Cisco 350-080 Online Practice Questions and Exam Preparation

Cisco 350-080 Online Questions & Answers

• Question 151:

  Which two actions must be done before configuring iSCSI boot for a server? (Choose two.)

  A. The storage array must be licensed for iSCSI boot.
  B. The operating system must be iBFT-compatible.
  C. Zoning must be configured.
  D. Boot parameters must be configured in the global group policy.
  E. IP subnet of iSCSI initiator has to be in the same subnet as that of storage array.
  A. The storage array must be licensed for iSCSI boot.
  B. The operating system must be iBFT-compatible.

• Question 152:

  Which two statements about VDC configuration and limitations are true? (Choose two.)

  A. Standard VDCs cannot share interfaces, VLANs, or VRF tables.
  B. Any user can create VDCs.
  C. Only the network administrator role can use the switchto vdc command.
  D. After a network administrator uses the switchto vdc command, the network administrator becomes a VDC administrator for the new VDC.
  E. There is no CLI command to return to the original VDC.
  A. Standard VDCs cannot share interfaces, VLANs, or VRF tables.
  D. After a network administrator uses the switchto vdc command, the network administrator becomes a VDC administrator for the new VDC.

• Question 153:

  Where is FIP negotiated?

  A. between E Nodes and VF ports
  B. between E Nodes and F Nodes
  C. between VF ports
  D. between VN ports
  E. between VN ports and VF ports and FCFs
  E. between VN ports and VF ports and FCFs

• Question 154:

  On Cisco Nexus 7000 Series Switch Cisco FabricPath domain, one switch becomes the root for the multidestination tree. Cisco FabricPath IS-IS will automatically select root switches for each multidestination tree. One of the parameters used to select the root is system ID.

  Which statements are true about system ID? (Choose two.)

  A. System ID is a unique 12-bit SID.
  B. System ID is a 48-bit value composed of the VDC MAC address.
  C. Higher system ID is preferred.
  D. Lower system ID is preferred.
  B. System ID is a 48-bit value composed of the VDC MAC address.
  C. Higher system ID is preferred.

• Question 155:

  Refer to the exhibit.

  

  During troubleshooting of vPCs, it is observed that virtual port channel 2 is in the down state. Based on the show command output, what is a possible cause of this issue?

  A. The virtual port channel is down because LACP is not enabled on the remote switch.
  B. The virtual port channel is down because of a VLAN mismatch.
  C. The virtual port channel is down because of an MTU mismatch.
  D. The virtual port channel is down because of a VLAN and MTU mismatch.
  C. The virtual port channel is down because of an MTU mismatch.

• Question 156:

  Given the following configuration, what command can be used to determine the physical path that traffic will be sent out upon? Port-profile type Ethernet name vm-data Switchport mode trunk Switchport trunk allowed vlan 200-210 Channel-group auto mode on mac-pinning State enabled Vmware port-group No shut

  Port-profile type vethernet name vlan-200 Switchport mode access Switchport vlan 200 State enabled Vmware port-group No shut

  A. module vem X execute vemcmd show trunk
  B. show module 3 internal pinning
  C. module vem X execute vemcmd show port
  D. show module vem mapping
  E. show interface vethX pinning
  C. module vem X execute vemcmd show port

• Question 157:

  Which statement about the Adapter FEX feature on the Cisco Nexus 5000 Series Switches is true?

  A. Adapter FEX is a software feature that can be configured on any CNA as long as the Nexus 5000 is running a version of code that supports Adapter FEX.
  B. Adapter FEX can be thought of as a way to divide a single physical link into multiple virtual links or channels.
  C. Packets on each channel are tagged with an 801.Q header that has a specific source VIF.
  D. When using a dual-homed NIC on the server, active/standby is not supported. Only active/active is supported.
  B. Adapter FEX can be thought of as a way to divide a single physical link into multiple virtual links or channels.

• Question 158:

  On a Nexus 5000 Series Switch, when a VFC is not online, what are the causes? (Choose three.)

  A. LLDP transmit and receive are disabled
  B. The initiator server has no connectivity to the target storage
  C. FIP negotiation timing
  D. Peer does not support LLDP
  E. VSAN trunk protocol has been enabled
  A. LLDP transmit and receive are disabled
  B. The initiator server has no connectivity to the target storage
  D. Peer does not support LLDP

• Question 159:

  Traffic drop for FCoE is experienced across a Nexus 5548 switch. What is a possible cause?

  A. Server's CNA does not support DCBX and PFC TLV was not negotiated.
  B. A "no-drop" class has not been configured for FCoE.
  C. The system is running with the default QOS policies.
  D. The link is oversubscribed.
  A. Server's CNA does not support DCBX and PFC TLV was not negotiated.

• Question 160:

  Which three statements describe the configuration change management feature in DCNM LAN? (Choose three.)

  A. Switch profiles allow configurations to be synchronized between switches and are supported with any Cisco NX-OS Software managed device.
  B. DCNM LAN can archive configurations from devices even if they are not managed by the DCNM server, and the administrator can supply the device management IP address and credentials.
  C. You can archive a maximum of 50 configuration versions per managed device.
  D. Managed devices must be licensed in DCNM LAN before they can be used with configuration change management.
  E. Device-running configuration will be archived only if it differs from the last archived version.
  C. You can archive a maximum of 50 configuration versions per managed device.
  D. Managed devices must be licensed in DCNM LAN before they can be used with configuration change management.
  E. Device-running configuration will be archived only if it differs from the last archived version.