Microsoft MB-335 Online Practice Questions and Exam Preparation

Microsoft MB-335 Online Questions & Answers

• Question 51:

  DRAG DROP

  A company uses the asset management module in Dynamics 365 Supply Chain Management.

  A machine on the shop floor is noisy and emitting and odd smell.

  The shop floor manager must alert the repair team that the asset might require a repair, or a series of repairs, by one or more specialized repair technicians. All repair records must tie back to the initial investigation records in case of a safety audit.

  You need to create components to initiate the process of tracking the requests.

  Which three actions should you perform in sequence? To answer. More the appropriate actions from the list of actions to the answer to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  
  

• Question 52:

  HOTSPOT

  A company uses Dynamics 365 Supply Chain Management.

  The company wants to use the distributed hybrid topology model to alleviate performance issues at some of its distribution centers. The company has a manufacturing plant, PlantA, which resides at the same physical location as the company home office in FranlFurt Germany.

  The company has the following distribution locations:

  1. Distribution1 covers Ireland.

  2. Distribute covers the United Kingdom.

  3. Distribution convers Belgium Germany, and the Netherlands

  4. Distribution5 covers the Shetland islands.

  All distribution warehouses use Dynamic 365 Supply Chain Management to receive and distribute goods from PlantA.

  Wherehouse personal use the warehouse app to perform their job function. Because of their proximity to each other, Distribution1, 2, and 3 are managed together and frequently transfer goods between each location.

  Due to several connection issues with Dynamic 365 Supply Chain Management, the Shettland islands location struggles to perform tasks.

  The company must maintain as little of its own IT infrastructure as possible, especially in remote areas, but still daily activities at all locations.

  You need to recommend the appropriate topology configuration.

  Which type of scaled should you use? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 53:

  A company produces generic and name-brand paper plates in the same factory using standard costing and unrig the same Bill of materials and routes to produce both product.

  The finance and production teams want a way to new individual raw material consumption costs in the ledger.

  You need to add a production group to tie finished good to control postings to the ledger.

  What should you do?

  A. Update the cost of the generic finished good item.
  B. Create a production pool tor the finished good item.
  C. Create a production group for the finished good item.
  D. Create a new Bill of materials with alternate cons for the raw material.
  C. Create a production group for the finished good item.

• Question 54:

  A company implements Dynamics 365 Supply Chain Management for their Lean manufacturing environment.

  There has been an engineering change to a fixed quantity product that is in production. This change will add an additional processing step as the second step. The existing version must be phased out and replaced by the new version.

  You need to ensure that the engineering change takes affect at the end of the month.

  Solution:

  1.) Edit the existing step number two activity to be the new engineering process

  2.) Edit the existing production flow. Set the expiration date due to the end of the month

  3.) Edit the existing Kanban rule. Set the expiration date to the end of the month

  4.) Activate the production flow

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  
  

• Question 55:

  DRAG DROP

  A manufacturing company is implementing Dynamics 365 Supply Chain Management.

  You have a bill of materials (BOM) for each finished good. Finished goods may have subcontracted operation steps.

  When a user views a BOM for a finished good, the finished good must be exploded automatically.

  You need to configure the BOM lines.

  What should you configure? To answer, drag the appropriate configurations to the correct requirements. Each configuration may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE: Each correct selection is worth one point.

  Select and Place:

  

  

  ---

  
  

• Question 56:

  HOTSPOT

  A manufacturing company uses Dynamics 365 Supply Cham Management.

  The company identifies a bill of materials (BOM) item that needs to be recalled for a product

  The engineering department needs to link customer support incidents and knowledgebase articles related to the product change.

  Other items affected by this change must reference the same support incidents and knowledgebase articles.

  You need to recommend features to facilitate this business process.

  Which features should you recommend? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 57:

  You need to set up the metal production route and BOM.

  Which three actions should you perform? Each correct answer presents part of the solution.

  NOTE: Each correct selection is worth one point.

  A. Set the operation route type as Standard.
  B. Set the input warehouse on the resource to the vendor warehouse.
  C. Set the operation route type as Vendor.
  D. Set all BOM lines warehouse to the production warehouse.
  E. Set all the BOM lines to resource consumption.
  B. Set the input warehouse on the resource to the vendor warehouse.
  C. Set the operation route type as Vendor.
  D. Set all BOM lines warehouse to the production warehouse.

• Question 58:

  A product is produced through lean manufacturing. The cleaning and inspection is performed by a contractor as an activity of a production flow.

  You need to assign the appropriate cost group type for the subcontracted work.

  Which cost group type should you use?

  A. Direct material
  B. Indirect
  C. Undefined
  D. Direct manufacturing
  E. Direct outsourcing
  E. Direct outsourcing

  ---

  Explanation

  In Microsoft Dynamics 365 Supply Chain Management, there are two approaches for subcontracting: production orders and lean manufacturing. In the lean manufacturing approach, the subcontracting work is modeled as a service that is related to an activity of a production flow. A special type of cost group type that is named Direct outsourcing has been introduced, and the subcontracting services are no longer part of a bill of materials (BOM). The cost accounting of subcontracted work is fully integrated into the costing solution for lean manufacturing.

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/activity-based-

  subcontracting

• Question 59:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  A company implements Dynamics 365 Supply Chain Management and configures the system to support process manufacturing.

  The company manufactures pain-relieving lotions. Several of the primary ingredients are delivered at different concentrations depending on the ingredient and vendor. Ingredient A is the primary active ingredient in the lotion. IngredientB is used as a compensating ingredient.

  You need to ensure that the system is set up to support the manufacturing process.

  Solution: Create a dimension-based product with configurations. Use a price model to calculate the different configurable option costs.

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  Explanation

  No, the solution does not meet the goal. A dimension-based product with configurations is used for discrete manufacturing, not process manufacturing. A price model is used to calculate the cost of different configurations of a product, not the cost of different concentrations of an ingredient. For process manufacturing, you need to use a formula-based product with batch attributes and potency management. A formula defines the materials, ingredients, and outcomes of a specific process. Batch attributes are used to capture the characteristics of a batch of products or ingredients. Potency management is used to adjust the quantity of an ingredient based on its concentration or strength1.

  1: Configure formulas for process manufacturing in Dynamics 365 Supply Chain Management - Training | Microsoft Learn

• Question 60:

  HOTSPOT

  A company produces high-end speaker systems and offers various configurations that allow customers to customize features such as finishes and speaker materials. You have set up a product configuration model with bill of material lines and conditions for each component.

  Customers can choose to add protective covers, but only if Metal is selected as the material. If any other material is chosen, the covers must not be available. You have added the following attributes:

  

  You need to create an expression-based constraint to ensure that Corner Protection can only be selected when Metal is the chosen material.

  How should you complete the expression? To answer, select the appropriate options in the answer area.