Microsoft 70-680 Online Practice Questions and Exam Preparation

Microsoft 70-680 Online Questions & Answers

• Question 191:

  You have a computer that runs Windows 7. The computer contains two volumes, C and D. You create a new folder called D:\Reports.

  You need to ensure that all files stored in the Reports folder are indexed by Windows Search. What should you do?

  A. Enable the archive attribute on the folder.
  B. Modify the Folder Options from Control Panel.
  C. Modify the properties of the Windows Search service.
  D. Create a new library and add the Reports folder to the library.
  D. Create a new library and add the Reports folder to the library.

  ---

  Libraries enable you to organize files by using metadata about the file, such as author, date, type, tags, and so on-instantly. You're not limited to just browsing files by folder hierarchy. When you save files in a Library, Windows?7 indexes the files. You can use Library features like the Arrange By control to instantly browse the files in the Library by metadata or use the Search Builder, which is built into the Search box in Windows Explorer, to instantly search the files in the Library by metadata.

• Question 192:

  You have a computer that runs Windows 7. The computer has a single volume. You install 15 applications and customize the environment.

  You complete the following actions:

  

  Create an export by using Windows

  

  Create a system image by using

  

  Install the User State Migration Tool

  The disk on the computer fails. You replace the disk.

  You need to restore the environment to the previous state.

  What should you do?

  A. Install Windows 7, install USMT, and then run Loadstate.
  B. Install Windows 7 and then import the Windows Easy Transfer package.
  C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run Bcdboot.exe.
  D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the system image.
  D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the system image.

  ---

  Restoring from a System Image Backup A System Image restore rewrites the entire contents of a system volume. Therefore, you restore from a System Image backup by booting from the Windows 7 Installation DVD-ROM and loading System Recovery tools or by pressing F8 during the boot process. Restoring from a System Image backup enables you to quickly get a computer running after you replace a failed hard disk, or if the operating system installation has been corrupted (for example, by malware that cannot be removed except 0 by wiping the disk). It is sometimes known as complete recovery or complete PC Restore. This procedure assumes that the System Recovery Options (otherwise known as the Windows Recovery Environment, or Windows RE) files are present on the DVD-ROM. If not, you can boot from the installation DVD-ROM and press F8 during the boot to access the Advanced Boot Options, as described in the next section of this lesson. To restore a System Image backup, perform the following steps:

  1.

  Ensure the backup medium is connected to your computer.

  2.

  Insert the Windows 7 DVD-ROM. Ensure that the computer BIOS is configured to boot from the DVD-ROM.

  3.

  Restart your computer. When prompted to boot from DVD-ROM, press any key.

  4.

  Windows 7 Setup loads. When prompted, select your regional preferences and then click Next.

  5.

  Click Repair Your Computer.

  6.

  In the System Recovery Options dialog box, click Restore Your Computer Using System Image. If the

  backup was saved to a DVD-ROM, insert the DVD-ROM now. Click Next. The Windows System Image Restore Wizard starts.

  7.

  On the Select A System Image Backup page, the most recent backup is automatically selected. If this is the backup you want to restore, click Next. Otherwise, click Select A System Image, click Next, and then select the desired backup.

  8.

  On the Choose Additional Restore Options page, select the Format And Repartition Disks check box if you want to reformat the disk and overwrite all data, or if the disk is not formatted. If you do not want to overwrite all the data on your

  current disk, do not select this check box.

  Click Next.

  9.

  Click Finish. When prompted, click Yes to confirm. Windows System Image Restore reads the data from the backup and overwrites existing files. You can restore to a different-sized hard disk, provided that the hard disk is large enough to

  store the backup. After the restore is complete, the computer restarts using the restored system volume.

• Question 193:

  A company has client computers that run Windows XP. The company plans to upgrade all the client computers to Windows 7. Each employee will keep the same computer.

  You need to upgrade the client computers from Windows XP to Windows 7 while maintaining each user's files and settings.

  Which actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

  Select and Place:

  

  

• Question 194:

  You have a computer that runs Windows 7.

  You need to prevent Internet Explorer from saving any data during a browsing session.

  What should you do?

  A. Disable the BranchCache service.
  B. Modify the InPrivate Blocking list.
  C. Open an InPrivate Browsing session.
  D. Modify the security settings for the Internet zone.
  C. Open an InPrivate Browsing session.

  ---

  InPrivate Mode consists of two technologies: InPrivate Filtering and InPrivate Browsing. Both InPrivate Filtering and InPrivate Browsing are privacy technologies that restrict the amount of information available about a user's browsing session. InPrivate Browsing restricts what data is recorded by the browser, and InPrivate Filtering is used to restrict what information about a browsing session can be tracked by external third parties.

• Question 195:

  You have a computer that runs a 32-bit version of Windows 7 Home Premium. The computer has a single partition on a single hard disk drive.

  You want to test a 64-bit version of Windows 7 Ultimate. You configure the computer for a dual boot with previously installed Windows 7 Home Premium.

  You need to configure the computer to support the dual boot.

  What should you do?

  A. Start Windows 7 Home Premium. Create a Virtual Hard Disk (VHD) file to start Windows 7 Ultimate.
  B. Start Windows 7 Home Premium. Add a new entry to the boot menu.
  C. Attach Windows 7 Ultimate media as an ISO image into Windows 7 Home Premium.
  D. Install Virtual PC into Windows 7 Home Premium.
  A. Start Windows 7 Home Premium. Create a Virtual Hard Disk (VHD) file to start Windows 7 Ultimate.

• Question 196:

  A user in your company wants to upgrade a Windows Vista Business computer to Windows 7. You need to upgrade the computer to the minimum Windows 7 edition that meets the following requirements:

  

  BitLockerTo Go

  

  DirectAccess

  Which Windows 7 edition should you choose?

  A. Windows 7 Home Premium
  B. Windows 7 Professional
  C. Windows 7 Home Basic
  D. Windows 7 Ultimate
  D. Windows 7 Ultimate

• Question 197:

  You have a computer that runs Windows 7. The computer is a member of a domain. You share D:\data as Data. You assign Everyone Full control share permissions to the folder. No other share permissions are assigned to the folder.

  From another computer, you attempt to create a file in the Data share by using a domain account named User1. You receive the following error message: "Destination Folder Access Denied".

  You need to ensure that you can create files in the Data share by using the User1 account.

  What should you do?

  A. Create a local user named User1.
  B. Add User1 to the local Power Users group.
  C. Assign User1 Write NTFS permission on the D:\data folder.
  D. Assign User1 Full control share permissions to the Data share.
  C. Assign User1 Write NTFS permission on the D:\data folder.

  ---

  Share permissions apply to users who connect to a shared folder over the network. Share permissions do not affect users who log on locally, or log on using Remote Desktop. To set permissions for users who log on locally or using Remote Desktop, use the options on the Security tab instead of the Share Permissions tab. This sets permissions at the NTFS file system level. If both share permissions and file system permissions are set for a shared folder, the more restrictive permissions apply when connecting to the shared folder. For example, to give Read access on a shared folder to users in your domain, on the Share Permissions tab, set permissions for the Everyone group to Full Control. On the Security tab, specify more restrictive access by setting the permissions for the Domain Users group to Read access. The result is that a user who is a member of the Domain Users group has read-only access to the shared folder whether the user is connected through a network share, through Remote Desktop, or is logged on locally.

  Permissions The Read permission allows a user or group to access a file or folder but does not allow modification or deletion. The Change permission includes the read permission but also allows you to add files, delete files, and modify files in the shared folder. This permission is equivalent to the Read/Write permission in the basic File Sharing dialog box. The Full Control permission includes all the rights conferred by the Change and Read permissions. It also allows the user assigned that permission to modify the permissions of other users. Full Control is equivalent to the basic sharing Owner permission, though unlike basic sharing, where there can only be one user assigned the Owner permission, you can assign the Full Control permission to users and groups.

  NTFS permissions You can configure the local NTFS permissions for a shared folder or volume using Share and Storage Management in the following ways: New shared resources. In the Provision a Shared Folder Wizard, before you select a network sharing protocol, you can change the NTFS permissions for the folder or volume you will be sharing. These NTFS permissions will apply both locally and when accessing the resource over the network. To change the NTFS permissions, on the NTFS Permissions page, select Yes, change NTFS permissions, and then click Edit Permissions. Existing shared resources. You can change the NTFS permissions of a shared folder or volume listed on the Shares tab. To change the NTFS permissions, select the folder or volume, in the Actions pane click Properties, and on the Permissions tab, click NTFS Permissions.

• Question 198:

  You have a virtual hard disk (VHD) file. You need to view the files in the VHD. The solution must prevent users that log on to your computer from modifying files in the VHD. What should you do?

  A. From Disk Management, attach the VHD as read-only.
  B. From Disk Management, convert the VHD to a GPT disk.
  C. From Windows Explorer, modify the permissions of the VHD file.
  D. From Windows Explorer, modify the read-only attribute of the VHD file.
  A. From Disk Management, attach the VHD as read-only.

• Question 199:

  You deploy a custom image to a computer and discover that the Telnet Client feature is disabled. You need to ensure that the Telnet Client feature is enabled when you deploy the image.

  You must achieve this goal in the minimum amount of time.

  What should you do?

  A. Enable the Telnet Client feature on the computer. Generalize the computer and capture the image.
  B. Create an unattended file that enables Telnet Client. Generalize the computer and specify the unattended file. Capture the image.
  C. Mount the image. Run Ocsetup.exe TelnetClient. Commit the changes and unmount the image.
  D. Mount the image. Run Dism.exe and specify /image and /enable-feature:TelnetClient switches. Commit the changes and unmount the image.
  D. Mount the image. Run Dism.exe and specify /image and /enable-feature:TelnetClient switches. Commit the changes and unmount the image.

  ---

  NOTE: "when you deploy the image." Implies for future installations, not the current one.

  Therefore the imagefile must be updated.

  Dism Deployment Image Servicing and Management (DISM) is a command-line tool used to service Windows?images offline before deployment. You can use it to install, uninstall, configure, and update Windows features, packages, drivers,

  and international settings. Subsets of the DISM servicing commands are also available for servicing a running operating system. Windows 7 introduces the DISM command-line tool. You can use DISM to service a Windows image or to

  prepare a Windows PE image. DISM replaces Package Manager (Pkgmgr.exe), PEimg, and Intlcfg in Windows Vista, and includes new features to improve the experience for offline servicing. You can use DISM to perform the following

  actions:

  -Prepare a Windows PE image.

  -Enable or disable Windows features within an image.

  -Upgrade a Windows image to a different edition.

  -

  Add, remove, and enumerate packages.

  -

  Add, remove, and enumerate drivers.

  - Apply changes based on the offline servicing section of an unattended answer file.

  -Configure international settings.

  -Implement powerful logging features.

  -

  Service operating systems such as Windows Vista with SP1 and Windows Server 2008.

  -

  Service a 32-bit image from a 64-bit host and service a 64-bit image from a 32-bit host.

  -Service all platforms (32-bit, 64-bit, and Itanium).

  -Use existing Package Manager scripts.

• Question 200:

  You have a computer that runs Windows 7.

  You install Internet Information Services (IIS) to test a web based application. You create a local group named Group1. You need to ensure that only the members of Group1 can access the default Web site.

  Which two configuration changes should you perform? (Each correct answer presents part of the solution, Choose two.)

  A. Modify the properties of Group1.
  B. Assign an SSL certificate to the default Web site.
  C. Modify the authentication methods of the default Web site.
  D. Modify the NTFS permissions of the %systemroot%\inetpub\wwwroot folder
  C. Modify the authentication methods of the default Web site.
  D. Modify the NTFS permissions of the %systemroot%\inetpub\wwwroot folder

  ---

  Modifying the Default Authentication Method

  You can use the Directory Security tab of the Web Site Properties dialog box to change the authentication method. The authentication method determines whether users are identified, and how users must be identified to access your site. The

  authentication method you select varies, depending on the kind of site you are creating and the purpose of the site.

  Modify the NTFS permissions of the %systemroot%\inetpub\wwwroot folder

  See article:

  How to set required NTFS permissions and user rights for an IIS 5.0, IIS 5.1, or IIS 6.0 Web server http://support.microsoft.com/kb/271071 Trust me ;)