Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 251:

  A company's server deployment team needs to introduce many new Windows Server 2012 R2 domain controllers throughout the network into a single Windows Server 2008 R2 domain. The team has chosen to use Windows PowerShell.

  Which Windows PowerShell module includes the command-line options for installing domain controllers?

  A. AD DS Administration cmdlets
  B. AD DS Deployment cmdlets
  C. AD CS Deployment cmdlets
  D. AD CS Administration cmdlets
  B. AD DS Deployment cmdlets

  ---

  First use the Import-Module ADDSDeployment command in PowerShell璱t includes the cmdlets needed to add new domain controllers. Then run Install-ADDSDomainController along with the required arguments. Quick Tip: DCPromo.exe has been deprecated but can still be used along with an answer file, and ADPrep.exe runs automatically when needed (but can be run with elevated rights for more control).

• Question 252:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.

  You are in the process of installing a Server Core installation of Windows Server 2012 on a new Contoso.com server, named ENSUREPASS-SR13.

  Which of the following is TRUE with regards to an installing a Server Core installation of Windows Server 2012? (Choose all that apply.)

  A. The Server Graphical Shell is installed, but not enabled.
  B. Server roles can be configured locally via the command prompt using Windows PowerShell.
  C. Server roles can be configured locally via Server Manager.
  D. You are able to access the Microsoft Management Console locally.
  E. The Desktop Experience is not available.
  B. Server roles can be configured locally via the command prompt using Windows PowerShell.
  E. The Desktop Experience is not available.

  ---

  Server Core is a minimal server installation option for computers running on the operating system. Server Core provides a low-maintenance server environment with limited functionality.

  The minimal nature of Server Core creates limitations:

  There is no Windows shell and very limited GUI functionality. The Server Core interface is a command prompt with PowerShell support.

  

  There is limited MSI support (unattended mode only).

  

  Server Graphical Shell is not installed.

  

  Microsoft Management Console: not available locally.

  

  Desktop Experience: not available.

  

• Question 253:

  You have a server that runs Windows Server 2012 R2.

  The disks on the server are configured as shown in the exhibit. (Click the Exhibit button.)

  

  You need to create a storage pool that contains Disk 1 and Disk 2. What should you do first?

  A. Delete volume E
  B. Convert Disk 1 and Disk 2 to dynamic disks
  C. Convert Disk 1 and Disk 2 to GPT disks
  D. Create a volume on Disk 2
  A. Delete volume E

  ---

  A. Storage Pools use unallocated space

  There is no way to create a storage pool with existing data. Storage pools are only a collection of drives that are managed by windows.

• Question 254:

  A company's server virtualization team needs to provision a series of Hyper-V workloads to use existing network storage arrays. The team has chosen to use Fibre Channel ports within the guest operating systems.

  Which of the following Windows Server versions can be used as guest operating systems when using Hyper-V Fibre Channel ports?

  A. 2003 R2
  B. 2008
  C. 2003
  D. 2012
  B. 2008
  D. 2012

  ---

  Windows Server 2008, 2008 R2, and 2012 R2 can be guest operating systems when using Hyper-V Fibre Channel host bus adaptors (HBAs). Updated HBA drivers are needed along with NPIV-enabled (N_Port ID Virtualization) SANs. Quick Tip: Virtual Fibre Channel logical units cannot be used as boot media.

• Question 255:

  Your network contains three servers. The servers are configured as shown in the following table.

  

  Your company plans to standardize all of the servers on Windows Server 2012 R2. You need to recommend an upgrade path for each server. The solution must

  meet the following requirements:

  ꞏ Upgrade the existing operating system whenever possible.

  ꞏ Minimize hardware purchases.

  Which upgrade path should you recommend for each server?

  To answer, drag the appropriate upgrade path to each server in the answer area. Each upgrade path may be used once, more than once, or not at all.

  Select and Place:

  

  

  ---

  Upgrade paths for Windows Server 2012 R2 are limited. In fact, it's easier to specify when you can perform an upgrade than when you can't. If you have a 64-bit computer running Windows Server 2008 or Windows Server 2008 R2, then you can upgrade it to Windows Server 2012 R2 as long as you use the same operating system edition. Windows Server 2012 R2 does not support the following: Upgrades from Windows Server versions prior to Windows Server 2008 Upgrades from pre-RTM editions of Windows Server 2012 R2 Upgrades from Windows workstation operating systems Cross-platform upgrades, such as 32-bit Windows Server 2008 to 64-bit Windows Server 2012 Upgrades from any Itanium edition Cross-language upgrades, such as from Windows Server 2008, U.S.English to Windows Server 2012, French In any of these cases, the Windows Setup program will not permit the upgrade to proceed. References: http://technet.microsoft.com/en-us/library/jj134246.aspx

• Question 256:

  You have a Hyper-V host named Hyperv1 that runs Windows Server 2012 R2. Hyperv1 hosts a virtual machine named Server1. Server1 uses a disk named Server1.vhdx that is stored locally on Hyperv1.

  You stop Server1, and then you move Server1.vhdx to an iSCSI target that is located on another server.

  You need to configure Server1 to meet the following requirements:

  Ensure that Server1 can start by using Server1.vhdx.

  Prevent Server1.vhdx from consuming more than 500 IOPS on the iSCSI target.

  Which two objects should you configure?

  To answer, select the appropriate two objects in the answer area.

  Hot Area:

  

  

• Question 257:

  You have a server named Server1 that runs Windows Server 2012 R2. Server1 has 2 dual-core processors and 16 GB of RAM.

  You install the Hyper-V server role in Server1.

  You plan to create two virtual machines on Server1.

  You need to ensure that both virtual machines can use up to 8 GB of memory. The solution must ensure that both virtual machines can be started simultaneously.

  What should you configure on each virtual machine?

  A. Dynamic Memory
  B. NUMA topology
  C. Memory weight
  D. Resource Control
  A. Dynamic Memory

• Question 258:

  Your network contains an Active Directory domain named contoso.com. The domain contains an application server named Server1. Server1 runs Windows Server 2012 R2.

  Server1 is configured as an FTP server.

  Client computers use an FTP Application named App1.exe. App1.exe uses TCP port 21 as the control port and dynamically requests a data port.

  On Server1, you create a firewall rule to allow connections on TCP port 21.

  You need to configure Server1 to support the client connections from App1.exe.

  What should you do?

  A. Run netsh firewall add portopening TCP 21 dynamicftp.
  B. Create an isolation connection security rule.
  C. Run Set-NetFirewallSetting 璄nableStatefulFTP True
  D. Create a tunnel connection security rule.
  C. Run Set-NetFirewallSetting 璄nableStatefulFTP True

  ---

  The Set-NetFirewallSetting cmdlet modifies the global firewall settings of the target computer. The 璄nableStatefulFtp parameter configures how Windows Firewall with Advanced Security handles FTP traffic that uses an initial connection on one port to request a data connection on a different port.

  References: https://docs.microsoft.com/en-us/powershell/module/netsecurity/set-netfirewallsetting?view=win10-ps

• Question 259:

  You have a print server named Server1. Server1 runs Windows Server 2008 R2 Service Pack 1 (SP1). You have a file server named Server2. Server2 runs Windows Server 2012 R2.

  You need to migrate all of the printers on Server1 to Server2.

  Which actions should you perform on the servers?

  To answer, drag the appropriate action to the correct servers in the answer area. Each action may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  Select and Place:

  

  

• Question 260:

  You have a server named Server1 that runs a Server Core installation of Windows Server 2012 R2.

  Server1 is configured to obtain an IPv4 address by using DHCP.

  You need to configure the IPv4 settings of the network connection on Server1 as follows:

  IP address: 10.1.1.1

  

  Subnet mask: 255.255.240.0

  

  Default gateway: 10.1.1.254

  

  What should you run?

  A. netsh.exe
  B. netcfg.exe
  C. msconfig.exe
  D. ipconfig.exe
  A. netsh.exe

  ---

  In order to configure TCP/IP settings such as the IP address, Subnet Mask, Default Gateway, DNSand WINS addresses and many other options you can use Netsh.exe.