Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 241:

  Your network contains an Active Directory domain named contoso.com. The domain contains a member server named HVServer1. HVServer1 runs Windows Server 2012 R2 and has the Hyper-V server role installed. HVServer1 hosts two virtual machines named Server1 and Server2. Both virtual machines connect to a virtual switch named Switch1.

  On Server2, you install a network monitoring application named App1.

  You need to capture all of the inbound and outbound traffic to Server1 by using App1.

  Which two commands should you run from Windows PowerShell? (Each correct answer presents part of the solution. Choose two.)

  A. Get-VM "Server2 | Set-VMNetworkAdapter -IovWeight 1
  B. Get-VM "Server1 | Set-VMNetworkAdapter -Allow/Teaming On
  C. Get-VM "Server1 | Set-VMNetworkAdapter -PortMirroring Source
  D. Get-VM "Server2 | Set-VMNetworkAdapter -PortMirroring Destination
  E. Get-VM "Server1 | Set-VMNetworkAdapter -IovWeight 0
  F. Get-VM "Server2 | Set-VMNetworkAdapter-AllowTeaming On
  C. Get-VM "Server1 | Set-VMNetworkAdapter -PortMirroring Source
  D. Get-VM "Server2 | Set-VMNetworkAdapter -PortMirroring Destination

• Question 242:

  You work as a senior administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed. You are running a training exercise for junior administrators. You are currently discussing NIC Teaming.

  Which of the following is TRUE with regards to NIC Teaming? (Choose all that apply.)

  A. It allows for traffic failover to prevent connectivity loss if a network component fails.
  B. It prevents bandwidth aggregation.
  C. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 5 NICs in a team.
  D. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 32 NICs in a team.
  A. It allows for traffic failover to prevent connectivity loss if a network component fails.
  D. The Windows Server 2012 implementation of NIC Teaming supports a maximum of 32 NICs in a team.

  ---

  NIC teaming, also known as Load Balancing/Failover (LBFO), allows multiple network adapters to be placed into a team for the purposes of bandwidth aggregation, and/or traffic failover to maintain connectivity in the event of a network component failure. This feature has long been available from NIC vendors but until now NIC teaming has not been included with Windows Server. Do I have to select a standby member to get fault tolerance (failover)? No. IN any team with two or more network adapters if a network adapter fails in an Active/Active configuration, the traffic on that network adapter will gracefully failover to the other network adapters in the team even if none of the other adapters are in standby mode. Number of NICs in a team in a native host NIC teaming requires the presence of at least one Ethernet NIC. A team of one NIC may be used for separation of traffic using VLANs. Obviously a team with only one team member has no failure protection. Fault protection (failover) requires a minimum of two Ethernet NICs in the team. The Windows Server 2012 implementation supports up to 32 NICs in a team. Number of team interfaces for a team Windows Server 2012 supports up to 32 team interfaces.

• Question 243:

  You install Windows Server 2012 R2 on a standalone server named Server1. You configure Server1 as a VPN server.

  You need to ensure that client computers can establish PPTP connections to Server1.

  Which two firewall rules should you create? (Each correct answer presents part of the solution. Choose two.)

  A. An inbound rule for protocol 47
  B. An outbound rule for protocol 47
  C. An inbound rule for TCP port 1723
  D. An inbound rule for TCP port 1701
  E. An outbound rule for TCP port 1723
  F. An outbound rule for TCP port 1701
  A. An inbound rule for protocol 47
  C. An inbound rule for TCP port 1723

  ---

  The following is a list of firewall ports which need to be opened for the various VPN tunnel protocols:

  For PPTP:

  IP Protocol=TCP, TCP Port number=1723 <- Used by PPTP control path

  IP Protocol=GRE (value 47) <- Used by PPTP data path

  For L2TP:

  IP Protocol Type=UDP, UDP Port Number=500 <- Used by IKEv1 (IPSec control path)

  IP Protocol Type=UDP, UDP Port Number=4500 <- Used by IKEv1 (IPSec control path)

  IP Protocol Type=ESP (value 50) <- Used by IPSec data path

  For SSTP:

  IP Protocol=TCP, TCP Port number=443 <- Used by SSTP control and data path

  For IKEv2:

  IP Protocol Type=UDP, UDP Port Number=500 <- Used by IKEv2 (IPSec control path)

  IP Protocol Type=UDP, UDP Port Number=4500 <- Used by IKEv2 (IPSec control path)

  IP Protocol Type=ESP (value 50) <- Used by IPSec data path

• Question 244:

  Your network contains a server named Server1 and 10 Web servers. All servers run Windows Server 2012 R2.

  You create a Windows PowerShell Desired State Configuration (DSC) to push the settings from Server1 to all of the Web servers.

  On Server1, you modify the file set for the Web servers.

  You need to ensure that all of the Web servers have the latest configurations.

  Which cmdlet should you run on Server1?

  A. Get-DcsConfiguration
  B. Restore-DcsConfiguration
  C. Set-DcsLocalConfigurationManager
  D. Start-DcsConfiguration
  D. Start-DcsConfiguration

• Question 245:

  You have a DHCP server named Server1 that runs Windows Server 2012 R2.

  On Server1, you run the commands as shown in the exhibit. (Click the Exhibit button.)

  

  To answer, complete each statement according to the information presented in the exhibit. Each correct selection is worth one point.

  Hot Area:

  

  

• Question 246:

  You have a print server named Server1.

  You install a printer on Server1. You share the printer as Printer1.

  You need to configure Printer1 to be available only from 19:00 to 05:00 every day.

  Which settings from the properties of Printer1 should you modify?

  A. Sharing
  B. Security
  C. Advanced
  D. Device Settings
  E. Ports
  C. Advanced

  ---

  When navigating to the printer properties, the Properties tab is divided into several different tabs of which the Advanced tab will give you access to the scheduling where you can configure the availability of the printer. Reference: http://technet.microsoft.com/en-us/library/cc722526.aspx

• Question 247:

  You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain, including domain controllers, have Windows Server 2012 R2 installed.

  ABC.com has a domain controller, named ABC-DC01, which contains the ABC.com domain's primary DNS zone. ABC.com's workstations refer to ABC-DC01 as their primary DNS server.

  You have been instructed to make sure that any DNS requests that are not for the ABC.com domain, is resolved by ABC-DC01 querying the DNS server of ABC.com's Internet Service Provider (ISP).

  Which of the following actions should you take?

  A. You should consider configuring a reverse lookup zone.
  B. You should consider configuring forward lookup zone.
  C. You should consider configuring Forwarders.
  D. You should consider configuring 019 IP Layer Forwarding.
  C. You should consider configuring Forwarders.

  ---

  A forwarder is a Domain Name System (DNS) server on a network that forwards DNS queries for external DNS names to DNS servers outside that network. You can also forward queries according to specific domain names using conditional

  forwarders.

  You designate a DNS server on a network as a forwarder by configuring the other DNS servers in the network to forward the queries that they cannot resolve locally to that DNS server. By using a forwarder, you can manage name resolution

  for names outside your network, such as names on the Internet, and improve the efficiency of name resolution for the computers in your network.

• Question 248:

  You have a print server named Server1 that runs Windows Server 2012 R2.

  On Server1, you create and share a printer named Printer1.

  The Advanced settings of Printer1 are shown in the Advanced exhibit. (Click the Exhibit button.)

  

  The Security settings of Printer1 are shown in the Security exhibit. (Click the Exhibit button.)

  

  The Members settings of a group named Group1 are shown in the Group1 exhibit. (Click the Exhibit button.)

  Select Yes if the statement can be shown to be true based on the available information; otherwise select No. Each correct selection is worth one point.

  Hot Area:

  

  

• Question 249:

  Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains two domain controllers named DC1 and DC2 that run Windows Server 2012 R2.

  The domain contains a user named User1 and a global security group named Group1.

  You need to add a new domain controller to the domain.

  You install Windows Server 2012 R2 on a new server named DC3.

  Which cmdlet should you run next?

  A. Add-AdPrincipalGroupMembership
  B. Install-AddsDomainController
  C. Install WindowsFeature
  D. Install AddsDomain
  E. Rename-AdObject
  F. Set-AdAccountControl
  G. Set-AdGroup
  H. Set-User
  C. Install WindowsFeature

  ---

  It is the 2nd step when installing a DC by PowerShell on a fresh server.

• Question 250:

  You have a Hyper-V host named Server1 that runs Windows Server 2008 R2. All of the virtual machines on Server1 use VHDs. You install the Hyper-V server role on a server named Server2 that runs Windows Server 2012 R2. Server2 has the same hardware configurations as Server1. You plan to migrate the Hyper-V host from Server1 to Server2 by using the Windows Server Migration Tools. In the table below, identify what can be migrated by using the Windows Server Migration Tools. Make only one selection in each row. Each correct selection is worth one point.

  Hot Area: