Cisco 300-180 Online Practice Questions and Exam Preparation

Cisco 300-180 Online Questions & Answers

• Question 131:

  Which statement is true regarding the admin VDC?

  A. All licensed features and feature sets must be enabled from the admin VDC.
  B. Fabric extenders connected to the admin VDC must be statically pinned.
  C. Only the mgmt 0 interface is allocated to the admin VDC.
  D. All interfaces other than mgmt 0 are allocated to the default VDC.
  E. The admin context can only be created on Supervisor 2/2E.
  F. The admin VDC is a new feature in Cisco NX-OS version 6.0.
  C. Only the mgmt 0 interface is allocated to the admin VDC.

• Question 132:

  You are no longer seeing updates to the device-aliases database on your Cisco Nexus 5596UP Switch. Which command is useful to determine if the scope of Cisco Fabric Services application distribution was being administratively limited?

  A. N5K2# show cfs region
  B. N5K2# show cfs scope
  C. N5K2# show cfs locale
  D. N5K2# show cfs acl
  E. N5K2# show cfs firewall
  A. N5K2# show cfs region

• Question 133:

  Refer to the exhibit.

  

  In the initial SAN deployment or after topology changes in the SAN, some hosts cannot communicate with storage. What are three possible causes of the problem? (Choose three.)

  A. misconfigured fabric timers
  B. misconfigured port parameters
  C. VSAN pruning
  D. VSAN trunking issues
  E. VLAN problems
  F. mismatched zoning
  A. misconfigured fabric timers
  B. misconfigured port parameters
  F. mismatched zoning

• Question 134:

  A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B-Series blade server; however, the boot fails. What is the cause of this failure?

  A. The local disk must be the first device in the boot order.
  B. eUSB is not a supported boot device.
  C. eUSB support is available only on the Cisco UCS C-Series rack server.
  D. eUSB is not the first device in the boot order for the server.
  D. eUSB is not the first device in the boot order for the server.

• Question 135:

  What is the default number of dynamic VNICs that is specified by the Cisco UCS Manager when creating a dynamic vNIC connection policy?

  A. 256
  B. 54
  C. 128
  D. 257
  B. 54

• Question 136:

  On a Cisco UCS B-Series data center environment; how many default roles are there when utilizing RBAC for security restriction?

  A. 1
  B. 5
  C. 10
  D. 15
  E. 20
  C. 10

• Question 137:

  When configuring LLDP on Cisco Nexus 5548 Switch, what is the purpose of LLDP hold time global configuration command?

  A. LLDP holdtime option is to set the length of time in milliseconds that a device should save LLDP information received before discarding it.
  B. LLDP holdtime option is to set the length of time in seconds that a device should save LLDP information received before discarding it.
  C. LLDP holdtime option is to set the length of time in milliseconds to wait before performing LLDP initialization on any interface.
  D. LLDP holdtime option is to set the length of time in seconds to wait before performing LLDP initialization on any interface.
  B. LLDP holdtime option is to set the length of time in seconds that a device should save LLDP information received before discarding it.

• Question 138:

  Which occurrence happens during an ISSU in a single supervisor configuration?

  A. The control plane is offline for up to 300 seconds
  B. NTP sessions stay alive and active.
  C. FLOGI/fdisc or logo requests from servers fail until the ISSU is complete.
  D. The time-to-live value tor CDP is increased (360 seconds) if it is less than the recommended timeout value.
  C. FLOGI/fdisc or logo requests from servers fail until the ISSU is complete.

• Question 139:

  On the secondary vPC switch, under which circumstance does the vPC autorecovery feature not bring up the vPC member ports?

  A. Peer link fails, and subsequently, the peer-keepalive link fails.
  B. Peer link is up, and the peer-keepalive link fails.
  C. Both vPC peers are reloaded, and the primary does not come back up.
  D. Peer link fails, and subsequently, the primary switch fails.
  B. Peer link is up, and the peer-keepalive link fails.

• Question 140:

  Which command should you use to ping an N Port?

  A. traceroute
  B. ping fcoe
  C. fcping
  D. ping
  C. fcping