Microsoft 70-410 Online Practice Questions and Exam Preparation

Microsoft 70-410 Online Questions & Answers

• Question 141:

  Your network contains one Active Directory forest named contoso.com. The forest contains a single domain. All domain controllers run Windows Server 2012 R2.

  All client computers run either Windows 7 or Windows 8.1. Some of the Windows 8.1 computers are not joined to the domain.

  Your company's security policy has the following requirements for accessing corporate files:

  All of the offline files on the client computers must be encrypted.

  All users must be locked out of their client computer automatically after two minutes of inactivity.

  A colleague recommends deploying work folders to all of the client computers.

  You need to identify which requirements can be met by using work folders.

  Which requirements should you identify? To answer, select the appropriate options in the answer area.

  Hot Area:

  

  

  ---

  https://4sysops.com/archives/work-folders-for-windows-7-limitations/ http://blogs.technet.com/b/canitpro/archive/2013/11/13/step-by-step-creating-a-work-folders-test-lab-deployment-in-windows-server-2012-r2.aspx

• Question 142:

  Your network contains an Active Directory domain named contoso.com. The domain contains a domain controller named DC1 that runs Windows Server 2012 R2 and a client computer named Computer1 that runs windows 8. DC1 is configured as a DHCP server as shown in the exhibit. (Click the Exhibit button.)

  

  Computer1 is configured to obtain an IP address automatically.

  You notice that Computer1 is unable to obtain an IP address from DC1.

  You need to ensure that Computer1 can receive an IP address from DC1.

  What should you do?

  A. Disable the Allow filters.
  B. Disable the Deny filters.
  C. Authorize DC1.contoso.com.
  D. Activate Scope [10.1.1.0] Contoso.com.
  A. Disable the Allow filters.

  ---

  A red down arrow indicates an unauthorized DHCP server. A DHCP server that is a domain controller or a member of an Active Directory domain queries Active Directory for the list of authorized servers (identified by IP address). If its own IP address is not in the list of authorized DHCP servers, the DHCP Server service does not complete its startup sequence and automatically shuts down.

• Question 143:

  Your network contains an Active Directory domain named corp.contoso.com. The domain contains a domain controller named DC1. When you run ping dcl.corp.contoso.com, you receive the result as shown in the exhibit. (Click the Exhibit button.)

  

  You need to ensure that DC1 can respond to the Ping command. Which rule should you modify? To answer, select the appropriate rule in the answer area.

  Hot Area:

  

  

  ---

  ICMP should have been enabled when ADDS was installed

• Question 144:

  You have a server named Server1 that runs Windows Server 2012 R2. Server1 has five network adapters. Three of the network adapters are connected to a network named LAN1. The two other network adapters are connected to a network

  named LAN2.

  You create a network adapter team named Team1 from the two of the adapters connected to LAN1. You create a network adapter team named Team2 from the two adapters connected to LAN2.

  A company policy states that all server IP addresses must be assigned by using a reserved address in DHCP.

  You need to identify how many DHCP reservations you must create for Server1.

  How many reservations should you identify?

  A. 2
  B. 3
  C. 5
  D. 7
  B. 3

  ---

  1 for each NIC Team (2 total) and 1 for each non-teamed NIC (1 total) -> 3 total IP addresses are required.

• Question 145:

  Your network contains an Active Directory domain named contoso.com. The domain contains an application server named Server1. Server1 runs Windows Server 2012 R2. You have a client application named App1 that communicates to

  Server1 by using dynamic TCP ports.

  On Server1, a technician runs the following command: New-NetFirewallRule -DisplayName AllowDynamic - Direction Outbound -LocalPort 1024- 65535 -Protocol TCP.

  Users report that they can no longer connect to Server1 by using App1.

  You need to ensure that App1 can connect to Server1.

  What should you run on Server1?

  A. Set-NetFirewallRule -DisplayName AllowDynamic -Action Allow
  B. netsh advfirewall firewall set rule name=allowdynamic new action = allow
  C. Set-NetFirewallRule -DisplayName AllowDynamic -Direction Inbound
  D. netsh advfirewall firewall add rule name=allowdynamic action=allow
  C. Set-NetFirewallRule -DisplayName AllowDynamic -Direction Inbound

• Question 146:

  You are configuring a test network. The test network contains a subnet named LAN1. LAN1 uses the network ID of 192.168.15.0/27.

  You plan to add a new subnet named LAN2 to the test network.

  LAN1 and LAN2 will be connected by a router.

  You need to identify a valid network ID for LAN2 that meets the following requirements:

  Ensures that hosts on LAN2 can communicate with hosts on LAN1.

  Supports at least 50 IPv4 hosts.

  Uses only private IP addresses.

  Which network ID should you use?

  To answer, drag the appropriate network ID and subnet mask to the correct location in the answer area.

  Select and Place:

  

  

  ---

  Exam Ref: 70-410: Installing and Configuring Windows Server 2012 R2, Chapter4: Deploying and configuring core network services, Objective 4.1: Configure IPv4 and IPv6 addressing, p.192, 196

• Question 147:

  You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com. All servers on the Contoso.com network have Windows Server 2012 installed.

  Contoso.com has its headquarters in London, and several widespread satellite offices. When Contoso.com releases a new written policy stating that the graphical user interface (GUI) should not be installed on any servers deployed to

  Contoso.com's satellite offices.

  It is reported that a server in one of the satellite offices are not compliant with the new written policy.

  You are required to remedy the situation, while using the least amount of user interaction.

  Which of the following actions should you take?

  A. You should consider uninstalling the User Interfaces and Infrastructure feature using a PowerShell cmdlet.
  B. You should consider uninstalling the User Interfaces and Infrastructure feature via TS Manager.
  C. You should consider uninstalling the User Interfaces and Infrastructure feature via Server Manager.
  D. You should consider uninstalling the User Interfaces and Infrastructure feature using the Dsrm.exe command from the command prompt.
  C. You should consider uninstalling the User Interfaces and Infrastructure feature via Server Manager.

  ---

  Although you could utilize a PowerShell cmdlet, it would require you to either log on to the remote machine to enable PowerShell remoting first (or to use the local PowerShell console). Using Server Manager, you could just add the server (if it wasn't already added) and use the "Remove Roles and Features" applet.

• Question 148:

  You have a new server named Server1 that runs Windows Server 2012 R2.

  Server1 has two dual-core processors and 32 GB of RAM.

  You install the Hyper-V server role on Server1.

  You create two virtual machines on Server1 that each have 8 GB of memory.

  You need to minimize the amount of time it takes for both virtual machines to access memory.

  What should you configure on each virtual machine?

  A. Resource control
  B. Memory weight
  C. Dynamic Memory
  D. NUMA topology
  D. NUMA topology

  ---

  Windows Server 2012 introduced support for projecting a virtual NUMA topology into Hyper-V virtual machines. This capability can help improve the performance of workloads running on virtual machines that are configured with large amounts of memory.

• Question 149:

  You have a server named Server1. Server1 runs Windows Server 2012 R2. Server1 has two network adapters and is located in a perimeter network. You need to install a DHCP Relay Agent on Server1. Which node should you use to add the DHCP Relay Agent? To answer, select the appropriate node in the answer area.

  Hot Area:

  

  

  ---

  Membership in the local Administrators group, or equivalent, is the minimum required to complete this procedure. To configure the IPv4 DHCP relay agent

  1. In the Routing and Remote Access MMC snap-in, expand IPv4, right-click General, and then click New Routing Protocol.

  2. In the New Routing Protocol dialog box, select DHCPv4 Relay Agent, and then click OK.

  3. In the navigation pane, right-click DHCPv4 Relay Agent, and then click New Interface.

  4. Add the network interfaces on which the server might receive DHCPv4 requests that you want to send to the DHCP server. Right-click DHCPv4 Relay Agent, click New Interface, select the appropriate network interface, and then click OK.

  5. In the DHCP Relay Properties dialog box, select Relay DHCP packets, and then click OK.

  6. In the navigation pane, right-click DHCP Relay Agent, and then click Properties.

  7. On the General tab, enter the IPv4 address of the DHCP servers that you want to provide DHCP services for the RRAS server's clients, click Add, and then click OK.

  References:

  Exam Ref 70-410: Installing and Configuring Windows Server 2012 R2, Chapter 4: Deploying and configuring core network services, p. 220

• Question 150:

  You have a server named Server1 that has the Print and Document Services server role installed. You need to provide users with the ability to manage print jobs on Server1 by using a web browser. What should you do?

  A. Start the Printer Extensions and Notifications service and set the service to start automatically.
  B. Install the LPD Service role service.
  C. Start the Computer Browser service and set the service to start automatically.
  D. Install the Internet Printing role service.
  D. Install the Internet Printing role service.

  ---

  References:

  Internet printing makes it possible for computers running Windows Server 2008 to use printers located anywhere in the world by sending print jobs using Hypertext Transfer Protocol (HTTP).

  http://technet.microsoft.com/en-us/library/cc731368(v=ws.10).aspx

  http://technet.microsoft.com/en-us/library/cc731857.aspx