Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 181:

  How many virtual interfaces do the Cisco UCS 1280, 1240, and 1225 Virtual Interface Cards support?

  A. 128
  B. 64
  C. 256
  D. 1024
  E. 100
  C. 256

• Question 182:

  Refer to the exhibit.

  

  If uplink 1 fails, to which addresses will Fabric Interconnect B transmit a GARP on Uplink 2?

  A. AA and BB only
  B. C1 and C2 only
  C. A1, B1, AA, and BB
  D. AA, BB, C1, and C2
  E. No GARPs will be transmitted
  D. AA, BB, C1, and C2

• Question 183:

  Which SCSI action returns a list of logical unit numbers to which additional commands may be issued?

  A. Read Capacity
  B. Test Unit Read
  C. Report LUNs
  D. Read
  E. Inquiry
  C. Report LUNs

• Question 184:

  On a Cisco UCS B250 server, how many physical DIMM slots make up one logical DIMM?

  A. 2
  B. 3
  C. 4
  D. 6
  E. 12
  A. 2

• Question 185:

  FabricPath brings the benefits of routing protocols to Layer 2 network Ethernet environments. Which thee options describe advantages of using FabricPath technology? (Choose three.)

  A. MAC address scalability with conversational learning
  B. loop mitigation with TTL in the frame field
  C. Spanning Tree Protocol independence
  D. 10-Gb/s bandwidth
  E. Layer 2 extensions between data centers
  A. MAC address scalability with conversational learning
  B. loop mitigation with TTL in the frame field
  C. Spanning Tree Protocol independence

• Question 186:

  What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager? (Choose three.)

  A. Cisco UCS Manager 1.3(xx) or later and a pair of Nexus 2248 FEXes
  B. Cisco UCS Manager 2.0(2xx) or later and a pair of Nexus 2232 FEXes
  C. Two Cisco UCS 6100 Series or 6200 Series fabric interconnects
  D. Two RJ45 Ethernet cables
  E. The fabric interconnects must be in end-host mode
  B. Cisco UCS Manager 2.0(2xx) or later and a pair of Nexus 2232 FEXes
  C. Two Cisco UCS 6100 Series or 6200 Series fabric interconnects
  D. Two RJ45 Ethernet cables

• Question 187:

  A Cisco Nexus 7000 switch is used with the VRF feature to provide separation between the inside and outside interfaces of a transparent firewall.

  The VRF RED is used for an untrusted network of the virtual data center, and it is connected to the outside interface of the firewall. The VRF GREEN is used as a trusted network of the virtual data center and is connected to the inside

  interface of the firewall. Subnet 10.10.10.0/20 is used to communicate between two VRFs across the transparent firewall.

  The firewall is configured correctly. The network administrator configured the VRFs and IP addressing correctly, but you are still unable to communicate across the firewall.

  

  What is a likely cause of the problem?

  A. This topology is incorrect. A transparent firewall cannot be used with VRF.
  B. On Cisco Nexus 7000, policy-based routing is required to communicate between two VRFs.
  C. The issue is related to software licensing; an Enterprise Services license is required on Cisco Nexus 7000.
  D. The issue is related to the MAC address of the SVI.
  E. The issue is related to keepalive, which is not supported on the SVI.
  D. The issue is related to the MAC address of the SVI.

• Question 188:

  Cisco Nexus 5000 Series Switches are best positioned at which layer?

  A. access layer, as an end-of -row switch for FCIP and iSCSI aggregation
  B. distribution layer, with multiples of 10 Gb/s ports
  C. access layer, as a top-of - rack switch for server I/O consolidation with FCoE
  D. aggregation layer, supporting virtual security and application services
  C. access layer, as a top-of - rack switch for server I/O consolidation with FCoE

• Question 189:

  The FCoE VLAN is used to carry FIP and FCoE traffic for the corresponding VSAN. Which two statements about this mapping are true? (Choose two.)

  A. The VLAN-VSAN mapping must be configured consistently in the entire fabric.
  B. This mapping can only carry Fibre Channel control and data traffic.
  C. There must be same VLANs on the A and B SANs.
  D. IP traffic is allowed if the interface is set to Shared.
  E. The VLAN must match the CNA setting.
  A. The VLAN-VSAN mapping must be configured consistently in the entire fabric.
  B. This mapping can only carry Fibre Channel control and data traffic.

• Question 190:

  Enabling jumbo frame support on a Cisco Nexus 5500 Switch can be done through which method?

  A. Changing the default policy map from a default MTU of 1500 to 9216
  B. Using the command system jumbomtu 9216
  C. Using the command interface MTU 9216
  D. Configuring the default Ethernet system class to an MTU of 9216 with a new network QoS policy map
  D. Configuring the default Ethernet system class to an MTU of 9216 with a new network QoS policy map