Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 171:

  You have a server named Server1. Server1 runs a Server Core installation of Windows Server 2012 R2. The local area connection on Server1 has the following configuration: IP address: 10.1.1.1

  

  Subnet mask: 255.255.240.0

  

  Default gateway: 10.1.1.254

  

  Preferred DNS server:

  

  The network contains a DNS server that has an IPv4 address of 10.1.1.200. You need to configure Server1 to use 10.1.1.200 as the preferred DNS server. The solution must not change any other settings on Server1. Which command should you run?

  A. sconfig.cmd
  B. net.exe
  C. Set-NetIPInterface
  D. netsh.exe
  A. sconfig.cmd

  ---

  In Windows Server 2012 R2, you can use the Server Configuration tool (Sconfig.cmd) to configure and manage several common aspects of Server Core installations.

  Network settings

  You can configure the IP address to be assigned automatically by a DHCP Server or you can assign a static IP address manually. This option allows you to configure DNS Server settings for the server as well.

• Question 172:

  You have a server named Server1 that runs Windows Server 2012 R2.

  You need to switch Server1 to a Server Core installation of Windows Server 2012 R2.

  What command should you run?

  To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

• Question 173:

  Your network contains an Active Directory domain named contoso.com.

  An organizational unit (OU) named OU1 contains the user accounts and the computer accounts for laptops and desktop computers. A Group Policy object (GPO) named GP1 is linked to OU1. You need to ensure that the configuration

  settings in GP1 are applied only to the laptops in OU1. The solution must ensure that GP1 is applied automatically to new laptops that are added to OU1.

  What should you do?

  A. Modify the GPO Status of GP1.
  B. Configure the WMI Filter of GP1.
  C. Modify the security settings of GP1.
  D. Modify the security settings of OU1.
  B. Configure the WMI Filter of GP1.

• Question 174:

  You have a server named Server1. Server1 runs Windows Server 2012 R2 and has the File and Storage Services server role installed.

  You attach four 500-GB disks to Server1.

  You need to configure the storage to meet the following requirements:

  Storage for an application named Application1 must be provided. Application1 requires 20 GB and will require a maximum of 800 GB in three years.

  Storage for an application named Application2 must be provided. Application2 requires 20 GB and will require a maximum of 900 GB in three years.

  The solution must provide the ability to dynamically add storage without requiring configuration changes to the applications.

  The storage must be available if a single disk fails.

  Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  A. From File and Storage Services, create virtual disks by using fixed provisioning.
  B. From File and Storage Services, create virtual disks by using thin provisioning.
  C. From File and Storage Services, create a storage pool that uses all four disks.
  D. From Disk Management, create a new RAID-5 volume that uses all four disks.
  E. From Disk Management, create two new mirror volumes that use two disks each.
  B. From File and Storage Services, create virtual disks by using thin provisioning.
  C. From File and Storage Services, create a storage pool that uses all four disks.

  ---

  Reference: http://technet.microsoft.com/en-us/library/jj822937.aspx

• Question 175:

  Your network contains an Active Directory domain named adatum.com. The domain contains a member server named Server1 and a domain controller named DC2. All servers run Windows Server 2012 R2.

  On DC2, you open Server Manager and you add Server1 as another server to manage. From Server Manager on DC2, you right-click Server1 as shown in the exhibit.

  You need to ensure that when you right-click Server1, you see the option to run the DHCP console.

  What should you do?

  

  A. On Server1, install the Feature Administration Tools.
  B. In the domain, add DC1 to the DHCP Administrators group.
  C. On DC2 and Server1, run winrm quickconfig.
  D. On DC2, install the Role Administration Tools.
  D. On DC2, install the Role Administration Tools.

• Question 176:

  You have a file server named Server1 that runs Windows Server 2012 R2. Server1 contains a folder named Folder1.

  You share Folder1 as Share1 by using Advanced Sharing. Access-based enumeration is enabled. Share1 contains an application named Appl.exe.

  You configure the NTFS permissions on Folder1 as shown in the following table.

  

  The members of Group2 report that they cannot make changes to the files in Share1. The members of Group1 and Group2 run Appl.exe successfully.

  You need to ensure that the members of Group2 can edit the files in Share1.

  What should you do?

  A. Replace the NTFS permissions on all of the child objects.
  B. Edit the Share permissions.
  C. Edit the NTFS permissions.
  D. Disable access-based enumeration.
  C. Edit the NTFS permissions.

  ---

  Share permissions and NTFS permissions are independent in the sense that neither changes the other. The final access permissions on a shared folder are determined by taking into consideration both the share permission and the NTFS

  permission entries. The more restrictive permissions are then applied.

  References:

  Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter8: File Services and Storage, Lesson 2: Provisioning and Managing Shared Storage, p.388

• Question 177:

  Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.

  In the main office, you have a server named Server1 that runs Windows Server 2012 R2.

  Server1 is configured to use an IPv4 address only.

  You need to assign a multicast IPv6 address to Server1.

  Which IPv6 address should you assign to Server1?

  A. fd00:ab32:14:ad88:ac:58:abc2:4
  B. 2001:ab32:145c::32cc:401b
  C. fe80:ab32:145c::32cc:401b
  D. ff00:3fff:65df:145c:dca8::82a4
  D. ff00:3fff:65df:145c:dca8::82a4

  ---

  References: https://technet.microsoft.com/pt-pt/library/cc757359(v=ws.10).aspx

• Question 178:

  Your network contains an Active Directory domain named adatum.com. The domain contains a server named Server1 that runs Windows Server 2012 R2.

  On a server named Core1, you perform a Server Core Installation of Windows Server 2012 R2. You join Core1 to the adatum.com domain.

  You need to ensure that you can use Event Viewer on Server1 to view the event logs on Core1.

  What should you do on Core1?

  A. Run the Disable NetFirewallRule cmdlet.
  B. Install Remote Server Administration Tools (RSAT).
  C. Install Windows Management Framework.
  D. Run the Enable-Com + Network Access Firewall Rule.
  D. Run the Enable-Com + Network Access Firewall Rule.

  ---

  Information regarding IPsec policy changes, etc. can be found in the Event Viewer. Thus you need to enable the NetFirewallRule command. This will allow you to view the event logs.

• Question 179:

  Your network contains an Active Directory domain named contoso.com. The domain contains 25 servers. All servers run Windows Server 2012 R2.

  You need to create a Windows Firewall rule to prevent administrators from using Internet Explorer to access the Internet while they are logged on interactively to the servers. The solution must not prevent administrators from accessing websites on the internal network.

  How should you configure the rule?

  To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  References: https://technet.microsoft.com/en-us/library/cc811533(v=ws.11).aspx

• Question 180:

  You deploy a Server with a GUI installation of Windows Server 2012 R2 Datacenter. From Windows PowerShell, you run the following command: Remove-WindowsFeature ServerGui-Shell. In the table below, identify which tools are available on Server1 and which tools are unavailable on Server1. Make only one selection in each row. Each correct selection is worth one point.

  Hot Area:

  

  

  ---

  When you uninstall "Server-GUI-Shell" you are left with a "Minimal Server Interface" server. So, File Explorer and IE10 are unavailable, but MMC and Server Manager work.

  References:

  Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 2: Deploying Servers, p.44

  Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2: Chapter 1: Installing and Configuring Servers, p.19-22