NetApp NS0-182 Online Practice Questions and Exam Preparation

NetApp NS0-182 Online Questions & Answers

• Question 91:

  You complete a hardware installation on a CN1610 switch and establish a serial connection to the RJ45 port.

  In this scenario, the established serial connection allows the installer to complete which two tasks for the switches initial configuration? (Choose two.)

  A. to view network information that has been dynamically assigned to the management interface by the DHCP server on the network
  B. to use the serial port connection as a diagnostic channel to the second CN1610 switch in the cluster interconnect
  C. to configure the switch with another CN1610 switch using Cross-Stack EtherChannel configuration for load balancing and performance
  D. to manually configure the static network information
  A. to view network information that has been dynamically assigned to the management interface by the DHCP server on the network
  D. to manually configure the static network information

• Question 92:

  You have just completed the installation of a FAS9000 HA pair with ONTAP 9.5.

  In this scenario, according to NetApp best practices, which two tests verify the HA failover functionality? (Choose two.)

  A. Pull the motherboard out of the slot.
  B. Disconnect the HA interconnect cabling.
  C. Power cycle the node.
  D. Invoke a system core.
  C. Power cycle the node.
  D. Invoke a system core.

• Question 93:

  A customer is settings up a new cluster. The customer notices that there are many management ports on the cluster. The customer is know the purpose of the node management network LIF. What do you tell customer in this scenario?

  A. The node management LIF provides multiple IP address for managing a particular node in the cluster at the hardware level and is used for system maintenance.
  B. The node management LIF is associated with a storage virtual machine (SVM) and is used for communicating with client.
  C. The node management LIF provides a dedicated IP address for the entire cluster and can fail over to any node management or data port in the cluster.
  D. The node management LIF provides a dedicated a IP address to managing a particular node in the cluster and is used for system maintenance.
  D. The node management LIF provides a dedicated a IP address to managing a particular node in the cluster and is used for system maintenance.

• Question 94:

  Starting with ONTAP 9.5, what is the maximum number of HA pairs that are supported when using a SAN cluster?

  A. 4
  B. 2
  C. 6
  D. 8
  A. 4

• Question 95:

  You are adding two new nodes into an existing switchless 2-node cluster. Which two statements are true in this scenario? (Choose two.)

  A. You first need to install the cluster interconnect switches to the existing cluster.
  B. You must make sure that the existing nodes are healthy and that all cluster links are up.
  C. The existing cluster must use clustered Data ONTAP 8.1 or later software.
  D. You need to schedule downtime to add these two nodes.
  A. You first need to install the cluster interconnect switches to the existing cluster.
  B. You must make sure that the existing nodes are healthy and that all cluster links are up.

• Question 96:

  Which type of partitioning would you use when installing a FAS8200 with 24 SAS drives running ONTAP 9.5?

  A. root-root-data partitioning
  B. root-data-data partitioning
  C. root-data partitioning
  D. root-root-data-data partitioning
  B. root-data-data partitioning

• Question 97:

  

  You want to create a new intercluster LIF for cross-cluster replication and use the CLI. After you create the nac101_intercluster_lif_icl LIF, you are not able to see the LIF in the list of local intercluster LIFs. Referring to the exhibit, what is the problem?

  A. The assigned port for the intercluster e1c LIF is in the down admin state.
  B. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.
  C. The LIF that was created has the wrong role type.
  D. The home node of the new intercluster LIF has reached the maximum of four intercluster LIFs.
  B. The intercluster LIF has assigned an IP address that is not in the intercluster VLAN.

• Question 98:

  Node 3 has taken over Node 4. You are attempting to access Node 4 on its management interface but cannot do it. In this scenario, how would you access Node 4's management interface?

  A. You must use the Service Processor; node management LIFS do not fall over between nodes.
  B. You have not waited long enough for the failover timeout for a node management LIF; there is a
  C. broadcast domain configured for this situation.
  D. You should use SSH directly to one of the cluster interconnect switches; from there, you can use SSH to the node management on node 4.
  E. Connect to the node management on Node 3 and then use the HA interconnect to access node 4.
  A. You must use the Service Processor; node management LIFS do not fall over between nodes.

• Question 99:

  You install a new FAS26xx HA system with ONTAP 9.5 at a customer's site. After cabling the SAS cables, the customer wants to cable Alternate Control Path (ACP). But the FAS26xx has no physical port for ACP. Which statement is correct in this scenario?

  A. Within a FAS HA system, the ACP function is established over the cluster interconnect
  B. To reach the ACP function, you should put the ACP cable into one of the onboard Ethernet pons.
  C. The ACP function is established over the customer network.
  D. Beginning with ONTAP 9 software. ACP cabling for disk shelves is no longer required.
  D. Beginning with ONTAP 9 software. ACP cabling for disk shelves is no longer required.

• Question 100:

  You install and apply the NetApp RSCF on cluster interconnect switches. Which two statements are correct in this scenario? (Choose two.)

  A. The RCF file enables jumbo frames for all cluster traffic.
  B. The RCF file enables IPv6 for use by the cluster traffic.
  C. The RCF file enables flow control and is set to receive.
  D. The RCF file enables CDP to allow connected devices to discover the switch.
  A. The RCF file enables jumbo frames for all cluster traffic.
  B. The RCF file enables IPv6 for use by the cluster traffic.