Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 181:

  You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 has the virtual switches listed in the following table.

  

  You create a virtual machine named VM1. VM1 has two network adapters. One network adapter connects to vSwitch1. The other network adapter connects to vSwitch2.You configure NIC teaming on VM1.

  You need to ensure that if a physical NIC fails on Server1, VM1 remains connected to the network.

  What should you do on Server1?

  A. Run the Set-VmNetworkAdapterIsolation cmdlet.
  B. Modify the properties of the network adapters on VM1.
  C. Modify the properties of vSwitch1 and vSwitch2.
  D. Run the Set-VmNetworkAdapterAdapterFailoverConfiguration cmdlet.
  B. Modify the properties of the network adapters on VM1.

• Question 182:

  You have a server that runs Windows Server 2012 R2.

  You need to create a volume that will remain online if two disks in the volume fail. The solution must minimize the number of disks used to create the volume.

  Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)

  Select and Place:

  

  

• Question 183:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.

  Contoso.com has a domain controller, named ENSUREPASS-DC01, which has Windows Server 2012 R2 installed. Another Contoso.com domain controller, named ENSUREPASS-DC02, has Windows Server 2008 R2 installed.

  You have deployed a server, named ENSUREPASS-SR15, on Contoso.com's perimeter network. ENSUREPASSSR15 is running a Server Core Installation of Windows Server 2012 R2.

  You have been instructed to make sure that ENSUREPASS-SR15 is part of the Contoso.com domain.

  Which of the following actions should you take?

  A. You should consider making use of Set-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
  B. You should consider making use of Get-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
  C. You should consider making use of Test-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
  D. You should consider making use of Add-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.
  D. You should consider making use of Add-Computer Windows PowerShell cmdlet on ENSUREPASS-SR15.

  ---

  Add-Computer ?Add the local computer to a domain or workgroup.

• Question 184:

  You have a file server named File1 that runs Windows Server 2012 R2.

  File1 contains a shared folder named Share1. Share1 contains an Application named SalesAppl.exe.

  The NTFS permissions for Share1 are shown in the following table.

  

  The members of L_Sales discover that they cannot add files to Share1. Domain users can run SalesAppl.exe successfully.

  You need to ensure that the members of L_Sales can add files to Share1.

  What should you do?

  A. Add the Domain Users group to L_Sales.
  B. Add L_Sales to the Domain Users group.
  C. Edit the Share permissions.
  D. Edit the NTFS permissions.
  C. Edit the Share permissions.

  ---

  Based on the NTFS permissions, these users should be able to add files (as they have the "write" permission), so they must have read-only share permissions preventing them from doing so.

• Question 185:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.

  You create a group Managed Service Account named gservice1.

  You need to configure a service named Service1 to run as the gservice1 account.

  How should you configure Service1?

  A. From the Services console, configure the General settings.
  B. From Windows PowerShell, run Set-Service and specify the -StartupType parameter.
  C. From a command prompt, run sc.exe and specify the config parameter.
  D. From a command prompt, run sc.exe and specify the privs parameter.
  C. From a command prompt, run sc.exe and specify the config parameter.

  ---

  Executing the ss.exe command with the config parameter will modify service configuration.

• Question 186:

  You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. You have fixed-size VHD named Files.vhd.

  You need to make the contents in Files.vhd available to several virtual machines. The solution must meet the following requirements: Ensure that if the contents are changed on any virtual machine, the changes are not reflected on the other virtual machines.

  

  Minimize the amount of disk space used.

  

  What should you do?

  A. Create a fixed-size VHDX. Transfer the information from Files.vhd to the new VHDX file.
  B. Convert Files.vhd to a dynamically expanding VHD?
  C. Create a dynamically expanding VHDX. Transfer the information from Files.vhd to the new VHDX file.
  D. Create differencing VHDs that use Files.vhd as the parent disk.
  D. Create differencing VHDs that use Files.vhd as the parent disk.

  ---

  Child disk for multiple VM's with Files.vhd as parent. A differencing disk is associated with another virtual hard disk that you select when you create the differencing disk. This means that the disk to which you want to associate the differencing

  disk must exist first. This virtual hard disk is called the "parent" disk and the differencing disk is the "child" disk.

  The parent disk can be any type of virtual hard disk.

  The differencing disk stores all changes that would otherwise be made to the parent disk if the differencing disk was not being used. The differencing disk provides an ongoing way to save changes without altering the parent disk. You can use

  the differencing disk to store changes indefinitely, as long as there is enough space on the physical disk where the differencing disk is stored. The differencing disk expands dynamically as data is written to it and can grow as large as the

  maximum size allocated for the parent disk when the parent disk was created.

• Question 187:

  You have a server that runs Windows Server 2012 R2. The server contains the disks configured as shown in the following table.

  

  You need to create a volume that can store up to 3 TB of user files. The solution must ensure that the user files are available if one of the disks in the volume fails. What should you create?

  A. a storage pool on Disk 2 and Disk 3
  B. a spanned volume on Disk 2 and Disk 3
  C. a mirrored volume on Disk 1 and Disk 3
  D. a mirrored volume on Disk 2 and Disk 3
  E. a RAID-5 volume on Disk 1, Disk 2, and Disk 3
  F. a storage pool on Disk 1 and Disk 3
  G. a spanned volume on Disk 0 and Disk 4
  H. a mirrored volume on Disk 1 and Disk 4
  D. a mirrored volume on Disk 2 and Disk 3

• Question 188:

  You have two servers named Server1 and Server2 that run Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 hosts a virtual machine named VM1. VM1 is currently running. VM1 has a snapshot that was created two weeks ago. You plan to use Server2 to perform a forensic analysis of the contents of the disk of VM1 from two weeks ago. You need to ensure that you can view the contents of the disk of VM1 from two weeks ago from Server2. Which three actions should you perform in sequence? (To answer, move the appropriate three actions from the list of actions to the answer area and arrange them in the correct order.)

  Select and Place:

  

  

  ---

  Step 1: Shut down VM1.

  Step 2: Export the snapshot from Server1 by right-clicking on it and selecting export.

  

  Step 3:

  The common container for storing a VM-accessible disk is the VHD file. You can create, change, test, and compact these disks while they aren't in use by a VM. / mount-VHD Mounts a VHD on a host for access

  Hyper-V snapshots can be quite

• Question 189:

  You have a print server named Print1 that runs Windows Server 2012 R2. Print1 has 10 shared printers. You need to change the location of the spool folder. What should you modify?

  A. The properties of the Print Spooler service
  B. The Print Server Properties
  C. The user environment variables
  D. The PrintQueue.inf file
  B. The Print Server Properties

• Question 190:

  Your company has a main office and two branch offices. The offices connect to each other by using a WAN link.

  In the main office, you have a server named Server1 that runs Windows Server 2012 R2.

  Server1 is configured to use an IPv4 address only.

  You need to assign an IPv6 address to Server1. The IP address must be private and routable.

  Which IPv6 address should you assign to Server1?

  A. fe80:ab32:145c::32cc:401b
  B. ff00:3fff:65df:145c:dca8::82a4
  C. 2001:ab32:145c::32cc:401b
  D. fd00:ab32:14:ad88:ac:58:abc2:4
  D. fd00:ab32:14:ad88:ac:58:abc2:4

  ---

  Unique local addresses are IPv6 addresses that are private to an organization in the same way that private addresses璼uch as 10.x.x.x, 192.168.x.x, or 172.16.0.0 172.31.255.255璫an be used on an IPv4 network. Unique local addresses,

  therefore, are not routable on the IPv6 Internet in the same way that an address like 10.20.100.55 is not routable on the IPv4 Internet. A unique local address is always structured as follows:

  The first 8 bits are always 11111101 in binary format. This means that a unique local address always begins with FD and has a prefix identifier of FD00::/8.