Microsoft MB-335 Online Practice Questions and Exam Preparation

Microsoft MB-335 Online Questions & Answers

• Question 71:

  A company uses Dynamics 365 Supply Chain Management.

  A piece of machinery that is critical to a production order breaks down during a production order.

  The completed quantities of the production order must be shipped.

  The remaining quantity on the production order needs to be completed once the machinery is fixed.

  Negative inventory is not allowed for the items.

  You need to resolve the production issue.

  What should you do?

  A. Ship the production quantity that is reported as nished.
  B. Cancel the production order and create a new order for the nished quantity.
  C. Split the current production order into two production orders.
  D. End the current production order and create a new order for the remaining quantity
  D. End the current production order and create a new order for the remaining quantity

  ---

  
  

• Question 72:

  Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen

  A client subcontracts production work to a vendor for production operations.

  You need to model subcontracting of route operations in production orders.

  Solution: Ensure that subcontracting of route operations supports back-flush costing.

  Does the solution meet the goal?

  A. Yes
  B. No
  B. No

  ---

  Explanation

  There are two methods for modeling subcontracting work for production operations. These methods differ in the way that the subcontracting process can be modeled, the way that semi-finished products are represented in the process, and the way that cost control is managed.

  * Subcontracting of route operations in production orders or batch orders.

  The service product must be a stocked product, and it must be part of the BOM. This method supports first in, first out (FIFO) or standard cost. Semi-finished products are represented by the service product in the process. Cost control allocates the costs that are associated with subcontracted work to the material costs.

  * Subcontracting of production flow activities in a lean production flow.

  The service is a non-stocked service product, and it isn't part of the BOM. This method uses purchase agreements as service agreements.

  This method uses backflush costing.

  This method allows for aggregated and asynchronous procurement. (Material flow is independent of the procurement process.)

  Cost control allocates subcontracted work in its own cost breakdown block.

  https://docs.microsoft.com/en-us/dynamics365/supply-chain/production-control/manage-subcontract-work-production

• Question 73:

  HOTSPOT

  You must configure the settings for the new limited-edition bicycle for the upcoming summer season.

  Which settings should you choose? To respond, select the appropriate options in the answer area.

  

  

• Question 74:

  You must ensure that the firepit product is available for sale.

  How should the product be released?

  A. Release the engineering product version and then assign the route.
  B. Connect the BOM to an engineering product version before release.
  C. Connect a route to an engineering version before release.
  D. Release the engineering product version and then assign BOM.
  B. Connect the BOM to an engineering product version before release.

• Question 75:

  DRAG DROP

  You are the product definition manager for a car manufacturing company. You set up and maintain the production configuration models used at the company.

  You must build a new configuration model and Include Constraints in the model.

  You need to determine winch constraint type to use tor each scenario.

  Which constraint type should you use?

  NOTE: Each correct selection is worth one point

  Select and Place:

  

  

• Question 76:

  A company configures master planning to order large and expensive aluminum sheets that are only available at specific times of the year. The warehouse manager reports that replenishment levels are too high, leading to inventory value exceeding the budget and causing storage space issues on the shop floor.

  You must configure the appropriate replenishment method.

  Which coverage dimension should you use?

  A. Per period
  B. Manual
  C. Min/Max
  D. Per requirement
  C. Min/Max

• Question 77:

  HOTSPOT

  A company implements Dynamics 365 Supply Chain Management. You must use functionality in the system for group production runs to prevent downtime and excessive cleaning of the machines on the production line.

  You need to set up the system.

  Which behaviors should you expect? To answer, select the appropriate options in the answer area.

  NOTE: Each correct selection is worth one point.

  

  

• Question 78:

  You need to enable the features and configuration keys for the firepits.

  Which two features should you enable? Each answer presents part of the solution.

  NOTE: Each correct selection is worth one point

  A. Engineering attributes
  B. Change management for process manufacturing
  C. Engineering product variants
  D. Engineering change management
  E. Production floor execution management
  A. Engineering attributes
  D. Engineering change management

• Question 79:

  DRAG DROP

  You are the production supervisor at a manufacturing company and are configuring the production control module and its parameters.

  The company plans to use manufacturing execution, and bill of materials (BOM) item consumption must be recorded when items are reported at the operation level.

  You need to configure the Manufacturing execution production order defaults form to enable backflushing at the operation level.

  How should you set up Automatic BOM consumption? To answer, drag the appropriate setting to the correct targets. Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  NOTE: Each correct selection is worth one point.

  Select and Place:

  

  

• Question 80:

  A manufacturer uses discreet orders and manually consumes raw material after reporting products as finished.

  You are performing an end-of-month closing for remaining picking lists on production orders.

  You must not be required to consume the full amount of material on production order picking lists as a result of improved production efficiency.

  When the production manager verifies that no material is left to consume, there are remaining back-ordered amounts.

  You need to pick the line item short and eliminate the remaining demand.

  What should you do?

  A. Enter the consumption amount on the line to match the actual amount used and select end on the production order picking list.
  B. Change the Coverage group on item option to manual.
  C. Delete the item from the Bill of materials for the nished good.
  D. Enter the consumption amount on the line to match the actual amount used, and delete the remaining amount.
  A. Enter the consumption amount on the line to match the actual amount used and select end on the production order picking list.

  ---