Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 261:

  Which three statements best describe multicast operation on Cisco Nexus switches in a data center? (Choose three.)

  A. Cisco NX-OS Software does not support PIM dense mode.
  B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch.
  C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command.
  D. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.
  E. The default PIM operational mode on the Cisco Nexus 7000 switch is SSM.
  A. Cisco NX-OS Software does not support PIM dense mode.
  C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command.
  D. Cisco NX-OS Software supports multicast routing per Layer 3 VRF instance.

• Question 262:

  When creating a QoS policy dialog box in Cisco UCSM, which four fields can be modified? (Choose four.)

  A. name
  B. best-effort
  C. burst
  D. rate
  E. host control
  A. name
  C. burst
  D. rate
  E. host control

• Question 263:

  Which three flow-control port states lead to enabled link flow control? (Choose three.)

  A. Receive port: Enabled, Transmit port: Enabled
  B. Receive port: Enabled, Transmit port: Desired
  C. Receive port: Enabled, Transmit port: Disabled
  D. Receive port: Disabled, Transmit port: Desired
  E. Receive port: Desired, Transmit port: Desired
  A. Receive port: Enabled, Transmit port: Enabled
  B. Receive port: Enabled, Transmit port: Desired
  E. Receive port: Desired, Transmit port: Desired

• Question 264:

  n1kv-l3(config)# show lacp offload status

  Current Status : Enabled

  Running Config Status : Enabled

  Saved Config Status : Disabled

  What two facts does the output signify? (Choose two.)

  A. LACP is enabled on the Nexus 1000v.
  B. LACP will be offloaded to the upstream switch.
  C. LACP will be negotiated to the VM.
  D. LACP is negotiated by the VSM.
  E. LACP is negotiated by the VEM in all instances.
  A. LACP is enabled on the Nexus 1000v.
  E. LACP is negotiated by the VEM in all instances.

• Question 265:

  Dynamic ARP inspection ensures that only valid ARP requests and responses are relayed. Which three activities does a Cisco NX-OS device perform when DAI is enabled and properly configured? (Choose three.)

  A. Verifies that each of these intercepted packets has a valid IP -to-MAC address binding based only on DHCP snooping binding database.
  B. Verifies that each of these intercepted packets has a valid IP -to-MAC address binding based only on DHCP snooping binding database or statically created entries.
  C. Intercepts ARP request and responses on all ports.
  D. Pass-through an invalid ARP packets.
  E. Drops invalid ARP packets.
  F. Intercepts ARP request and responses only on untrusted ports.
  B. Verifies that each of these intercepted packets has a valid IP -to-MAC address binding based only on DHCP snooping binding database or statically created entries.
  E. Drops invalid ARP packets.
  F. Intercepts ARP request and responses only on untrusted ports.

• Question 266:

  Drag and drop the Cisco UCS Manager RBAC term on the left to the correct definition on the right.

  Select and Place:

  

  

• Question 267:

  Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager? (Choose three.)

  A. The fabric interconnect is in the end-host mode, and all uplink ports have failed.
  B. The server port to which the adapter is pinned has failed.
  C. A transient error has caused the link to fail.
  D. The fabric interconnect is in the switch mode, and all uplink ports have failed.
  E. The link for a network-facing host interface is missing.
  A. The fabric interconnect is in the end-host mode, and all uplink ports have failed.
  B. The server port to which the adapter is pinned has failed.
  C. A transient error has caused the link to fail.

• Question 268:

  Which two actions are necessary to configure FCoE on the Cisco Nexus 7000 switches? (Choose two.)

  A. The Cisco Nexus 7000 has the FCoE feature enabled.
  B. The system quality of service is disabled.
  C. The dedicated and shared interfaces are configured.
  D. The two required storage virtual device contexts are created.
  E. The module is licensed for Layer 2 and Layer 3.
  A. The Cisco Nexus 7000 has the FCoE feature enabled.
  C. The dedicated and shared interfaces are configured.

• Question 269:

  When testing ICMP access to a functional load-balancing ACE VIP, it fails. What is the reason of this problem? (Choose two.)

  A. The interface is shut down
  B. An access list is denying ICMP
  C. Routing is not configured properly
  D. vip icmp-reply is inactive
  B. An access list is denying ICMP
  D. vip icmp-reply is inactive

• Question 270:

  Which two statements about disjoint Layer 2 networks are true? (Choose two.)

  A. Ethernet Switching mode must be end-host mode.
  B. Overlapping vlans are supported.
  C. Each vNIC can communicate with all the disjoint Layer 2 networks.
  D. Symmetrical configuration is recommended for high availability.
  E. Default VLAN 1 can be configured explicitly on an Uplink Ethernet Port or Port Channel
  F. Appliance port cannot be configured with the same VLAN as Uplink Ethernet Port or Port Channel.
  A. Ethernet Switching mode must be end-host mode.
  D. Symmetrical configuration is recommended for high availability.