Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 151:

  Your network contains an Active Directory domain named contoso.com. The domain contains an application server named Server1. Server1 runs Windows Server 2012 R2. You have a client application named App1 that communicates to Server1 by using dynamic TCP ports.

  On Server1, a technician runs the following command:

  New-NetFirewallRule -DisplayNameAllowDynamic -Direction Outbound -LocalPort 1024-65535 -Protocol TCP. Users report that they can no longer connect to Server1 by using Appl.

  You need to ensure that App1 can connect to Server1.

  What should you run on Server1?

  A. Set-NetFirewallRule -DisplayNameAllowDynamic -Action Allow
  B. netshadvfirewall firewall add rule name=allowdynamic action-allow
  C. netshadvfirewall firewall set rule name-allowdynamic new action- allow
  D. Set-NetFirewallRule -DisplayNameAllowDynamic -Direction Inbound
  D. Set-NetFirewallRule -DisplayNameAllowDynamic -Direction Inbound

  ---

  When using the using the Windows Firewall with Advanced Security console. You can select the Inbound Rules node and scroll down in the list, you can see nine different Network Discovery rules. The Direction Inbound rule is the rule that will allow App1 to connect to Server1.

  Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 6: Create and manage Group Policy, Objective 6.4: Configure Windows Firewall, p. 348 Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 6: Network Administration, Lesson 4: Configuring IPv6/IPv4 Interoperability, p. 269

• Question 152:

  You have a server named Server1 that runs Windows Server 2012 R2.

  You plan to create a storage pool that will contain a new volume.

  You need to create a new 600-GB volume by using thin provisioning. The new volume must use the parity layout.

  What is the minimum number of 256-GB disks required for the storage pool?

  A. 2
  B. 3
  C. 4
  D. 5
  C. 4

  ---

  It takes 3 discs (minimum) in order to create a storage pool array with parity. If this array were using fixed provisioning, this would not be enough given the 256MB capacity (since only 2/3rds of 256 X 3 - less than 600 - could be used as actual data with the rest being parity bits), but since this array uses thin provisioning, a 600GB volume could technically be set up on a 20GB disc and it would still show as 600GB. (So, essentially, the question really becomes how many drives it takes in a storage pool to create a parity array.)

  References: http://technet.microsoft.com/en-us/library/hh831391.aspx http://www.ibeast.com/content/tools/RaidCalc/RaidCalc.asp http://www.raid-calculator.com/default.aspx https://www.icc-usa.com/raid-calculator

• Question 153:

  Your network contains a Hyper-V host named Hyperv1 that runs Windows Server 2012 R2. Hyperv1 has a virtual switch named Switch1.

  You replace all of the network adapters on Hyperv1 with new network adapters that support single-root I/O virtualization (SR-IOV). You need to enable SR-IOV for all of the virtual machines on Hyperv1.

  Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

  A. On each virtual machine, modify the Advanced Features settings of the network adapter.
  B. Modify the settings of the Switch1 virtual switch.
  C. Delete, and then recreate the Switch1 virtual switch.
  D. On each virtual machine, modify the BIOS settings.
  E. On each virtual machine, modify the Hardware Acceleration settings of the network adapter.
  C. Delete, and then recreate the Switch1 virtual switch.
  E. On each virtual machine, modify the Hardware Acceleration settings of the network adapter.

• Question 154:

  Your network contains one Active Directory domain named contoso.com.

  The domain contains 10 domain controllers that run Windows Server 2012 R2. Eight domain controllers are writable domain controllers.

  You need to deploy several read-only domain controllers in contoso.com by using pre-staged computer accounts.

  Which two tasks should you perform? Each correct answer presents part of solution.

  A. Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet.
  B. Create an authentication policy silo.
  C. Create an authentication policy.
  D. Run the Install-ADDSDomainControler cmdlet.
  E. Run the adprep /rodcprep command
  F. Join the servers to contoso.com.
  A. Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet.
  D. Run the Install-ADDSDomainControler cmdlet.

• Question 155:

  Your network contains an Active Directory domain named contoso.com. The domain contains a member server named Hyperv1 and a domain controller named DC1. Hyperv1 has the Hyper-V server role installed. DC1 is a virtual machine on

  Hyperv1. Users report that the time on their client computer is incorrect. You log on to DC1 and verify that the time services are configured correctly. You need to prevent time conflicts between the time provided by DC1 and other potential

  time sources.

  What should you configure? To answer, select the appropriate object in the answer area.

  Hot Area:

  

  

  ---

  Hyper-V integration services are updated with a new service that allows Hyper-V administrators to copy files to the virtual machine while the virtual machine is running without using a network connection.

  In previous versions of Hyper-V, a Hyper-V administrator may have needed to shut down a virtual machine to copy files to it.A new Hyper-V integration service has been added that allows the Hyper-V administrator to copy files to a running

  virtual machine without using a network connection. This will eliminate time conflicts.

  Reference: http://technet.microsoft.com/en-us/library/dn282278.aspx

• Question 156:

  You have a server named Server1 that has a Server Core installation of Windows Server 2008 R2 Service Pack 1.

  Server1 has the DHCP Server server role and the File Server server role installed.

  You need to upgrade Server1 to Windows Server 2012 R2 with the graphical user interface (GUI).

  The solution must meet the following requirements:

  Preserve the server roles and their configurations.

  Minimize administrative effort.

  What should you do?

  A. On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server with a GUI.
  B. Start Server1 from the Windows Server2012 R2 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature.
  C. Start Server1 from the Windows Server 2012 R2 installation media and select Server with a GUI.
  D. On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature
  D. On Server1, run setup.exe from the Windows Server 2012 R2 installation media and select Server Core Installation. When the installation is complete, add the Server Graphical Shell feature

  ---

  D. Upgrade to 2012 R2 and install GUI shell Upgrades that switch from a Server Core installation to the Server with a GUI mode of Windows Server 2012 R2 in one step (and vice versa) are not supported. However, after upgrade is complete, Windows Server 2012 R2 allows you to switch freely between Server Core and Server with a GUI modes.

  Incorrect Answers:

  A: Server is on 2008 R2 core, must install 2012 R2 core and then GUI

  B: Not least effort

  C: Not least effort

  References: http://technet.microsoft.com/en-us/library/jj574204.aspx

• Question 157:

  Your network contains an Active Directory forest named contoso.com.

  The forest contains a child domain named europe.contoso.com. The europe.contoso.com child domain contains a server named Server1 that runs Windows Server 2012 R2.

  You install the DHCP Server server role on Server1.

  You have access to the administrative accounts shown in the following table.

  

  You need to authorize DHCP1.

  Which user account should you use?

  A. Admin1
  B. Admin2
  C. Admin3
  D. Admin4
  D. Admin4

• Question 158:

  You have external virtual switch with srv-io enabled with 10 Virtual Machines on it. You need to make the Virtual Machines able to talk only to each other.

  A. remove the vswitch and recreate it as private.
  B. add new vswitch
  C. remove vswitch and recreate it as public
  D. adjust srv-io settings
  A. remove the vswitch and recreate it as private.

  ---

  You cannot change the settings of a vswitch with SR-IOV enabled, so you must delete it and recreate it.

• Question 159:

  Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 is a member of a workgroup.

  You need to configure a local Group Policy on Server1 that will apply only to non-administrators.

  Which tool should you use?

  A. Group Policy Object Editor
  B. Group Policy Management Console
  C. Group Policy Management Editor
  D. Server Manager
  A. Group Policy Object Editor

  ---

  Once you create a GPO, you can open it in the Group Policy Management Editor and configure the GPO's policies, specifically those settings that target the non-administrators. In this scenario however, you still need to configure the Group

  Policy thus you would need the GPO Editor.

  References:

  Training Guide: Installing and Configuring Windows Server 2012 R2, Chapter 10: Implementing Group Policy, Lesson 1: Planning, implementing and managing group policy, p. 475

• Question 160:

  Your network contains an Active Directory domain named contoso.com. The network contains a DHCP server named DHCP1. You add a new network segment to the network. On the new network segment, you deploy a new server named

  Server1 that runs Windows Server 2012 R2. You need to configure Server1 as a DHCP Relay Agent.

  Which server role should you install on Server1? To answer, select the appropriate role in the answer area.

  Hot Area: