Cisco 352-001 Online Practice Questions and Exam Preparation

Cisco 352-001 Online Questions & Answers

• Question 151:

  You are auditing the network design of a PIM BiDir multicast network. Which option is the most appropriate multicast group source discovery design consideration for this design?

  A. A phantom RP advertises the multicast group sources.
  B. Source discovery is not applicable to PIM BiDir.
  C. Subscribers discover the multicast group sources via DNS.
  D. Subscribers are statically configured with specific sources.
  E. MSDP is used to discover multicast group sources.
  B. Source discovery is not applicable to PIM BiDir.

• Question 152:

  An IS-IS router is connected to four links and redistributing 75 routes from RIP.

  How many LSPs will this router originate?

  A. one LSP: containing the router information, internal routes, and external routes
  B. two LSPs: one containing router information and internal routes and one containing external routes
  C. three LSPs: one containing all links, one containing router information, and one containing external routing information
  D. six LSPs: one for each link, one containing router information, and one containing external routing information
  A. one LSP: containing the router information, internal routes, and external routes

• Question 153:

  Which two steps can be taken by the sinkhole technique? (Choose two.)

  A. Delay an attack from reaching its target
  B. Redirect an attack away from its target C. Monitor attack noise, scans, and other activity
  D. Reverse the direction of an attack
  B. Redirect an attack away from its target C. Monitor attack noise, scans, and other activity

• Question 154:

  Where in this network should you deploy flow monitoring to monitor traffic from all the branch offices?

  A. at the Core devices
  B. at the WAN Distribution devices
  C. at the WAN Edge devices
  D. at each branch office device
  B. at the WAN Distribution devices

• Question 155:

  A service provider has a Resilient Ethernet Protocol ring running as a metro backbone between its locations in one city. A customer wants to connect one site with one box redundant to the Resilient Ethernet Protocol ring at two different service provider locations. How can this be done without producing any Layer 2 loops within the network design?

  A. Spanning tree at the service provider side only must be enabled.
  B. Spanning tree at the customer side only must be enabled.
  C. Flex Links at the service provider side only must be enabled.
  D. Flex Links at the customer side only must be enabled.
  E. EtherChannel at the service provider side and the customer side must be enabled.
  F. Spanning tree at the service provider side and the customer side must be enabled.
  G. Flex Links at the service provider side and the customer side must be enabled.
  D. Flex Links at the customer side only must be enabled.

• Question 156:

  The Service Provider you work for wants to deploy CoS functionality on the P routers of the MPLS core, to provide a complete CoS solution to all customers that purchase services such as dedicated Internet access, MPLS Layer 3 VPN, and

  Layer 2 VPN (pseudowire).

  The design requirements are:

  The network supports four service queues with equal treatment for delay, jitter, and packet loss.

  Queues are numbered 0-3, where 0 is the default queue.

  Three queues have one treatment, whereas the other queue has either one or two treatments.

  The Service Provider manages control traffic, whereas the customers manage business critical and best effort.

  Which two statements could you recommend to allow for the appropriate level of bandwidth allocation? (Choose two.)

  A. Control plane 10%, Real Time 30%, Business Critical 40%, Best Effort 20%
  B. Control plane 80%. Real Time 10%, Business Critical 5%, Best Effort 5%
  C. Control plane 90%, Real Time 5%, Business Critical 5%, Best Effort 0%
  D. Control plane 20%, Real Time 40%, Business Critical 30%, Best Effort 10%
  A. Control plane 10%, Real Time 30%, Business Critical 40%, Best Effort 20%
  D. Control plane 20%, Real Time 40%, Business Critical 30%, Best Effort 10%

• Question 157:

  Your organization is working on a design solution for a new Internet-based remote access virtual private network that has 1000 remote sites. A network administrator recommends GETVPN as the model because the network of today uses DMVPN, which results in a lot of background NHRP control traffic. What is a potential problem with using GETVPN for this design solution?

  A. GETVPN would require a high level of background traffic to maintain its IPsec SAs.
  B. GETVPN is not scalable to a large number of remote sites.
  C. GETVPN and DMVPN will not interoperate.
  D. GETVPN key servers would be on public, hacker-reachable space and need higher security.
  D. GETVPN key servers would be on public, hacker-reachable space and need higher security.

• Question 158:

  Which two statements define some of the general characteristics of SDN? (Choose two.)

  A. Southbound interfaces are interfaces used between the control plane and the date plane.
  B. OpenFlow isconsidered one of the first Northbound APIs used by SDN controllers.
  C. Northbound interfaces are open interfaces used between the control plane and the date plane.
  D. The separation of the control plane from the data plane.
  E. OVSDB is an application database management protocol.
  A. Southbound interfaces are interfaces used between the control plane and the date plane.
  E. OVSDB is an application database management protocol.

• Question 159:

  What are three advantages of using ISATAP? (Choose three.)

  A. It is easier to set up than other tunneling mechanisms, such as 6RD and 6to4.
  B. It is supported on many platforms, such as Linux, Windows, and Cisco IOS Software.
  C. It works with both private and public addressing spaces.
  D. It is a point-to-multipoint tunneling mechanism.
  E. It does not require any changes on the underlying IPv4 network to operate.
  B. It is supported on many platforms, such as Linux, Windows, and Cisco IOS Software.
  C. It works with both private and public addressing spaces.
  E. It does not require any changes on the underlying IPv4 network to operate.

• Question 160:

  Service provider XYZ plans to provide dedicated Internet access and MPLS L3VPN services to business customers. XYZ has these design specifications:

  MP-BGP running on the core MPLS P routers with external Internet routes.

  The core network will include 16 Point of Presence IP POPs throughout the Asia-Pacific region.

  An additional nine non-P routers will use EBGP peering with multiple providers for Internet traffic.

  An additional 50 PE routers will provide end customers with dedicated Internet access and L3VPN services throughout the Asia-Pacific region.

  In what two ways can the MP-BGP be removed from the MPLS P core routers and still provide dedicated Internet access and MPLS L3VPN services? (Choose two.)

  A. Disable BGP from the MPLS core P routers and have the MPLS core P routers run OSPF and LDP.
  B. Enable separate BGP control plane routers using a route reflector server concept that will be fully meshed with peer route reflector servers and have clients as MPLS PE routers and EBGP peering routers.
  C. Enable all EBGP routers as route reflector servers and MPLS PE routers as their clients.
  D. It is not possible to disable BGP from the MPLS core P routers without impacting the dedicated Internet access and MPLS L3VPN services.
  B. Enable separate BGP control plane routers using a route reflector server concept that will be fully meshed with peer route reflector servers and have clients as MPLS PE routers and EBGP peering routers.
  C. Enable all EBGP routers as route reflector servers and MPLS PE routers as their clients.