Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 161:

  Your network contains an Active Directory forest named contoso.com.

  The forest contains a child domain named europe.contoso.com. The europe.contoso.com child domain contains a server named Server1 that runs Windows Server 2012 R2.

  You install the DHCP Server server role on Server1.

  You have access to the administrative accounts shown in the following table.

  

  You need to authorize the DHCP server role.

  Which user account should you use?

  A. Admin1
  B. Admin2
  C. Admin3
  D. Admin4
  D. Admin4

  ---

  References: https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2003/cc759688(v=ws.10)

• Question 162:

  You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2 Datacenter.

  You have a WIM file that contains the four images of Windows Server 2012 R2 as shown in the Images exhibit. (Click the Exhibit button.)

  

  You review the installed features on Server1 as shown in the Features exhibit. (Click the Exhibit button.)

  

  You need to install the Server Graphical Shell feature on Server1.

  Which two possible sources can you use to achieve this goal? (Each correct answer presents a complete solution. Choose two.)

  A. Index 1
  B. Index 2
  C. Index 3
  D. Index 4
  B. Index 2
  D. Index 4

  ---

  These images (since they are Full GUI, not CORE), contain the binaries necessary to install all GUI elements. When you install Windows Server 2012 R2, you can choose between Server Core Installation and Server with a GUI. The "Server with a GUI" option is the Windows Server 2012 R2 equivalent of the Full installation option available in Windows Server 2008 R2. The "Server Core Installation" option reduces the space required on disk, the potential attack surface, and especially the servicing requirements, so we recommend that you choose the Server Core installation unless you have a particular need for the additional user interface elements and graphical management tools that are included in the "Server with a GUI" option. For this reason, the Server Core installation is now the default. Because you can freely switch between these options at any time later, one approach might be to initially install the Server with a GUI option, use the graphical tools to configure the server, and then later switch to the Server Core Installation option.

• Question 163:

  You have a server named Server1 that runs a Server Core Installation of Windows Server 2012 R2. You attach a 4-TB disk to Server1.

  The disk is configured as an MBR disk. You need to ensure that you can create a 4-TB volume on the disk.

  Which Diskpart command should you use?

  A. Expand
  B. Attach
  C. Automount
  D. Convert
  D. Convert

  ---

  You can use Diskpart to convert a basic disk to a dynamic disk. The basic disk can either be empty or contain either primary partitions or logical drives. The basic disk can be a data disk or system or boot drive. A MBR file structure is only

  capable of 2TB maximum. The disk will have to be converted to a GPT file structure.

  GPT is capable of 18 exabytes volumes. Convert gpt ?Converts an empty basic disk with the master boot record (MBR) partition style into a basic disk with the GUID partition table (GPT) partition style. The disk may be a basic or a dynamic

  disk but it must not contain any valid data partitions or volumes.

• Question 164:

  DRAG DROP

  Your company has a main office that contains 225 client computers. The client computers are located on a subnet that uses the network ID of 10.10.1.0/24.

  The company plans to open two branch offices. The offices will be configured as shown in the following table.

  

  You need to select a network prefix for each office to ensure that there are enough IPv4 addresses for each client computer.

  The solution must minimize the number of unused IP addresses.

  Which network prefixes should you select? To answer, drag the appropriate network prefix to the correct branch office in the answer area.

  Select and Place:

  

  

  ---

  Box 1: /25

  Branch1 has 100 client computers. A /25 CIDR network supports 126 client computers.

  Box 2: /26

  Branch2 has 50 client computers. A /26 CIDR network supports 62 client computers.

  References:

  https://www.tutorialspoint.com/ipv4/ipv4_subnetting.htm

• Question 165:

  Your network contains two servers named Server1 and Server2 that run Windows Server 2012 R2. You need to install the Remote Desktop Services server role on Server2 remotely from Server1. Which tool should you use?

  A. The dsadd.exe command
  B. The Server Manager console
  C. The Remote Desktop Gateway Manager console
  D. The Install-RemoteAccess cmdlet
  B. The Server Manager console

• Question 166:

  Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named Server1 that runs Windows Server 2012 R2.

  On Server1, you create a work folder named Work1.

  A user named User1 connects to Work1 from a computer named Computer1.

  You need to identify the last time the documents in Work1 were synchronized successfully from Computer1.

  What should you do?

  A. From Server Manager, review the properties of Computer1.
  B. From Windows PowerShell, run the Get-SyncUserSettingscmdlet.
  C. From Windows PowerShell, run the Get-SyncSharecmdlet.
  D. From Server Manager, review the properties of User1.
  D. From Server Manager, review the properties of User1.

• Question 167:

  Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2. Server1 runs Windows Server 2012 R2. Server2 runs Windows Server 2008 R2 Service Pack 1 (SP1) and has the DHCP Server server role installed.

  You need to manage DHCP on Server2 by using the DHCP console on Server1.

  What should you do first?

  A. From Windows PowerShell on Server2, run Enable-PSRemoting cmdlet.
  B. From Windows PowerShell on Server1, run Install-Windows Feature.
  C. From Windows Firewall with Advanced Security on Server2, create an inbound rule.
  D. From Internet Explorer on Server2, download and install Windows Management Framework 3.0.
  E. From the Microsoft management Console on Server1, add a snap-in.
  B. From Windows PowerShell on Server1, run Install-Windows Feature.

  ---

  When the DHCP role is installed, it appears that the firewall rules are automatically added, so C is not valid (not only that, but either way it is an existing rule that one would need only enable nonetheless, not create a new rule). This means

  you only need to add the DHCP Manager MMC snap-in which is a Role Administration Tool feature.

  So the correct answer must be B.

  References:

  Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6 Network Administration, p.228

• Question 168:

  Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.

  Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.

  Server1 is configured as shown in the following table.

  

  VM2 sends and receives large amounts of data over the network.

  You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.

  What should you configure?

  A. NUMA topology
  B. Resource control
  C. resource metering
  D. virtual Machine Chimney
  E. The VLAN ID
  F. Processor Compatibility
  G. The startup order
  H. Automatic Start Action
  I. Integration Services
  J. Port mirroring
  K

  ---

  Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.

  References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx http://technet.microsoft.com/en-us/library/hh831410.aspx Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V, Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335

• Question 169:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server!. Server1 runs a Server Core installation of Windows Server 2012 R2. You install the DNS Server server role on Server1.

  You need to perform the following configurations on Server1: Create an Active Directory-integrated zone named adatum.com. Send unresolved DNS client queries for other domain suffixes to the DNS server of your company's Internet

  Service Provider (ISP).

  Which Windows PowerShell cmdlets should you use?

  To answer, drag the appropriate cmdlet to the correct configuration in the answer area. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.

  Select and Place:

  

  

  ---

  Add-DnsServerDirectoryPartition: Creates a DNS application directory partition. Add-DnsServerPrimaryZone: Adds a primary zone to a DNS server. Set-DNSServer Overwrites a DNS server configuration. SET-DNSServerForwarder Changes forwarder settings on a DNS server Set-DNSServerDSSetting Modifies DNS Active Directory settings. Set-DNSServerSetting Modifies DNS server settings. References: http://technet.microsoft.com/en-us/library/jj649942(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649876(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649845(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649887(v=wps.620).aspx http://technet.microsoft.com/en-us/library/jj649874.aspx http://technet.microsoft.com/en-us/library/jj649909.aspx

• Question 170:

  You have a Hyper-V host named Hyper1 that runs Windows Server 2012 R2.

  Hyper1 hosts several virtual machines that run Windows 8.1.

  Several developers connect to the virtual machines by using the Virtual Machine Connection tool.

  You need to ensure that the devlopers can print to their local printers from within virtual machine sessions.

  What should you configure?

  A. a virtual switch on Hyper1
  B. Remote Desktop Services (RDS) on Hyper1
  C. enhanced session mode on Hyper1
  D. a virtual network adapter on the virtual machines
  C. enhanced session mode on Hyper1

  ---

  To be able to use a computer's local resources on a virtual machine:

  *

  The Hyper-V host must have Enhanced session mode policy and Enhanced session mode settings turned on.

  *

  The computer that you use to connect to the virtual machine with VMConnect must run Windows 8, Windows 8.1, Windows Server 2012, or Windows Server 2012 R2.

  *

  The virtual machine must have Remote Desktop Services enabled and run Windows Server 2012 R2 or Windows 8.1 as the guest operating system.

  Reference: Use local resources on Hyper-V virtual machine with VMConnect https://technet.microsoft.com/en-us/library/dn282274.aspx