Cisco 300-180 Online Practice Questions and Exam Preparation

Cisco 300-180 Online Questions & Answers

• Question 401:

  Which of these does not have an FSM associated with it?

  A. vCenter connection
  B. service profile
  C. server hardware
  D. service profile templates
  D. service profile templates

• Question 402:

  Which two commands check for DIMM errors in a Cisco UCS environment? (Choose two.)

  A. UCS-TEST/chassis#show error-recovery
  B. UCS-TEST/chassis/server/memory-array#show stats
  C. UCS-TEST/chassis/server#show execute-disable
  D. UCS-TEST/chassis/server/memory-array #show block
  E. UCS-TEST/chassis/server#show memory-array detail
  F. UCS-TEST/chassis/server#show error-recovery
  B. UCS-TEST/chassis/server/memory-array#show stats
  E. UCS-TEST/chassis/server#show memory-array detail

• Question 403:

  You receive this error message:

  2016 Jan 30 1111:11 N7K-CCNP %STP-2-L2GW_BACKBONE_BLOCK:L2 Gateway Backbone port inconsistency blocking port Ethernet2/13 on VLAN0054

  Which situation can trigger this event on a switch that is running FabricPath?

  A. The VLAN is configured incorrectly on the access port.
  B. Bridge assurance is configured incorrectly on one side
  C. The switch edge port is not configured as the root of the STP domain.
  D. There is an STP type mismatch with an adjacent switch.
  D. There is an STP type mismatch with an adjacent switch.

• Question 404:

  Storage VDC creation has failed. Which two steps should be taken before creating the storage VDC? (Choose two.)

  A. Check that the F1 module has the FCoE license installed.
  B. Check that the FCoE feature is enabled on the N7K.
  C. Check that you have allocated the interfaces of the F module on the VDC.
  D. Check that the network QoS non-drop policy is configured for FCoE traffic.
  E. Check that the FCoE VLANs are allocated on the VDC.
  F. Check that the M2 module has the FCoE license installed.
  B. Check that the FCoE feature is enabled on the N7K.
  D. Check that the network QoS non-drop policy is configured for FCoE traffic.

• Question 405:

  A customer has two data centers. In both data centers, the customer has two Cisco Nexus 7000 switches. For redundancy, the customer implemented HSRP and vPC. The customer implemented OTV to extend VLAN 325 between data centers and the customer has one default gateway over the four Cisco Nexus 7000 switches. The customer attempts HSRP filtering over the DCI link with HSRP group 325. Which MAC address should be filtered over the DCI network?

  A. 0000.0c9f.f145
  B. 0000.0C07.A145
  C. 001e.0C9F.F145
  D. 001e.0C07.A145
  A. 0000.0c9f.f145

• Question 406:

  A customer is troubleshooting the CIMC and resets the CIMC. Which three settings are defaults for the CIMC after it is reset? (Choose three.)

  A. SSH and Telnet are disabled from accessing the CIMC CLI.
  B. HTTPS enabled for accessing the CIMC GUI.
  C. A user account named admin exists that has a password of password.
  D. DHCP is disabled on the management port.
  E. The boot order is EFI, CDROM, PXE (using LoM), FDD, and HDD.
  F. KVM and vMedia are disabled.
  G. USB is disabled.
  B. HTTPS enabled for accessing the CIMC GUI.
  C. A user account named admin exists that has a password of password.
  E. The boot order is EFI, CDROM, PXE (using LoM), FDD, and HDD.

• Question 407:

  You create a storage VDC. The FCoE links fail to initialize correctly. Which command should you run to verify that you have correctly associated the VLAN to the VSAN?

  A. show vdc storage membership
  B. show vdc fcoe-vlan-range
  C. show vlan fcoe
  D. show vdc vlan-vsan-range
  C. show vlan fcoe

• Question 408:

  Which log file in Cisco UCS Manager contains information about which user took a specific action?

  A. user access log
  B. system change log
  C. audit log
  D. access control log
  C. audit log

• Question 409:

  You have a Cisco Nexus 1000V Series Switch that fails to connect to its VEMs. Which reason could cause this issue?

  A. The standby VSM is offline.
  B. The packet and control interfaces use the same VLAN.
  C. The VMware vCenter firewall allows ports 80 and 443 only.
  D. The capability I3control command is set on the packet interface.
  C. The VMware vCenter firewall allows ports 80 and 443 only.

• Question 410:

  After a Cisco UCS Manager upgrade, you discover issues relating to the IQN of several service profiles. Which two options are possible causes of the problem? (Choose two.)

  A. duplicate service profiles
  B. a duplicate IQN within a service profile
  C. a duplicate IQN across multiple service profiles
  D. an unsuccessful upgrade
  E. incorrect VSAN settings
  B. a duplicate IQN within a service profile
  C. a duplicate IQN across multiple service profiles