Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 271:

  Refer to the exhibit.

  

  Which two reasons explain why vPC peer-switch is not working? (Choose two.)

  A. The feature is not enabled on the vPC peer.
  B. The peer keepalive link is down.
  C. Cisco Discovery Protocol is not configured.
  D. vPC peers are not the root of spanning tree topology.
  E. LoopGuard is disabled.
  A. The feature is not enabled on the vPC peer.
  D. vPC peers are not the root of spanning tree topology.

• Question 272:

  When you connect two Cisco devices through 802.1Q trunks, the devices exchange spanning tree BPDUs on each VLAN that is allowed on the trunks. Which two statements are correct about the BPDUs that are sent on the native VLAN of the trunk? (Choose two.)

  A. BPDUs are sent to the reserved IEEE 802.1D spanning tree multicast MAC address (01- 80-C2-00-00-00).
  B. BPDUs are sent to the reserved IEEE 802.1q spanning tree multicast MAC address (01- 80-C2-00-00-00).
  C. BPDUs are sent to the reserved SSTP multicast MAC address (01-00-0c-cc-cc-cd).
  D. BPDUs are tagged with the VLAN number when they are sent.
  E. BPDUs are untagged when they are sent.
  A. BPDUs are sent to the reserved IEEE 802.1D spanning tree multicast MAC address (01- 80-C2-00-00-00).
  E. BPDUs are untagged when they are sent.

• Question 273:

  Which three statements about ERSPAN are correct? (Choose three.)

  A. All ERSPAN replication is performed in the hardware. The supervisor CPU is not involved.
  B. ERSPAN and ERSPAN ACLs are supported for packets generated by the supervisor.
  C. You can configure a port as both a source and destination port.
  D. ERSPAN is not supported for management ports.
  E. A destination port can be configured in only one ERSPAN session at a time.
  F. Management ports support ERSPAN.
  A. All ERSPAN replication is performed in the hardware. The supervisor CPU is not involved.
  D. ERSPAN is not supported for management ports.
  E. A destination port can be configured in only one ERSPAN session at a time.

• Question 274:

  Refer to the exhibit.

  

  You create a service profile within ORG C with two vNICs. Each vNIC is assigned to the MAC pool named "vmware". Which two possible MAC addresses could be assigned to the vNICs? (Choose two.)

  A. 00:25:B5:FF:00:01
  B. 00:25:B5:EE:00:01
  C. 00:25:B5:DD:00:01
  D. 00:25:B5:BB:00:01
  E. 00:25:B5:AA:00:01
  A. 00:25:B5:FF:00:01
  D. 00:25:B5:BB:00:01

• Question 275:

  Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile?

  A. boot policy and BIOS policy
  B. disk scrub and boot policy
  C. BIOS setting scrub, boot policy, and BIOS policy
  D. disk scrub and BIOS setting scrub
  D. disk scrub and BIOS setting scrub

• Question 276:

  A load balancer can be defined as a network device that makes forwarding decisions that are based on parameters in Layers 4 to 7 of the OSI model. Which three parameters are involved in forwarding decisions? (Choose three.)

  A. TCP Destination Port
  B. DNS Record
  C. HTTP Session Cookie
  D. SNMP GET
  E. String recognized in the connection data
  F. Uniform Resource Locater
  A. TCP Destination Port
  C. HTTP Session Cookie
  E. String recognized in the connection data

• Question 277:

  Which three predictors are supported on ACE to select the best server to fulfill a client request? (Choose three.)

  A. Hash Address, which selects the server by using a hash value that is based on the source IP address, the destination IP address, or both
  B. Hash URL, which selects the server by using a hash value that is based on the requested URL
  C. Hash MAC, which selects the server by using a hash value that is based on the source MAC address, the destination MAC address, or both
  D. Hash Header, which selects the server by using a hash value that is based on the HTTP header name
  E. Highest bandwidth, selects the server that processed the highest amount of network traffic based on the average bandwidth that the server used over a specified number of samples
  F. First Come First Server, always selects the first server in the list of real servers.
  A. Hash Address, which selects the server by using a hash value that is based on the source IP address, the destination IP address, or both
  B. Hash URL, which selects the server by using a hash value that is based on the requested URL
  D. Hash Header, which selects the server by using a hash value that is based on the HTTP header name

• Question 278:

  Which option describes the default roles available to RBAC on Cisco Nexus switches?

  A. admin, operator, network-admin, and network-operator
  B. admin, read-only, network-admin, and network-operator
  C. vdc-admin, vdc-operator, network-admin, and network-operator
  D. vdc-admin, vdc-operator, network-admin, and network-operator (for Nexus 7000) and network-admin and network-operator (for other Nexus switches)
  E. admin and read-only
  A. admin, operator, network-admin, and network-operator

• Question 279:

  Drag Drop

  Select and Place:

  

  

• Question 280:

  Refer to the exhibit.

  

  Which three statements are true? (Choose three.)

  A. Zoning is configured on the upstream SAN switch
  B. Storage is attached directly to Cisco UCS.
  C. There are 14 blades active in the system.
  D. The Cisco UCS Manager is in switch mode.
  E. Two separate physical SAN switches are upstream of Cisco UCS.
  F. There are 7 blades active in the system.
  G. The Cisco UCS Manager is in end-host mode.
  H. Zoning is configured on Cisco UCS Manager.
  A. Zoning is configured on the upstream SAN switch
  F. There are 7 blades active in the system.
  G. The Cisco UCS Manager is in end-host mode.