Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 211:

  Your network contains an Active Directory domain named contoso.com. You have a Group Policy object (GPO) named GP1 that is linked to the domain. GP1 contains a software restriction policy that blocks an application named App1.

  You have a workgroup computer named Computer1 that runs Windows 8. A local Group Policy on Computer1 contains an application control policy that allows App1.

  You join Computer1 to the domain.

  You need to prevent App1 from running on Computer1.

  What should you do?

  A. From Computer1, run gpupdate/force.
  B. From Group Policy Management, add an application control policy to GP1.
  C. From Group Policy Management, enable the Enforced option on GP1.
  D. In the local Group Policy of Computer1, configure a software restriction policy.
  B. From Group Policy Management, add an application control policy to GP1.

  ---

  AppLocker policies take precedence over policies generated by SRP on computers that are running an operating system that supports AppLocker. AppLocker policies in the GPO are applied, and they supersede the policies generated by SRP in the GPO and local AppLocker policies or policies generated by SRP.

• Question 212:

  Your network contains an Active Directory domain named contoso.com. All client computer accounts are in an organizational unit (OU) named AllComputers. Client computers run either Windows 7 or Windows 8.1.

  You create a Group Policy object (GPO) named GP1.

  You link GP1 to the AllComputers OU.

  You need to ensure that GP1 applies only to computers that have more than 8 GB of memory.

  What should you configure?

  A. The Security settings of GP1
  B. The Block Inheritance option for AllComputers
  C. The Security settings of AllComputers
  D. The WMI filter for GP1
  D. The WMI filter for GP1

  ---

  Windows Management Instrumentation (WMI) filters allow you to dynamically determine the scope of Group Policy objects (GPOs) based on attributes of the target computer. When a GPO that is linked to a WMI filter is applied on the target computer, the filter is evaluated on the target computer. If the WMI filter evaluates to false, the GPO is not applied (except if the client computer is running Windows Server, in which case the filter is ignored and the GPO is always applied). If the WMI filter evaluates to true, the GPO is applied. WMI filters, like GPOs, are stored on a per-domain basis. A WMI filter and the GPO it is linked to must be in the same domain.

  References: Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 10: Implementing Group Policy, p.470, 482 http://technet.microsoft.com/en-us/library/jj134176 WMI filtering using GPMC

• Question 213:

  You have a server that runs a Server Core installation of Windows Server 2012 R2.

  You need to change the DNS server used by IPv6.

  What should you do?

  A. From Sconfig, configure the Network Settings.
  B. Run the sc.exe command and specify the config parameter.
  C. From Windows PowerShell, run the Set-NetIpv6Protocol cmdlet.
  D. From Windows PowerShell, run the Set-DnsClientServerAddress cmdlet.
  D. From Windows PowerShell, run the Set-DnsClientServerAddress cmdlet.

  ---

  The Set-DnsClientServerAddresscmdlet sets one or more IP addresses for DNS servers associated with an interface. This cmdlet statically adds DNS server addresses to the interface. If this cmdlet is used to add DNS servers to the

  interface, then the DNS servers will override any DHCP configuration for that interface.

  PS C:\> Set-DnsClientServerAddress -InterfaceIndex 12 -ServerAddresses "10.0.0.1","10.0.0.2")

  References:

  http://technet.microsoft.com/en-us/library/jj592692.aspx

  http://technet.microsoft.com/en-us/library/jj590768.aspx

• Question 214:

  You have a server named Server1. Server1 runs Windows Server 2012 R2.

  Server1 has a thin provisioned disk named Disk1.

  You need to expand Disk1.

  Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  A. From File and Storage Services, extend Disk1.
  B. From File and Storage Services, add a physical disk to the storage pool.
  C. From Disk Management, extend the volume.
  D. From Disk Management, delete the volume, create a new volume, and then format the volume.
  E. From File and Storage Services, detach Disk1.
  A. From File and Storage Services, extend Disk1.
  B. From File and Storage Services, add a physical disk to the storage pool.

  ---

  Step 1 (B): if required add physical disk capacity.

  Step 2 (A): Dynamically extend the virtual disk (not volume).

  The File and Storage Services role and the Storage Services role service are installed by default, but without any additional role services. This basic functionality enables you to use Server Manager or Windows PowerShell to manage the

  storage functionality of your servers.

  Windows Server 2012 Storage Space subsystem now virtualizes storage by abstracting multiple physical disks into a logical construct with specified capacity. The process is to group selected physical disks into a container, the so-called storage pool, such that the total capacity collectively presented by those associated physical disks can appear and become manageable as a single and seemingly continuous space. Subsequently storage administrator creates a virtual disk based on a storage pool, configure a storage layout which is essentially a RAID level, and expose the storage of the virtual disk as a drive letter or a mapped folder in Windows Explorer.

  The system administrator uses File and Storage Services in Server Manager or the Disk Management tool tore scan the disk, bring the disk online, and extend the disk size.

• Question 215:

  You have a server named Data1 that runs a Server Core Installation of Windows Server 2012 R2 Standard.

  You need to configure Data1 to run a Server Core Installation of Windows Server 2012 R2 Datacenter. You want to achieve this goal by using the minimum amount of administrative effort.

  What should you perform?

  A. an online servicing by using Dism
  B. an upgrade installation of Windows Server 2012 R2
  C. clean installation of Windows Server 2012 R2
  D. an offline servicing by using Dism
  A. an online servicing by using Dism

• Question 216:

  You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters are connected to a network named LAN1. The two other network adapters are connected to a network

  named LAN2.

  You need to create a network adapter team from the three network adapters connected to LAN1.

  Which tool should you use?

  A. Routing and Remote Access
  B. Network and Sharing Center
  C. Server Manager
  D. Network Load Balancing Manager
  C. Server Manager

• Question 217:

  Which of the following are the two built-in user accounts created automatically on a computer running Windows Server 2012 R2?

  A. Network
  B. Interactive
  C. Administrator
  D. Guest
  C. Administrator
  D. Guest

  ---

  C. Correct: By default, the two built-in user accounts created on a computer running Windows Server 2012 are the Administrator account and the Guest account. D. Correct: By default, the two built-in user accounts created on a computer running Windows Server 2012 are the Administrator account and the Guest account.

  Incorrect Answers:

  A: There is no Network account in Windows Server 2012 R2.

  B: There is no Interactive account in Windows Server 2012 R2.

• Question 218:

  You perform a Server Core Installation of Windows Server 2012 R2 on a server named Server1.

  You need to add a graphical user interface (GUI) to Server1.

  Which tool should you use?

  A. The setup.exe command
  B. The dism.exe command
  C. The imagex.exe command
  D. The Install-WindowsFeature cmdlet
  B. The dism.exe command

  ---

  The DISM command is called by the Install-WindowsFeature command. Here is the systax for DISM:

  Dism/online /enable-feature /featurename: ServerCore-FullServer /featurename:ServerGui-Shell /featurename:Server-Gui-Mgmt

  References: https://blogs.technet.microsoft.com/john_taylor/2013/01/08/converting-from-server-2012-core-install-to-full-gui/

  https://docs.microsoft.com/en-us/powershell/module/servermanager/install-windowsfeature?view=winserver2012r2-ps

• Question 219:

  You have an offline image of a server that runs Windows Server 2012 R2. You need to enable Remote Desktop Services (RDS) on the server. What should you use?

  A. the sc.exe command with the config parameter
  B. the Add-RDServerSessionHost cmdlet
  C. the configure-smremoting.exe command with the 璄nable parameter
  D. the Install-WindowsFeature cmdlet
  C. the configure-smremoting.exe command with the 璄nable parameter

  ---

  Enable the Remote-Desktop-Services feature in the offline image by executing the command Dism /Enable-Feature /FeatureName:Remote-Desktop-Services. Remote management can be also be configured using the PowerShell command Configure-SMRemoting.exe -Enable or the 璂isable switch if choosing to disable the service.

• Question 220:

  You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the DHCP Server server role installed.

  You need to create an IPv6 reservation for Server2.

  Which two values should you obtain from Server2? (Each correct answer presents part of the solution. Choose two.)

  A. the hardware ID
  B. the DHCPv6 unique identifier
  C. the DHCPv6 identity association ID
  D. the SMSBIOS GUID
  E. the MAC address
  B. the DHCPv6 unique identifier
  C. the DHCPv6 identity association ID

  ---

  The Add-DhcpServerv6Reservation cmdlet reserves a specified IPv6 address for the client identified by the specified Dynamic Host Configuration Protocol (DHCP) v6 unique identifier (ID) (DUID) and identity association ID (IAID).