Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 171:

  Refer to the exhibit.

  

  What is the most likely reason for the error?

  A. There are not enough local hard drives to satisfy the local disk configuration policy.
  B. One of the resource pools is depleted (WWN, MAC, UUID).
  C. The destination blade is equipped with an M61KR-B adapter.
  D. The server is not equipped with adequate memory.
  E. A User Ack maintenance policy has been applied.
  C. The destination blade is equipped with an M61KR-B adapter.

• Question 172:

  Refer to the exhibit.

  

  Which two things can be determined from the SEL log output? (Choose two.)

  A. The server experienced a crash.
  B. The server experienced correctable memory errors.
  C. DIMMs in channel 2 are experiencing memory errors.
  D. DIMMs in channel 0 are experiencing memory errors.
  E. Memory errors have crossed two thresholds.
  B. The server experienced correctable memory errors.
  E. Memory errors have crossed two thresholds.

• Question 173:

  What is the benefit of the Priority-Based Flow control feature in Data Center Bridging?

  A. provides the capability to manage a bursty, single traffic source on a multiprotocol link
  B. enables bandwidth management between traffic types for multiprotocol links
  C. addresses the problem of sustained congestion by moving corrective action to the network edge
  D. allows autoexchange of Ethernet parameters between switches and endpoints
  A. provides the capability to manage a bursty, single traffic source on a multiprotocol link

• Question 174:

  When will an "all configuration" backup be imported into the Cisco UCS Manager?

  A. During the initial configuration from the console
  B. Once the basic configuration has been applied
  C. To restore the configuration on a secondary fabric interconnect
  D. To upgrade the firmware on a replacement fabric interconnect
  B. Once the basic configuration has been applied

• Question 175:

  Which protocol is used in the exchange of DCB capabilities?

  A. DCBX
  B. 802.1Qaz
  C. LLDP
  D. LACP
  E. FCoE
  C. LLDP

• Question 176:

  On a Cisco UCS B250 M2 server that is fully populated with 1333-MHz memory and an E5640 CPU, what is the fastest speed the memory can run at?

  A. 800 MHz
  B. 900 MHz
  C. 1066 MHz
  D. 1333 MHz
  E. 1666 MHz
  C. 1066 MHz

• Question 177:

  A Cisco Application Control Engine Appliance (ACE) non-admin context does not support "sticky" configuration. What is the reason for this issue?

  A. ACE sticky license is not installed
  B. ACE stickiness is not supported in a non-admin context
  C. ACE stickiness resources are not defined in an admin context
  D. Stickiness is configured properly in the CCIE virtual context
  C. ACE stickiness resources are not defined in an admin context

• Question 178:

  KAL-AP on the Cisco ACE allows communication with Cisco ACE Global Site Selector, to report virtual IP and real server availability. Which statement is true about KAL-AP?

  A. It is a Cisco propriety keepalive.
  B. It supports a maximum of 256 KAL-AP entries.
  C. It supports a maximum of 256 KAL-AP keepalives.
  D. It is used for both Cisco and non-cisco load balancers
  A. It is a Cisco propriety keepalive.

• Question 179:

  Which statement about Cisco Unified Fabric switches is correct?

  A. The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode.
  B. The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch.
  C. The Nexus 7000 Series Switches can support the NPIV mode of operation, but cannot function as a complete Fibre Channel Forwarder.
  D. The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR.
  E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.
  E. The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions.

• Question 180:

  NPV and NPIV are features that are used to overcome resource limitations in which Fibre Channel field?

  A. FCID
  B. Domain ID
  C. WWPN
  D. LUN ID
  E. VSAN
  B. Domain ID