Microsoft 70-643 Online Practice Questions and Exam Preparation

Microsoft 70-643 Online Questions & Answers

• Question 301:

  Your network contains a server that has Microsoft SharePoint Foundation 2010 installed. Users report that it takes as many as five minutes to receive an email notification when content on the SharePoint site is changed.

  You need to reduce the amount of time it take for users to receive the email notifications.

  What should you modify?

  A. the incoming email settings
  B. the outgoing email settings
  C. the Task Scheduler Library
  D. the timer job definitions
  D. the timer job definitions

  ---

  Timer job reference (SharePoint Foundation 2010)

  This article describes the default timer jobs for SharePoint Foundation 2010. A timer job runs in a specific Windows service for SharePoint Foundation. Timer jobs also perform infrastructure tasks for the Timer service, such as clearing the

  timer job history and recycling the Timer service; and tasks for Web applications, such as sending email alerts. A timer job contains a definition of the service to run and specifies how frequently the service is started. The SharePoint 2010

  Timer service (SPTimerv4) runs timer jobs. Many features in SharePoint Foundation rely on timer jobs to run services according to a schedule.

  Manage timer jobs

  You can check the status of a timer job and edit the timer job definition. For the general administration of all jobs, the SharePoint Central Administration Web site as a Timer Job Status page and a Job Definitions page. You can find these

  pages in Central Administration, on the Monitoring page, in the Timer Jobs section.

  From the View menu, you can filter the timer jobs at the following levels:

  All Displays all timer jobs for the farm.

  Service Displays all the timer jobs for a particular service. If you select this command, use the Service menu to select the service by which you want to filter the listed jobs.

  Web Application Displays all the timer jobs for a Web application. If you select this option, use the Web Application menu to select the Web application by which you want to filter the listed jobs.

  Server Displays all the timer jobs for the specified server. If you select this command, use the Server menu to select the server by which you want to filter the listed jobs.

  Job Definition Displays all the timer jobs for the specified job definition. On the Timer Job Status page, use the Job Definition menu to select the job definition by which you want to filter the listed jobs.

  Failed Jobs Displays all the timer jobs on the farm that have failed to finish.

  The SharePoint 2010 Timer service (SPTimerv4) is based on the Gregorian calendar for scheduling.

  For every job that you schedule, you specify when the timer job will run, specified in a 24-hour time format. You must specify the time in local time instead of as an offset from Coordinated Universal Time (UTC). The time is stored in that

  format. Daily, weekly, and monthly schedules also include a window of execution. The timer service will select a random time within this interval to start executing the job on each applicable server. This feature is appropriate for high-load jobs

  that run on multiple servers on the farm. Running this kind of job on all the servers at the same time might place an unreasonable load on the farm. Timer job schedules can be specified by using Windows PowerShell.

  Default timer jobs

  The following table lists the default timer jobs for SharePoint Foundation 2010.

  Immediate Alerts Sends out immediate and scheduled alerts.

  Source: http://technet.microsoft.com/en-us/library/ff808317.aspx

• Question 302:

  Your network contains a server that runs Windows Server 2008 R2 and has the Windows Deployment Services (WDS) server role installed. You have a .vhd file that contains an installation of Windows 7. You need to deploy the Windows 7 installation by using WDS. You want to achieve this goal by using the minimum amount of administrative effort.

  What should you do first?

  A. From Disk Management, mount the .vhd file.
  B. From Windows Deployment Services, add a capture image.
  C. Run the imagex.exe command and specify the /export parameter.
  D. Run the wdsutil.exe command and specify the /add-image parameter.
  D. Run the wdsutil.exe command and specify the /add-image parameter.

  ---

  To add a virtual hard disk image to the server

  1.

  Click Start, right-click Command Prompt, and then click Run as administrator.

  2.

  You must create an image group because .vhd images cannot be in image groups with .wim images. To create an image group for the .vhd image, use the following syntax: WDSUTIL /Add- ImageGroup /ImageGroup:

  .

  Example: WDSUTIL /Add-ImageGroup /ImageGroup:"VHD Image Group"

  3.

  To add the .vhd image to the server, use the following syntax (at a minimum): WDSUTIL /Verbose /Progress /Add-Image /ImageFile: /ImageType:Install /ImageGroup:. For differencing disks, the path to the

  image should be to the .vhd file of the differencing disk and not to the parent disk. Adding the differencing .vhd will add the parent .vhd file to the server, but only the differencing disk will be active (the parent .vhd will be inactive). If the

  differencing disk is part of chain, choose the last .vhd in the chain. In that case, the immediate parent .vhd and all preceding parent .vhd files in the chain will also be added. Full syntax: WDSUTIL /add-Image /ImageFile:<.vhd file path> [/

  Server:] /ImageType:install [/ImageGroup:] [/Filename:] [/UnattendFile:]

  Example: WDSUTIL /Verbose /Progress /Add-Image /ImageFile:"C:\vhd \WindowsServer2008R2.vhd" /Server:MyWDSServer /ImageType:Install /ImageGroup:"VHD Image Group"

  4.

  Repeat step 3 until you have added all of your .vhd images.

  5.

  If you want to update the description for an image, use the following steps:

  a. Run WDSUTIL /Get-ImageGroup /ImageGroup: and note the name that the server assigned to the image. To display the full image metadata on each image in the group, append /Detailed.

  Example: WDSUTIL /Get-ImageGroup /ImageGroup:"VHD Image Group" b. To update the description for an image, use the following syntax where is the name you noted in the previous step: WDSUTIL /Set-Image /

  Image: /ImageType:Install /ImageGroup: /Description:.

  Example: WDSUTIL /Set-Image /Image:"VHD image" /ImageType:Install /ImageGroup:"VHD Image Group" /

  Description:"VHD image for R2"

  Source: http://technet.microsoft.com/en-us/library/dd363560(WS.10).aspx

• Question 303:

  Your network contains an enterprise certification authority (CA). You have a server named Server1 that has the Web Server (IIS) server role installed. Server1 has a website named Site1.

  Users access the website by using the following URLs: -https://web -https://sitel.contoso.com

  The users report that they receive the error message shown in the exhibit. (Click the Exhibit button.)

  

  You need to request a Subject Alternative Name (SAN) certificate for Server1. Which tool should you use?

  A. Internet Information Services (IIS) 6.0 Manager
  B. Local Security Policy
  C. Certificates
  D. Internet Information Services (IIS) Manager
  E. Certification Authority
  C. Certificates

  ---

  Ref: http://technet.microsoft.com/library/ff625722.aspx

• Question 304:

  Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the Windows Deployment Services (WDS) server role installed.

  You have a client computer named Client1 that does not support the Pre-boot Execution Environment (PXE).

  You need to ensure that Client1 can connect to Server1 to download an image.

  Which type of image should you use?

  A. boot
  B. capture
  C. discover
  D. install
  C. discover

  ---

  Boot images. Boot images are images that you boot a client computer into to perform an operating system installation. In most scenarios, you can use the Boot.wim from the installation DVD (in the \Sources directory). The Boot.wim contains Windows PE and the Windows Deployment Services client (which is basically Windows Vista Setup.exe and supporting files).

  Install images. Install images are the operating system images that you deploy to the client computer. You can also use the install.wim from the installation DVD, or you can create your own install image.

  Capture images. Capture images are boot images that you boot a client computer into in order to capture the operating system into a .wim file. You can also create media (CD, DVD, USB drive, and so on) that contains a capture image, and then boot a computer from the media. These images provide an alternative to the command-line utility, ImageX.exe. Except in advanced scenarios, you can create a capture image using the Boot.wim file from the Windows Vista media (located in the \Sources folder). You can also use the WinPE.wim from the Windows AIK to create a capture image, which is slightly smaller than the Boot.wim.

  Discover images. If you have a computer that is not PXE enabled, you can create a discover image and use it to install an operating system on that computer. When you create a discover image and save it to media (CD, DVD, USB drive, and so on), you can then boot a computer to the media. The discover image on the media locates a Windows Deployment Services server, and the server deploys the install image to the computer. You can configure discover images to target a specific Windows Deployment Services server. This means that if you have multiple servers in your environment, you can create a discover image for each, and then name them based on the name of the server.

  Source: http://technet.microsoft.com/en-us/library/cc766320(WS.10).aspx

• Question 305:

  You plan to stream media content over the Internet.

  You need to configure PlayReady DRM to support HTTP streaming.

  What should you install?

  A. Microsoft IIS Media Services
  B. Microsoft Office Communications Server
  C. Microsoft SharePoint Foundation 2010
  D. Streaming Media Services
  A. Microsoft IIS Media Services

  ---

  IIS Media Services to Include a Version of PlayReady DRM for HTTP Streaming Some big news today for customers who are interested in easy to use, robust content protection for HTTP streaming scenarios using IIS Media Services...

  Today we're announcing that IIS Media Services will support a version of PlayReady DRM to enable protected HTTP streaming. The PlayReady DRM IIS Media Services solution will deploy on a single box to secure your media assets for

  online streaming using the IIS Smooth Streaming and PlayReady DRM technology, directly within IIS Media Services - no additional license fees or royalties required.

  File-based encryption is the most robust way to secure high value content much more so than stream encryption, which only secures the communication stream.

  The PlayReady DRM IIS Media Services solution will bring full file-based encryption into IIS Media Services with the ease of use of traditional stream encryption.

  And the solution of course will use Microsoft PlayReady technology, which is widely supported in the industry and draws on the experience gained from more than a decade of investment that Microsoft has made in the development of DRM

  technology. For customers needing to apply PlayReady DRM protection to content for offline scenarios, or apply customized business rules to the use of protected content in purchase/rental/subscription scenarios, of course that functionality

  will remain available, as it is today, via the use of a PlayReady Server.

  Source: http://team.silverlight.net/announcement/iis-media-services-to-include-a-version-of- playready-drm-for-http-streaming/

• Question 306:

  Your network contains an Active Directory domain. The domain contains a member server named Server1.

  You install the Windows Deployment Services (WDS) server role on Server1. You have a reference computer named Computer1 that runs Windows 7.

  You need to capture an image of Computer1 to WDS.

  What should you do?

  To answer, move the appropriate actions from the Possible Actions list to the Necessary Actions area and arrange them in the correct order.

  Select and Place:

  

  

• Question 307:

  Your network contains a Web server named Server1 that runs Windows Server 2008 R2.

  You need to ensure that Server1 only processes HTTP URLs that are shorter than 2,048 bytes.

  Which feature should you configure from Internet Information Services (IIS) Manager?

  A. HTTP Response Headers
  B. IP Address and Domain Restrictions
  C. Default Document
  D. SSL Settings
  E. Worker Processes
  F. Authentication
  G. Connection Strings
  H. IIS Manager Permissions
  I. Request Filtering
  J. ISAPI and CGI Restrictions
  I. Request Filtering

  ---

  Ref: http://www.iis.net/ConfigReference/system.webServer/security/requestFiltering

• Question 308:

  Your network contains a server named WMS1 that has the Streaming Media Services server role installed. You have a publishing point as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that you can modify the content source for the publishing point. What should you do?

  A. Configure stream splitting.
  B. Disconnect all of the connections to the publishing point.
  C. Stop Windows Media Services.
  D. Stop the publishing point.
  D. Stop the publishing point.

• Question 309:

  You manage a member server that runs Windows Server 2008 R2. The server has the Web Server (IIS) role installed.

  The Web server hosts a Web site named Intranet1. Only internal Active Directory user accounts have access to the Web site.

  The authentication settings for Intranet1 are configured as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that users authenticate to the Web site by using only the Microsoft Challenge Handshake Authentication Protocol version 2 (MS-CHAPv2) encrypted Active Directory credentials. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  A. Add the Digest Authentication role service and the URL Authorization role service to the server.
  B. Add the Windows Authentication role service to IIS. Configure the Windows Authentication setting to Enabled in the Intranet1 properties.
  C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.
  D. Configure the Default domain field for the Basic Authentication settings on Intranet1 by adding the name of the Active Directory domain.
  E. Configure the Basic Authentication setting to Disabled and the Anonymous Authentication setting to Enabled in the Intranet1 properties.
  B. Add the Windows Authentication role service to IIS. Configure the Windows Authentication setting to Enabled in the Intranet1 properties.
  C. Configure the Basic Authentication setting to Disabled in the Intranet1 properties.

  ---

  To ensure that the users accessing the website are authenticated through MS-CHAPv2 encrypted Active Directory credentials, you should Add Windows Authentication role service to the IIS server. Enable the Windows Authentication settings in the intranet-e properties and disable the basic authentication setting in the intranet-e properties. Basic authentication is a set of basic rules that authenticate users. To implement MS-CHAPv2, you have to disable the basic authentication and then, add windows authentication role services to the IIS server. After adding it, you should enable it. The Windows Authentication role service will allow the website to be authenticated through MS- CHAPv2.

• Question 310:

  Your network contains a server named Web1 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Web1 has the Web Server (IIS) server role installed.

  You configure the Default Web Site to use a self-signed certificate.

  You have a client computer named Computer1 that runs Windows 7.

  You need to ensure that when you connect to the Default Web Site by using Computer1, you do not receive a certificate error.

  What should you do?

  A. On Computer1, add a certificate to the Trusted Publishers store.
  B. On Computer1, add a certificate to the Trusted Root Certification Authorities store.
  C. On Server1, modify the SSL Settings of the Default web Site.
  D. On Server1, modify the Authentication settings of the Default Web Site.
  B. On Computer1, add a certificate to the Trusted Root Certification Authorities store.

  ---

  In order for RPC over Http to work you must have a Trusted CA Root Certificate installed and configured. In a situation where you are using a self-signed cert you will need to install the certificate into the Trusted Root Certification Authorities store.

  1. Connect to your OWA site by going to https://host.domainname.com/exchange

  

  You should see a screen like the above due to the fact that your self-signed cert is not trusted.

  2. Choose "Continue to this website (not recommended)".

  

  You should then be presented with your OWA logon page.

  3. Click on "Certificate Error" beside the address bar and select view certificates.

  

  If you do not see the Install Certificate option close IE7 and then right click on IE7 and choose run as administrator and load the page again.

  4.

  Once you have the install certificate button available, select "Install Certificate".

  5.

  This will launch the Certificate Import Wizard. Make sure to Choose the option "Place all certificates in the following store" and select browse.

  

  6. Select Trusted Root Certification Authorities and click Ok.

  

  * In some cases you have to check show physical stores, then select "Local Computer" under Trusted Root Certification Authorities.

  

  7.

  Click Finish on Completing the Certificate Import Wizard

  8.

  Click yes on the security warning to install the certificate

  9.

  If you want to verify the Certificate has been installed you can load the certificates snap in and you should see it under Certificates current User-Trusted Root Certification Authorities-Certificates.

  

  

  

  Note: You can also copy it to the local computers certificate store so it applies for all users that use the machine. If you install the certificate but then cannot see it please read the following KB article:

  http://support.microsoft.com/default.aspx?scid=kb;EN-US;932156 http://blogs.technet.com/b/sbs/archive/2007/04/10/installing-a-self-signed-certificate-as-a-trustedrootca-inwindows-vista.aspx