Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 221:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

  Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

  Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.

  Server1 is configured as shown in the following table.

  

  VM3 is used to test applications.

  You need to prevent VM3 from synchronizing its clock to Server1.

  What should you configure?

  A. NUMA topology
  B. Resource control
  C. Resource metering
  D. Virtual Machine Chimney
  E. The VLAN ID
  F. Processor Compatibility
  G. The startup order
  H. Automatic Start Action
  I. Integration Services
  J. Port mirroring
  I. Integration Services

  ---

  Integration Services settings on virtual machines includes services such as operating system shutdown, time synchronization, data exchange, Heart beat, and Backup (volume snapshot services. Thus you should disable the time synchronization using Integration Services.

  References: http://blogs.technet.com/b/virtualization/archive/2008/08/29/backing-up-hyper-v-virtual-machines.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p. 144

• Question 222:

  You have a Hyper-V host named server1 that runs windows server 2012 R2. Server1 host 50 virtual machines that run Windows Server 2012 R2.

  You enable and configure enhanced session mode on Server1.

  You need to identify a new functionality available for the virtual machines hosted on server1.

  What should you identify?

  A. Smart card authentication using virtual machine connections
  B. Redirection of RemoteFX USB drivers by using remote desktop connections
  C. Redirection of RemoteFX USB drivers using virtual machine connections
  D. smart card authentication using the remote desktop client
  B. Redirection of RemoteFX USB drivers by using remote desktop connections

• Question 223:

  Your network contains an Active Directory domain named adatum.com. The domain contains a server named FileServer1 that runs Windows Server 2012 R2. The File Server role service is installed on FileServer1.

  On FileServer1, you create a shared folder named Data.

  All users have laptop computers that run Windows 10. The users are frequently disconnected from the network.

  You need to ensure that when users open files from the Data share, the files are available automatically to the users when the users work offline.

  Which tool should you use on FileServer1? To answer, select the appropriate tool in the answer area.

  Hot Area:

  

  

  ---

  File Explorer

  http://hs.windows.microsoft.com/hhweb/content/m-en-us/p-6.2/id-93a550df-34cd-4497-85d0-8732602f5959

• Question 224:

  You have a server named Server1 that runs Windows Server 2012 R2.

  You need to create a virtual hard disk (VHD) named Disk1.vhdx on Server1.

  Which two tools can you use to achieve the goal? Each correct answer presents a complete solution.

  NOTE: Each correct selection is worth one point.

  A. the New-VirtualDisk cmdlet
  B. the New-VHD cmdlet
  C. the Disk Management console
  D. the diskpart.exe command
  E. the Server Manager console
  D. the diskpart.exe command

  ---

  You can create a VHD from either the Disk Management snap-in or the command line (diskpart). From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:\vdisks\disk1.vdh with a maximum file size of 16 GB (or 16,000 MB). DiskPart Microsoft DiskPart version 6.1.7100 Copyright (C) 1999-2008 Microsoft Corporation. On computer: WIN7 DISKPART> create vdisk file="C:\vdisks\disk1.vhd" maximum=16000

• Question 225:

  Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1 that runs Windows Server 2012 R2.

  You create a DHCP scope named Scope1. The scope has a start address of 192.168.1.10, an end address of 192.168.1.50, and a subnet mask of 255.255.255.192.

  You need to ensure that Scope1 has a subnet mask of 255.255.255.0.

  What should you do first?

  A. From the DHCP console, reconcile Scope1.
  B. From the DHCP console, delete Scope1.
  C. From the DHCP console, modify the Scope Options of Scope1.
  D. From Windows PowerShell, run the Set-DhcpServerv4Scope cmdlet.
  B. From the DHCP console, delete Scope1.

  ---

  You cannot change the subnet mask of a DHCP scope without deleting the scope and recreating it with the new subnet mask.

  Incorrect Answers:

  Set-DhcpServerv4Scope does not include a parameter for the subnet mask.

• Question 226:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has a virtual switch named RDS Virtual.

  You replace all of the network adapters on Server1 with new network adapters that support single-root I/O visualization (SR-IOV).

  You need to enable SR-IOV for all of the virtual machines on Server1.

  Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  A. On each virtual machine, modify the Advanced Features settings of the network adapter.
  B. Modify the settings of the RDS Virtual virtual switch.
  C. On each virtual machine, modify the BIOS settings.
  D. Delete, and then recreate the RDS Virtual virtual switch.
  E. On each virtual machine, modify the Hardware Acceleration settings of the network adapter.
  D. Delete, and then recreate the RDS Virtual virtual switch.
  E. On each virtual machine, modify the Hardware Acceleration settings of the network adapter.

  ---

  The first step when allowing a virtual machine to have connectivity to a physical network is to create an external virtual switch using Virtual Switch Manager in Hyper-V Manager. The additional step that is necessary when using SR-IOV is to ensure the checkbox is checked when the virtual switch is being created. It is not possible to change a "non SR-IOV mode" external virtual switch into an "SR-IOV mode" switch. The choice must be made a switch creation time. Thus you should first delete the existing virtual switch and then recreate it.

  E: Once a virtual switch has been created, the next step is to configure a virtual machine. SR-IOV in Windows Server "8" is supported on x64 editions of Windows "8" as a guest operating system (as in Windows "8" Server, and Windows "8" client x64, but not x86 client).We have rearranged the settings for a virtual machine to introduce sub-nodes under a network adapter, one of which is the hardware acceleration node. At the bottom is a checkbox to enable SR-IOV.

• Question 227:

  You have a server named Server1 that runs Windows Server 2012 R2.

  You apply a security policy to Server1 by using the Security Configuration Wizard (SCW).

  You need to roll back the security policy.

  Which settings will NOT be rolled back by the SCW?

  A. the system access control list (SACLs)
  B. the outbound authentication methods
  C. the network security rules
  D. the service startup mode
  A. the system access control list (SACLs)

  ---

  The SCW rollback feature does not include the ability to roll back SACLs.

  References: https://docs.microsoft.com/en-us/previous-versions/orphan-topics/ws.11/cc731389(v=ws.11)

• Question 228:

  Your network contains an Active Directory domain named contoso.com.

  You install Windows Server 2012 R2 on a new server named Server1 and you join Server1 to the domain.

  You need to ensure that you can view processor usage and memory usage information in Server Manager.

  What should you do?

  A. From Server Manager, click Configure Performance Alerts.
  B. From Performance Monitor, create a Data Collector Set (DCS).
  C. From Performance Monitor, start the System Performance Data Collector Set (DCS).
  D. From Server Manager, click Start Performance Counters.
  D. From Server Manager, click Start Performance Counters.

  ---

  You should navigate to the Server Manager snap-in and there click on All Servers, and then Performance Counters. The Performance Counters, when started can be set to collect and display data regarding processor usage, memory usage, amongst many other resources like disk-related and security related data, that can be monitored.

  Reference: http://technet.microsoft.com/en-us/library/bb734903.aspx

• Question 229:

  You are attempting to delete a global security group in the Active Directory Users and Computers console, and the console will not let you complete the task.

  Which of the following could possibly be causes for the failure? (Choose all answers that are correct.)

  A. There are still members in the group.
  B. One of the group's members has the group set as its primary group.
  C. You do not have the proper permissions for the container in which the group is located.
  D. You cannot delete global groups from the Active Directory Users and Computers console.
  B. One of the group's members has the group set as its primary group.
  C. You do not have the proper permissions for the container in which the group is located.

  ---

  B: If any member sets the group as its primary group, then the system does not permit the group to be deleted.

  C: You must have the appropriate Active Directory permissions for the container in which

  Incorrect Answers:

  A: It is possible to delete a group that has members. the group is located to delete it.

  D: Incorrect: It is possible to delete groups using the Active Directory Users and Groups console.

• Question 230:

  You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the DHCP Server server role installed.

  You need to convert 20 IP address leases to reservations by using Windows PowerShell.

  Which value should you use when running the Add-DhcpServer4Reservation cmdlet?

  A. the computer names
  B. the MAC address
  C. the SMSBIOS GUID
  D. the hardware IDs
  B. the MAC address