Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 191:

  Given the following output: San-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24:0c:00:0d: ec :d3 :5c:00 Admin port mode is NP, trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member [1]: fc2/3 Member [2]: fc2/4 What does "Speed is 8 Gbps" indicate?

  A. The speed of the slowest interface in the port channel
  B. The combined speed of all interfaces configured in the port channel
  C. The combined speed of all interfaces in the port channel that are up
  D. The speed that can be achieved if all buffers are used
  C. The combined speed of all interfaces in the port channel that are up

• Question 192:

  Which Ethernet field is used to differentiate between the FCoE frame and the FIP frame?

  A. Ethernet FCS
  B. Source address
  C. Destination address
  D. EtherType
  E. Protocol type
  D. EtherType

• Question 193:

  Refer to the exhibit.

  

  You are connecting a Cisco Nexus 2000 to an existing Cisco UCS Fabric Interconnect domain for C-Series integration. Which option describes the next Cisco Nexus 2000 that will be discovered?

  A. FEX0101
  B. FEX0003
  C. FEX0102
  D. FEX1000
  E. FEX1001
  B. FEX0003

• Question 194:

  Drag Drop

  Select and Place:

  

  

• Question 195:

  Which option lists valid network interfaces for VSM?

  A. Layer 2, Layer 3, and keepalive
  B. control, management, and packet
  C. management, Layer 2, and Layer 3
  D. management, packet, and VSM
  B. control, management, and packet

• Question 196:

  Which of the following is a feature of Fabric Extender?

  A. The Fabric Extender provides two user queues for its QoS support, one for all no-drop classes and one for all drop classes.
  B. The class-all-flood and class-ip-multicast class maps are used on the Fabric Extender.
  C. The Fabric Extender inherits the CoS configured on the upstream switch.
  D. For a Cisco Nexus 2248PQ 10GE Fabric Extender, all fabric interfaces can be bundled into a single fabric port channel.
  A. The Fabric Extender provides two user queues for its QoS support, one for all no-drop classes and one for all drop classes.

• Question 197:

  Which statement describes SNMP functionality in Cisco NX-OS Software?

  A. NX-OS Software supports one instance of SNMP globally for all VDCs; however, MIB counters are collected and reported individually per VDC.
  B. SNMP must be enabled with the feature snmp command before any SNMP configuration is possible.
  C. SNMP is always enabled by default in NX-OS Software and cannot be disabled.
  D. NX-OS Software supports 3DES and AES for SNMPv3 message encryption.
  E. SNMP always uses the default VRF on the Cisco Nexus 7000 Series Switches.
  D. NX-OS Software supports 3DES and AES for SNMPv3 message encryption.

• Question 198:

  Which two options describe devices as they operate in FabricPath topologies? (Choose two.)

  A. Edge (or leaf) devices: These devices have ports that are connected to classic Ethernet devices (servers, firewalls, router ports, and so on) and ports that are connected to the FabricPath cloud (or FabricPath ports). Edge devices are able to map a MAC address to the destination switch ID.
  B. Spine devices: These devices exclusively interconnect edge devices. Spine devices switch exclusively based on the destination switch ID.
  C. Edge (or leaf) devices: These devices have ports that are connected to classic Ethernet devices (servers, firewalls, router ports, and so on) and ports that are connected to the FabricPath cloud (or FabricPath ports). Edge devices are able to map a source address to the destination switch ID.
  D. Spine devices: These devices exclusively interconnect edge devices. Spine devices switch exclusively based on the source switch ID.
  A. Edge (or leaf) devices: These devices have ports that are connected to classic Ethernet devices (servers, firewalls, router ports, and so on) and ports that are connected to the FabricPath cloud (or FabricPath ports). Edge devices are able to map a MAC address to the destination switch ID.
  B. Spine devices: These devices exclusively interconnect edge devices. Spine devices switch exclusively based on the destination switch ID.

• Question 199:

  Which four port types are included in the VLAN port count? (Choose four.)

  A. border uplink Ethernet ports
  B. border uplink EtherChannel member ports
  C. FCoE ports in a SAN cloud
  D. static and dynamic vNICs created through service profiles
  E. VLANs
  F. VSANs
  G. Private VSANs
  H. Private VLANs
  A. border uplink Ethernet ports
  B. border uplink EtherChannel member ports
  C. FCoE ports in a SAN cloud
  D. static and dynamic vNICs created through service profiles

• Question 200:

  FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? (Choose three.)

  A. FabricPath provides MAC address scalability with conversational learning
  B. Loop mitigation with TTL in the frame field
  C. STP independence
  D. 10 Gbps bandwidth
  E. Layer 2 extensions between data centers
  A. FabricPath provides MAC address scalability with conversational learning
  B. Loop mitigation with TTL in the frame field
  C. STP independence