Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 231:

  You have a server named Server1. Server1 runs Windows Server 2012 R2.

  Server1 has two network adapters. Each network adapter must be configured as shown in the following table.

  

  You need to configure the correct IPv6 address prefix for each network adapter. Which prefix should you select for each network adapter?

  To answer, drag the appropriate IPv6 prefix to the correct network adapter in the answer area.

  Each prefix may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  Select and Place:

  

  

• Question 232:

  You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.

  You are running a training exercise for junior administrators. You are currently discussing spanned volumes.

  Which of the following is TRUE with regards to spanned volumes? (Choose all that apply.)

  A. Spanned volumes do not provide fault tolerance.
  B. Spanned volumes are a fault tolerant solution.
  C. You can extend a spanned volume onto a maximum of 16 dynamic disks.
  D. You cannot create a spanned volume using a system volume or boot volume.
  A. Spanned volumes do not provide fault tolerance.
  D. You cannot create a spanned volume using a system volume or boot volume.

  ---

  A spanned volume is a dynamic volume consisting of disk space on more than one physical disk. If a simple volume is not a system volume or boot volume, you can extend it across additional disks (up to 32 total) to create a spanned volume,

  or you can create a spanned volume in unallocated space on a dynamic disk.

  You need at least two dynamic disks in addition to the startup disk to create a spanned volume. You can extend a spanned volume onto a maximum of 32 dynamic disks.

  Spanned volumes are not fault tolerant.

• Question 233:

  In a domain running at the Windows Server 2012 R2 domain functional level, which of the following security principals can be members of a global group? (Choose all answers that are correct.)

  A. Users
  B. Computers
  C. Universal groups
  D. Global groups
  A. Users
  B. Computers
  D. Global groups

  ---

  A: Users can be security principals in a global group.

  B: Computers can be security principals in a global group.

  D: Global group can be security principals in a global group.

  Incorrect Answers:

  C: Universal groups cannot be security principals in a global group.

• Question 234:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

  On Server1, you create a printer named Printer1. You share Printer1 and publish Printer1 in Active Directory.

  You need to provide a group named Group1 with the ability to manage Printer1.

  What should you do?

  A. From Print Management, configure the Sharing settings of Printer1.
  B. From Print Management, configure the Security settings of Printer1.
  C. From Devices and Printers, configure the Sharing settings of Printer1.
  D. From Print Management, configure the Advanced settings of Printer1.
  B. From Print Management, configure the Security settings of Printer1.

  ---

  References: https://technet.microsoft.com/en-us/library/cc753109(v=ws.10).aspx

• Question 235:

  Your network contains an Active Directory domain named adatum.com. The network contains a member server that runs Windows Server 2012 R2.

  You log on to the member server by using the built-in domain Administrator account.

  When you run the Active Directory Administrative Center and attempt to move an organizational unit (OU) named OU-01, you receive an Access Denied message.

  The permissions for OU-01 are shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that you can move OU-01. What should you do?

  A. Remove the Everyone access control list (ACL) of OU-01.
  B. Log on to a domain controller by using an account that is a member of the Domain Admins group.
  C. Take ownership of OU-01.
  D. Assign the Administrators group full control permission on OU-01.
  A. Remove the Everyone access control list (ACL) of OU-01.

  ---

  References: https://www.oreilly.com/library/view/active-directory-cookbook/0596004648/ch05s08.html

• Question 236:

  You work as a senior administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers on the ABC.com network have Windows Server 2012 R2 installed. You are running a training exercise for junior administrators. You are currently discussing storage pools.

  Which of the following are TRUE with regards to storage pools?

  A. It allows you to group physical disks into one or more containers.
  B. It prevents you from grouping physical disks into one or more containers.
  C. It allows you to easily add storage with minor impact on users.
  D. It allows you to easily add storage without impacting users.
  A. It allows you to group physical disks into one or more containers.
  D. It allows you to easily add storage without impacting users.

• Question 237:

  Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server2 has the Windows Deployment Services server role installed. On Server1, you have a virtual machine named VM1. You plan to deploy an image to VM1 by using Windows Deployment Services (WDS). You need to ensure that VM1 can connect to Server1 by using PXE. Which settings should you configure on VM1? To answer, select the appropriate settings in the answer area.

  Hot Area:

  

  

  ---

  Virtual machines can be deployed to Hyper-V using Windows Deployment Services (WDS). To accomplish this requires the proper WDS infrastructure be in place and that the VM PXE boot using a Legacy Network Adapter.

  By default, there is only a “Standard Network Adapter” installed on the Virtual Machine, but for PXE functionality you will need to add a “Legacy Network Adapter”.

  Go to the “Legacy Network Adapter” that you just added and specify that it should use the Virtual Switch that you just created.

  Last but not least, you should change the BIOS boot priority to make sure that the Virtual Machine always tries to boot first using the “Legacy Network Adapter”. Just select the “Legacy Network Adapter” and move it to the top using the

  buttons.

  Start your Virtual Machine and now PXE boot should work.

  The Pre-Boot Execution Environment (PXE) provider for Windows Deployment Services provides client boot services over the network. It registers itself with the WDS Server service (the main server-side service of the Windows Deployment

  Services solution) and requests a remote procedure call (RPC) endpoint.

  After the Windows Deployment Services server role is installed, you must configure the server by using either the Windows Deployment Services MMC snap-in or the /Initialize-Server command-line option. The PXE provider must be configured properly before it can provide client boot services over the network.

  References:

  http://technet.microsoft.com/en-us/library/cc726550%28v=WS.10%29.aspx

• Question 238:

  Your company has an Active Directory domain. You log on to the domain controller. The Active Directory Schema snap-in is not available in the Microsoft Management Console (MMC).

  You need to access the Active Directory Schema snap-in. What should you do?

  A. Register Schmmgmt.dll.
  B. Log off and log on again by using an account that is a member of the Schema Admins group.
  C. Use the Ntdsutil.exe command to connect to the schema master operations master and open the schema for writing.
  D. Add the Active Directory Lightweight Directory Services (AD/LDS) role to the domain controller by using Server Manager.
  A. Register Schmmgmt.dll.

  ---

  Install the Active Directory Schema Snap-In

  You can use this procedure to first register the dynamic-link library (DLL) that is required for the Active Directory Schema snap-in. You can then add the snap-in to Microsoft Management Console (MMC).

  To install the Active Directory Schema snap-in:

  To open an elevated command prompt, click Start, type command prompt and then right-click Command Prompt when it appears in the Start menu. Next, click Run as administrator and then click OK.

  To open an elevated command prompt in Windows Server 2012 R2, click Start, type cmd, right-click cmd and then click Run as administrator.

  Type the following command, and then press ENTER:

  regsvr32 schmmgmt.dll

  Click Start, click Run, type mmc and then click OK.

  On the File menu, click Add/Remove Snap-in.

  Under Available snap-ins, click Active Directory Schema, click Add and then click OK.

  To save this console, on the File menu, click Save.

  In the Save As dialog box, do one of the following:

  To place the snap-in in the Administrative Tools folder, in File name, type a name for the snap-in, and then click Save.

  To save the snap-in to a location other than the Administrative Tools folder, in Save in, navigate to a location for the snap-in. In File name, type a name for the snap-in, and then click Save.

• Question 239:

  You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

  An iSCSI SAN is available on the network.

  Server1 hosts four virtual machines named VM1, VM2, VM3, VM4.

  You create a LUN on the SAN.

  You need to provide VM1 with access to the LUN. The solution must prevent other virtual machines from accessing the LUN.

  What should you configure?

  A. A fixed-size VHDX
  B. A dynamically expanding VHDX
  C. A fixed-size VHD
  D. A pass-through disk
  E. A dynamically expanding VHD
  D. A pass-through disk

  ---

  You can use physical disks that are directly attached to a virtual machine as a storage option on the management operating system. This allows virtual machines to access storage that is mapped directly to the server running Hyper-V without

  first configuring the volume. The storage can be either a physical disk which is internal to the server, or a SAN logical unit number (LUN) that is mapped to the server (a LUN is a logical reference to a portion of a storage subsystem). The

  virtual machine must have exclusive access to the storage, so the storage must be set in an Offline state in Disk Management. The storage is not limited in size, so it can be a multi-terabyte LUN. When using physical disks that are directly

  attached to a virtual machine, you should be aware of the following:

  This type of disk cannot be dynamically expanded.

  You cannot use differencing disks with them.

  You cannot take virtual hard disk snapshots.

  Att:

  If you are installing an operating system on the physical disk and it is in an Online state before the virtual machine is started, the virtual machine will fail to start. You must store the virtual machine configuration file in an alternate location

  because the physical disk is used by the operating system installation. For example, locate the configuration file on another internal drive on the server running Hyper-V.

• Question 240:

  Your network contains an Active Directory domain named contoso.com. The domain contains 20 computer accounts that reside in an organizational unit (OU) named OU1.

  A Group Policy object (GPO) named GPO1 is linked to OU1. GPO1 is used to assign several user rights to a user named User1.

  In the Users container, you create a new user named User2.

  You need to ensure that User2 is assigned the same user rights as User1 on all of the client computers in OU1.

  What should you do?

  A. Modify the settings in GPO1.
  B. Modify the link of GPO1.
  C. Link a WMI filter to GPO1.
  D. Move User2 to OU1.
  D. Move User2 to OU1.

  ---

  The GPO is linked to OU1. By moving User2 to OU1 the GPO will be applied to this user.