Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 421:

  Which two options are health probes used in Cisco ACE? (Choose two.)

  A. RADIUS
  B. Layer 3 ping
  C. Round robin
  D. Cookie insert
  E. IP hash
  A. RADIUS
  B. Layer 3 ping

• Question 422:

  On a Cisco Nexus 7000, a CoPP can be applied separately to each VDC.

  A. True
  B. False
  B. False

• Question 423:

  Refer to the exhibit.

  

  Company ABC has implemented a Cisco TrustSec domain with an initial Cisco ACS server and Cisco Nexus 7000 CTS-DC.The company plans to extend the domain by adding an additional Cisco Nexus 7000 CTS-CORE. Which three minimum configurations are required on CTS-CORE to join the domain? (Choose three.)

  A. Configure TrustSec domain.
  B. Configure interface "cts dot1x".
  C. Configure local device ID and password.
  D. Configure as a "non-seed" device.
  E. Configure feature dot1x and cts.
  F. Configure RADIUS authentication, authorization, and accounting.
  B. Configure interface "cts dot1x".
  C. Configure local device ID and password.
  E. Configure feature dot1x and cts.

• Question 424:

  Where SAN Port Channel is created in UCS Manager?

  A. Under the Admin tab on the FI
  B. Under the Server tab in the service profile
  C. Under the SAN tab on each VSAN
  D. Under the Admin tab on the chassis
  E. Under the SAN tab on the Fabric Interconnect
  E. Under the SAN tab on the Fabric Interconnect

• Question 425:

  Which statement about soft pinning is incorrect?

  A. It is the default behaviour in Cisco UCS manager.
  B. When the VLAN validation fails, a VLAN mismatch fault with a severity of warning appears.
  C. Cisco UCS manager pins the vNIC to an uplink Ethernet port or port channel accordning to VLANmembership criteria.
  D. If no uplink Ethernet port or ether channel is configured with all VLANS on the vNIC, Cisco UCS managerdrops the traffic for all of the VLANS on the vNIC.
  B. When the VLAN validation fails, a VLAN mismatch fault with a severity of warning appears.

• Question 426:

  Refer to the exhibit.

  

  What is the purpose of this command on the Cisco Nexus 7000 switch?

  A. The command enables conversational learning on FabricPath VLANs 1 through 10 for the F Series module.
  B. The command enables the FabricPath protocol on VLANs 1 through 10.
  C. There is no need for this command because conversational learning is enabled by default for all VLANs.
  D. The command enables conversational learning on a classic Ethernet VLAN for the F Series module.
  D. The command enables conversational learning on a classic Ethernet VLAN for the F Series module.

• Question 427:

  What is the use of NPV in Cisco Unified Computing Systems? (Choose two.)

  A. Compatibility with third-party Fibre Channel switches
  B. Faster throughput
  C. Reduce domain IDs in a Fibre Channel environment
  D. Support for increased number of VSANs
  E. Support for SAN port channels
  A. Compatibility with third-party Fibre Channel switches
  C. Reduce domain IDs in a Fibre Channel environment

• Question 428:

  Which capabilities are not supported in DCNM device manager?

  A. Manage SNMPv3 security access to switches
  B. Save and copy configuration files and software images
  C. Configure VLANs and Ethernet port channels
  D. Manage 2148T FEX, 2232PP FEX, and 2248TP FEX
  E. Configure FCoE
  C. Configure VLANs and Ethernet port channels

• Question 429:

  A virtual port channel (vPC) allows links that are physically connected to two different Cisco Nexus devices to appear as a single port channel to a third device.

  Which are the mandatory steps for configuring vPC? (Choose six.)

  A. Enable feature vPC
  B. Define domains
  C. Establish peer keepalive connectivity
  D. Create a peer link
  E. Configure the peer link as a trunk port
  F. Create port channels and vPCs
  G. Define port channel load-balancing method
  H. Make sure configurations are consistent
  A. Enable feature vPC
  B. Define domains
  C. Establish peer keepalive connectivity
  D. Create a peer link
  F. Create port channels and vPCs
  H. Make sure configurations are consistent

• Question 430:

  Refer to the exhibit.

  

  Which three statements about the exhibit are true? (Choose three.)

  A. The differentiating characteristic of the Cisco Nexus 1000V Series is that it does not run Spanning Tree Protocol. This characteristic may seem to be a significant departure from other Ethernet switches, which might potentially cause catastrophic network loops. However, in reality, the Cisco Nexus 1000V Series implements a simple and effective loop- prevention strategy that does not require Spanning Tree Protocol.
  B. Because the Cisco Nexus 1000V Series does not participate in Spanning Tree Protocol, it does not respond to BPDU packets, nor does it generate them. BPDU packets that are received by Cisco Nexus 1000V Series Switches are dropped.
  C. The Cisco Nexus 1000V Series uses a simple technique to prevent loops. Like a physical Ethernet switch, the Cisco Nexus 1000V Series Switch performs source and destination MAC address lookups to make forwarding decisions. The VEM applies loop- prevention logic to every incoming packet on Ethernet interfaces.
  D. The Cisco Nexus 1000V Series uses a simple technique to prevent loops. Like any logical Ethernet switch, the Cisco Nexus 1000V Series Switch performs source and destination MAC address lookups to make forwarding decisions. The VEM applies loop- prevention logic to every incoming packet on Ethernet interfaces.
  E. Because the Cisco Nexus 1000V Series participates in Spanning Tree Protocol, it responds to BPDU packets, and it generate them. BPDU packets that are received by Cisco Nexus 1000V Series Switches are dropped.
  A. The differentiating characteristic of the Cisco Nexus 1000V Series is that it does not run Spanning Tree Protocol. This characteristic may seem to be a significant departure from other Ethernet switches, which might potentially cause catastrophic network loops. However, in reality, the Cisco Nexus 1000V Series implements a simple and effective loop- prevention strategy that does not require Spanning Tree Protocol.
  B. Because the Cisco Nexus 1000V Series does not participate in Spanning Tree Protocol, it does not respond to BPDU packets, nor does it generate them. BPDU packets that are received by Cisco Nexus 1000V Series Switches are dropped.
  C. The Cisco Nexus 1000V Series uses a simple technique to prevent loops. Like a physical Ethernet switch, the Cisco Nexus 1000V Series Switch performs source and destination MAC address lookups to make forwarding decisions. The VEM applies loop- prevention logic to every incoming packet on Ethernet interfaces.