransmission
  D. Ethernet checksum
  E. QoS policies
  A. Priority flow control
  E. QoS policies

• Question 438:

  How many traffic monitoring sessions can you create on Cisco UCS Manager?

  A. 16
  B. 8
  C. 24
  D. 32
  A. 16

• Question 439:

  Refer to the exhibit.

  

  A new Nexus device, Router-B, was recently added to the network. The engineer wants to make Router-B the designated IGMP querier for this network. Which two configurations should be applied to the devices on the network to accomplish this goal? (Choose two.)

  A. Router-B(config)# interface Ethernet1/1 Router-B(config-if)# ip address 10.1.1.251 255.255.255.0
  B. Router-B(config)# interface Ethernet1/1 Router-B(config-if)# ip address 10.1.1.249 255.255.255.0 Router-B(config)# feature igmp
  C. Router-B(config)# interface Ethernet1/1 Router-B(config-if)# ip igmp version 2 Router-B(config)# feature igmp
  D. Router-B(config)# interface Ethernet1/1 Router-B(config-if)# ip igmp querier Router-B(config)# feature pim
  E. Router-B(config)# interface Ethernet1/1 Router-B(config-if)# ip pim sparse-mode
  B. Router-B(config)# interface Ethernet1/1 Router-B(config-if)# ip address 10.1.1.249 255.255.255.0 Router-B(config)# feature igmp
  E. Router-B(config)# interface Ethernet1/1 Router-B(config-if)# ip pim sparse-mode

• Question 440:

  What are the four vPath packet flow steps? (Choose four.)

  A. perform flow lookups
  B. intercept packets on service enabled ports
  C. run packets through the vPath flow manager
  D. classify the packets
  E. flow manager emits an action for the packets
  F. enforce the action determined by the flow manager
  B. intercept packets on service enabled ports
  C. run packets through the vPath flow manager
  E. flow manager emits an action for the packets
  F. enforce the action determined by the flow manager