Cisco 300-101 Online Practice Questions and Exam Preparation

Cisco 300-101 Online Questions & Answers

• Question 891:

  Which ospf area prevent LSA type 4 , LSA type 5 ( choose two)

  A. not so stubby area
  B. total stubby area
  C. stubby area
  D. totally not-so-stubby area
  B. total stubby area
  D. totally not-so-stubby area

• Question 892:

  DSW1#

  Jul 15 17:13:40.483 bst: %TCP-6-BADAUTH: Invalid MD5 digest from 5.0.0.5(13355) to 51.51.51.1 (179)

  DSW1#

  Jul 15 17:13:45.394 bst: %TCP-6-BADAUTH: Invalid MD5 digest from 5.0.0.5(15418) to 51.51.51.1 (179)

  Refer to the exhibit. All neighbor routers are in the BGP peer group named PEER-1. All passwords are configured as cisco. These messages are logged to the console of router DSW1, which is peering with router Core. Which two

  configurations allow a peering session to form between DSW1 and the Core? (Choose two)

  A. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-2 Core(config-router)#neighbor PEER-1 password cisco
  B. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
  C. DSW1(config-router)#neighbor 51.51.51.1 peer-group PEER-1 DSW1(config-router)#neighbor PEER-1 password cisco
  D. DSW1(config-router)#neighbor 51.51.51.1 peer-group PEER-1 DSW1(config-router)#neighbor PEER-2 password cisco
  E. DSW1(config-router)#neighbor 5.0.0.5 peer-group PEER-1 DSW1(config-router)#neighbor PEER-1 password cisco
  B. Core(config-router)#neighbor 5.0.0.5 peer-group PEER-1 Core(config-router)#neighbor PEER-1 password cisco
  C. DSW1(config-router)#neighbor 51.51.51.1 peer-group PEER-1 DSW1(config-router)#neighbor PEER-1 password cisco

• Question 893:

  Which SNMP model and level can provide DES encryption?

  A. SNMPV2 noAuthNoPriv
  B. SNMPV3 authNoPriv
  C. SNMPV3 authPriv
  D. SNMPV3 noAuthNoPrv
  C. SNMPV3 authPriv

• Question 894:

  Refer to the exhibit.

  

  Which statement about the configuration is true?

  This configuration is incorrect because the MTU must match the ppp-max-payload

  A. That is defined.
  B. This configuration is incorrect because the dialer interface number must be the same as the dialer pool number
  C. This configuration is missing an IP address on the dialer interface
  D. This configuration represents a complete PPPoE client configuration on an Ethernet connection.
  D. This configuration represents a complete PPPoE client configuration on an Ethernet connection.

• Question 895:

  Refer to the Exhibit. Which effect of this configuration is true?

  

  A. R1 synchronizes with systems that include authentication key 5 in their packets.
  B. R1 acts as an authoritative clock with a priority ID of 1.
  C. R1 acts as an authoritative clock at stratum 5.
  D. R1 is the NTP client for a stratum 1 server.
  C. R1 acts as an authoritative clock at stratum 5.

• Question 896:

  Refer to the exhibit.

  

  You have correctly identified the inside and outside interfaces in the NAT configuration of this device. Which effect of this configuration is true?

  A. static NAT
  B. PAT
  C. dynamic NAT
  D. NAT64
  B. PAT

• Question 897:

  Which two configurations can a PPPoE client support? (Choose two.)

  A. The client is connected to multiple hosts over DMVPN.
  B. The client is connecting over an ATM PVC/
  C. The client is installed on a native IPv6 network.
  D. Eight clients are configured on a single CPE.
  E. The client is installed on the same network device as the server.
  A. The client is connected to multiple hosts over DMVPN.
  D. Eight clients are configured on a single CPE.

• Question 898:

  Refer to the exhibit. Which BGP attribute can be used to influence traffic from AS200 and AS300 to enter AS100 via link 1?

  

  A. AS-path
  B. weight
  C. local preference
  D. MED
  A. AS-path

• Question 899:

  What is the function of the snmp-server enable traps and snmp-server host 192.168.1.3 trap version 1c public commands?

  A. to allow only 192.168.1.3 to access the system using the community-string public
  B. to allow private communications between the router and the host.
  C. to collect information about the system on a network management server
  D. to disable all SNMP informs that are on the system
  C. to collect information about the system on a network management server

• Question 900:

  What is the minimum privilege level to enter all commands in usermode?

  A. Level 1
  B. Level 0
  C. Level 14
  D. Level 15
  A. Level 1