Microsoft 70-643 Online Practice Questions and Exam Preparation

Microsoft 70-643 Online Questions & Answers

• Question 391:

  Your network contains an Active Directory domain named fabrikam.com

  The domain contains a Web server named Web1 that runs Windows Server 2008 R2.

  You install the FTP Server role service on Web1.

  You need to manage the FTP server settings on Web1.

  Which tool should you use?

  A. Services
  B. Internet Information Services (IIS) Manager
  C. Internet Information Services (IIS) 6.0 Manager
  D. Ftp
  C. Internet Information Services (IIS) 6.0 Manager

• Question 392:

  Your network contains three servers. The servers are configured as shown in the following table.

  

  All client computers run the 32-bit version of Windows 7.

  You have a 64-bit application named Appl. App1 is associated with the .kfa file extension. You need to ensure that when users open files that have the .kfa file extension, App1 automatically opens.

  What should you do?

  To answer, move the appropriate actions from the Possible Actions list to the Necessary Actions area and arrange them in the correct order.

  Select and Place:

  

  

• Question 393:

  Your company has a single Active Directory domain named contoso.com. All servers in the domain run Windows Server 2008 R2.

  The DNS Server server role is installed on two domain controllers named DC1 and DC2. Both DNS servers host Active Directory-integrated zones that are configured to allow the most secure updates only.

  DC1 has Key Management Service (KMS) installed and activated. You discover that the service locator records from the contoso.com zone hosted on DC1 and DC2 are missing.

  You need to force registration of the KMS service locator records in the contoso.com zone.

  What should you do?

  A. Configure the contoso.com zone to accept non-secure updates.
  B. On DC1 at the command prompt, run the slmgr.vbs rearm script.
  C. On DC1 at the command prompt, run the net stop slsvc command, and then run the net start slsvc command.
  D. On DC2 at the command prompt, run the net stop netlogon command, and then run the net start netlogon command.
  C. On DC1 at the command prompt, run the net stop slsvc command, and then run the net start slsvc command.

  ---

  A KMS host will automatically update its SRV entries if the software licensing service (slsvc.exe) detects that the computer name or TCP port has changed during service startup. It will also update them once each day, in order to ensure that they are not automatically removed (scavenged) by the DNS system. Source: http://download.microsoft.com/download/c/3/8/c3815ed7-aee7-4435-802b8e855d549154/VolumeActivation2.0Step-By-StepGuide.doc

• Question 394:

  You have the Web Server (IIS) role installed on a server that runs Windows Server 2008.

  You make changes to the configuration of an application named APP1. Users report that the application fails. You examine the event log and discover the following error message:

  You need to ensure that users are able to connect to APP1.

  Which command should you run at the command prompt on the server?

  A. appcmd set config
  B. appcmd stop apppool
  C. appcmd start apppool
  D. appcmd set apppool
  C. appcmd start apppool

  ---

  To ensure that users are able to connect to App1, you need to run appcmd start apppool on the server.

  The "503 Service Unavailable" error mostly occurs whenever HTTP.SYS, the kernel HTTP driver that manages http connections for IIS, fails to create an IIS worker process to process the request. This failure is typically caused by a critical error during worker process initialization, or more likely an unhandled exception / access violation occurring during worker process startup. After a certain number of failures, the application pool will trigger Rapid Fail Protection, a WAS feature designed to stop application pools with a persistent failure condition to avoid an endless loop of failing to start worker processes. At this

  point, all requests to applications within the stopped application pool will result in the 503 error, and the application pool will need to be re-started manually Reference: Troubleshooting IIS7 503 "Service unavailable" errors with startup debugging http://mvolo.com/blogs/serverside/archive/2007/05/19/Troubleshooting-IIS7-503-_2200_Service- unavailable_2200_-errors-with-startup-debugging.aspx

• Question 395:

  Your network contains a server that has the Remote Desktop Session Host (RD Session Host) role service installed.

  You need to ensure that the Remote Desktop sessions of administrators are more responsive than other sessions when the server is under a heavy load.

  What should you do?

  A. From the RDP-Tcp properties, modify the Client Settings.
  B. From the RDP-Tcp properties, modify the Sessions settings.
  C. Install and configure the RD Session Broker role service.
  D. Install and configure Windows System Resource Manager (WSRM).
  D. Install and configure Windows System Resource Manager (WSRM).

• Question 396:

  Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1).

  Server1 has a RAID5 volume.

  One of the disks in the RAID5 volume fails.

  You install a new disk on Server1.

  You need to add the new disk to the RAID-5 volume.

  Which Diskpart command should you run?

  A. active
  B. add
  C. assign
  D. attach vdisk
  E. attributes
  F. automount
  G. break
  H. repair
  I. compact vdisk
  J. retain
  H. repair

  ---

  Repairs the RAID-5 volume with focus by replacing the failed disk region with the specified dynamic disk

  repair disk= [align=] [noerr] disk region in the RAID-5 volume.

  A volume in a RAID-5 array must be selected for this operation to succeed. Use the select volume command to select a volume and shift the focus to it.

  http://technet.microsoft.com/en-us/library/cc731358(v=ws.10)

• Question 397:

  Your network contains two servers named Server1 and Server2. Server1 and Server2 run Windows Server 2008 R2 Enterprise and have the Hyper-V server role installed.

  You need to deploy a Hyper-V host cluster. The solution must ensure that if one of the hosts is disconnected from the shared storage device, all of the virtual machines (VMs) running on the host will continue to run.

  What should you do?

  To answer, move the appropriate actions from the Possible Actions list to the Necessary Actions area and arrange them in the correct order.

  Select and Place:

  

  

• Question 398:

  You have four Remote Desktop Session Host Servers that run Windows Server 2008 R2. The Remote Desktop Session Host Servers are named Server1, Server2, Server3, and Server4.

  You install the Remote Desktop Connection Broker role service on Server1.

  You need to configure load balancing for the four Remote Desktop Session Host Servers. You must ensure that Server2 is the preferred server for Remote Desktop Services sessions.

  Which tool should you use?

  A. Group Policy Management
  B. Remote Desktop Session Host Configuration
  C. Remote Desktop Connection Manager
  D. RD Gateway Manager
  B. Remote Desktop Session Host Configuration

  ---

  You can configure a Remote Desktop Session Host (RD Session Host) server to join a farm in RD Connection Broker, and to participate in RD Connection Broker Load Balancing, by using the Remote Desktop Session Host Configuration tool.

  To configure RD Connection Broker settings

  1.

  On the RD Session Host server, open Remote Desktop Session Host Configuration. To open Remote Desktop Session Host Configuration, click Start, point to Administrative Tools, point to Remote Desktop Services, and then click Remote Desktop Session Host Configuration .

  2.

  In the Edit settings area, under RD Connection Broker, double-click Member of farm in RD Connection Broker.

  3.

  On the RD Connection Broker tab of the Properties dialog box, click Change Settings.

  4.

  In the RD Connection Broker Settings dialog box, click Farm member.

  5.

  In the RD Connection Broker server name box, type the name of the RD Connection Broker server.

  6.

  In the Farm name box, type the name of the farm that you want to join in RD Connection Broker.

  7.

  Click OK to close the RD Connection Broker Settings dialog box.

  8.

  To participate in RD Connection Broker Load Balancing, select the Participate in Connection Broker Load-Balancing check box.

  9.

  Optionally, in the Relative weight of this server in the farm box, modify the server weight. By default, the value is 100. The server weight is relative. Therefore, if you assign one server a value of 50, and one a value of 100, the server with a weight of 50 will receive half the number of sessions.

  10.

  Verify that you want to use IP address redirection. By default, the Use IP address redirection setting is enabled. If you want to use token redirection mode, select Use token redirection. For more information, see About IP Address and Token Redirection.

  11.

  In the Select IP addresses to be used for reconnection box, select the check box next to each IP address that you want to use.

  12.

  When you are finished, click OK. Source: http://technet.microsoft.com/en-us/library/cc771383.aspx

• Question 399:

  You manage a server named Server2 that runs Windows Server 2008 R2. You install and test the Remote Desktop Services server role on Server2. You publish an application by using Remote Desktop Services. All users must connect to the Remote Desktop Services application by using the Remote Desktop Protocol. You install and configure the RD Gateway role service on Server2. You configure a default domain policy to enable the Enable Connection through RD Gateway setting. Users report that they cannot connect to the Remote Desktop Services application. You need to ensure that users can access the Remote Desktop Services application on the intranet and from the Internet.

  What should you do?

  A. Configure the Enable Connection through RD Gateway Group Policy setting to Disabled.
  B. Configure the Set RD Gateway server address Group Policy and configure the IP address of the RD Gateway server. Link the Group Policy object (GPO) to the domain.
  C. Configure Server Authentication on the Remote Desktop Connection client to Always connect, even if server authentication fails for all users.
  D. Enable the Set RD Gateway server authentication method Group Policy to the Ask for credential, use NTLM protocol setting. Link the Group Policy object (GPO) to the domain.
  B. Configure the Set RD Gateway server address Group Policy and configure the IP address of the RD Gateway server. Link the Group Policy object (GPO) to the domain.

  ---

  How to use the Group Policy Management Console (GPMC) to enable connections through RD Gateway. When this policy setting is enabled, when Remote Desktop Services clients cannot connect directly to an internal network resource (computer), the clients will attempt to connect to the computer through the RD Gateway server that is specified in the Set RD Gateway server address policy setting.

  Source: http://technet.microsoft.com/en-us/library/cc726011.aspx

• Question 400:

  Your network contains an SMTP server that runs Windows Server 2008 R2.

  You need to ensure that all mail for contoso.com is routed through a smart host named mail.contoso.com. All other mail must be routed by using DNS name resolution.

  What should you configure?

  A. a new SMTP domain
  B. the Advanced delivery options
  C. the Messages options
  D. the Outbound connections options
  A. a new SMTP domain