Cisco 300-615 Online Practice Questions and Exam Preparation

Cisco 300-615 Online Questions & Answers

• Question 41:

  Refer to the exhibit.

  

  An engineer configures the server port on a Cisco Nexus 5000 Series Switch. The switch connects to an NPV edge switch port. The server fails to send the FC traffic to the fabric. Which action resolves the issue?

  A. Enable the NPIV mode on the Cisco Nexus 5000 switch.
  B. Match the VSAN membership on both ends of the connection.
  C. Configure the BB_credit buffer on the uplink port.
  D. Replace the SFP in slot fc2/12.
  B. Match the VSAN membership on both ends of the connection.

  ---

• Question 42:

  Refer to the exhibits.

  

  An engineer is implementing the SAN based on the Cisco MDS 9000 Series Switches. When operating the environment, the engineer encounters the error shown. Which action resolves the issue?

  A. Copy VSAN 101 to the fabric binding database on the MDS-1 switch
  B. Add the World Wide Name of the neighboring switch to the MDS-1 switch
  C. Configure the port security feature on the MDS-1 switch
  D. Enable VSAN 101 on the peer MDS 2 switch fabric interconnect
  B. Add the World Wide Name of the neighboring switch to the MDS-1 switch

  ---

  https://overlaid.net/2014/08/22/fc-security-for-ccie-dc-fabric-binding/

• Question 43:

  

  Refer to the exhibit. A newly deployed Cisco APIC1 fails to discover a Cisco Nexus Series Switch. Which configuration resolves the issue?

  A. APIC1# acidiag restart mgmt APIC1# acidiag reboot
  B. APIC1# acidiag touch clean APIC1# acidiag reboot
  C. Leaf101#(config)# no boot nxos Leaf101# copy running-config startup-config Leaf101# reload
  D. Leaf101# setup-clean-config.sh Leaf101# reload
  D. Leaf101# setup-clean-config.sh Leaf101# reload

  ---

• Question 44:

  

  Refer to the exhibit. The Cisco UCS server that is connected to a Fibre Channel over Ethernet fails to connect to the storage device. The engineer verified that all cables are connected correctly and analyzed packet flow in the Cisco UCS domain. Which step must be taken next to resolve the issue?

  A. Use the converged network adapter that supports DCBX.
  B. Activate the STP port.
  C. Set the VSAN trunk protocol.
  D. Enable LLDP to be received.
  D. Enable LLDP to be received.

  ---

• Question 45:

  

  Refer to the exhibit. Two Cisco ASA firewalls are configured in an active/standby cluster with eBGP in VXLAN fabric. The BGP routes are dropped and failed to install inside the BGP table of Inside and Outside VRFs. Which set of actions resolve the issue?

  A. On Leaf3, add local-as 65102 no-prepend replace-as to bgp Outside VRF. On Leaf4, add local-as 65101 no-prepend replace-as to bgp Inside VRF.
  B. On Leaf3, add local-as 65100 no-prepend replace-as to bgp Outside VRF. On Leaf4, add local-as 65000 no-prepend replace-as to bgp Inside VRF.
  C. On Leaf3, add local-as 65000 no-prepend replace-as to bgp Outside VRF. On Leaf4, add local-as 65102 no-prepend replace-as to bgp Inside VRF.
  D. On Leaf3, add local-as 65101 no-prepend replace-as to bgp Outside VRF. On Leaf4, add local-as 65102 no-prepend replace-as to bgp Inside VRF.
  A. On Leaf3, add local-as 65102 no-prepend replace-as to bgp Outside VRF. On Leaf4, add local-as 65101 no-prepend replace-as to bgp Inside VRF.

  ---

• Question 46:

  Refer to the exhibit.

  

  An engineer deploys a SAN environment with two interconnected Cisco MDS 9000 Series Switches. When the engineer attempts a zone merge, it fails with the error that is presented in the exhibit. Which action resolves the issue?

  A. Import or export a zone set between the switches to synchronize the switches.
  B. Change the name of one of the zones to match the other zone set.
  C. Set the distribute policy of the zone to full.
  D. Ensure that the zone members have different names.
  D. Ensure that the zone members have different names.

  ---

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/troubleshooting/guide/N5K_Troubleshooting_Guide/n5K_ts_sans.html https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/troubleshooting/guide/ts_guide.pdf

• Question 47:

  

  Refer to the exhibit. An engineer is troubleshooting a VSAN membership issue on switch N9K_1 where vfc 13 is associated to VSAN 1 instead of VSAN 10. The Cisco UCS, N9K_2, and QoS configurations have been verified.

  Which additional configuration on N9K_1 must be implemented to resolve the issue?

  A. interface vfc 13 bind fcoe vsan 10
  B. vlan 10 bind fcoe vsan 10
  C. vsan database vsan 10 interface vfc 13
  D. vsan 10 database bind interface vfc 13
  C. vsan database vsan 10 interface vfc 13

  ---

• Question 48:

  Refer to the exhibit.

  

  An engineer is investigating a role mapping issue on a switch. The users report that they cannot view the IP addresses under the tenant "corp". Which action resolves the issue?

  A. Add the users to the RADIUS server.
  B. Update the UNIX ID.
  C. Configure the correct secret password between the APIC and the RADIUS server.
  D. Add the updated avpair to include/corp/admin/
  C. Configure the correct secret password between the APIC and the RADIUS server.

  ---

• Question 49:

  An engineer is troubleshooting a custom AV pair that was created by a client on an external authentication server to map a read-only role for a specific security domain. Which AV pair solves the problem?

  A. shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2
  B. shell:domains=Security_Domain_1/Write_Role_1|Read_Role_2
  C. shell=Security_Domain_1/Read_Role_1|Read_Role_2
  D. shell:domains=Security_Domain_1/Read_Role_1|Read_Role_2
  A. shell:domains=Security_Domain_1//Read_Role_1|Read_Role_2

  ---

• Question 50:

  Refer to the exhibit.

  

  The HSRP configuration in the exhibit fails to function. Which action resolves this issue?

  A. Enable IP redirects.
  B. Set the MTU to 1500 bytes.
  C. Configure HSRP version 2.
  D. Configure the same HSRP group on both devices.
  A. Enable IP redirects.

  ---