Cisco 352-001 Online Practice Questions and Exam Preparation

Cisco 352-001 Online Questions & Answers

• Question 141:

  This smart city has decided to deploy a converged network for video surveillance and applications for utility services. These new applications are delay-sensitive and require strict convergence times of less than 50 milliseconds. The network is expected to have up to 50 intermediate distribution frames per ring. Which protocol provides less than 50 milliseconds convergence time?

  A. RSTP
  B. Ethernet Ring Protection
  C. Ethernet Linear Protection
  D. STP
  B. Ethernet Ring Protection

• Question 142:

  DRAG DROP

  Drag and drop the NETCONF layers on the left onto their appropriate description on the left.

  Select and Place:

  

  

• Question 143:

  Which of the following design options meet the requirement to provide IPv6 interdomain multicast?

  A. MSDP
  B. PIM SSM
  C. Auto-RP
  D. PIM dense mode
  B. PIM SSM

• Question 144:

  Voice traffic between two campus enterprise networks is growing. The network designers decide to add a second 10-Mb Metro Ethernet service parallel to their original 10-Mb service in order to provide more bandwidth and diversity. The QoS profile will be the same on the new 10-Mb service due to the voice stability on the first Metro Ethernet link. When the second link is added to the OSPF domain, which traffic design consideration would have the most impact on the voice traffic when both links are active?

  A. per-destination IP address basis
  B. per-flow basis
  C. per-packet basis
  D. per-source IP address basis
  C. per-packet basis

• Question 145:

  Acme Corporation wants to minimize the risk of users plugging unauthorized switches and hubs into the network. Which two features can be used on the LAN access ports to support this design requirement? (Choose two.)

  A. BPDU Guard
  B. PortFast
  C. Loop Guard
  D. Port Security
  E. UDLD
  A. BPDU Guard
  D. Port Security

• Question 146:

  What is the function of the Community String field defined in a trap PDU?

  A. enable the routing of messages
  B. allow authentication by management station
  C. enable reliable delivery of messages
  D. isolate the PDU within a defined region of the network
  B. allow authentication by management station

• Question 147:

  Which mechanism can you use to improve network performance over PPPoE, IPsec, and GRE networks?

  A. Path MTU Discovery
  B. Simple Service Discovery Protocol
  C. ICMP Router Discovery Protocol
  D. Bidirectional Forwarding Detection
  A. Path MTU Discovery

• Question 148:

  Company X will be integrating an IPv6 application into their network and wants to develop a test environment to evaluate application performance across the network. This application will require both unicast and multicast communications. The company can do this implementation only in certain areas of its existing IPv4-only network, but wants all areas to communicate with each other. When developing the design to provide connectivity between these testing locations, what tunneling technology would work in this scenario?

  A. ISATAP
  B. 6to4
  C. DMVPN
  D. 6vPE
  E. 6PE
  C. DMVPN

• Question 149:

  Which two Layer 2 features should be applied to the network location identified by a circle? (Choose two)

  A. UDLC
  B. PortFast
  C. PortFast trunk
  D. BPDU filter
  E. loop guard
  F. BPDU guard
  B. PortFast
  F. BPDU guard

• Question 150:

  Refer to the exhibit.

  

  A customer interconnected hundreds of branch offices into a single DMVPN network, with the HUB in the main data center. Due to security policies, the customer requires that the default route for all Internet traffic from the users at the

  branches must go through the tunnel and the only connections that are allowed to and from the branch router over the local internet circuit are the DMVPN tunnels.

  Which two combined actions must you take on the branch router to address these security requirements and keep the solution scalable? (Choose two)

  A. Place the WAN interface in a front-door VRF, leaving the tunnel interface in the default routing instance
  B. Protect the WAN interface by an inbound ACL that permits only IPsec-related traffic
  C. Implement a zone-based firewall that allows only IPsec-related traffic from zone UNTRUSTED to zone TRUSTED
  D. Add a host route for the public IP address of each remote branch and HUB routers that points directly to the local ISP, and add a default route that points to the tunnel
  E. Use a floating default route with the preferred path over the tunnel and a backup path over the Internet natively
  A. Place the WAN interface in a front-door VRF, leaving the tunnel interface in the default routing instance
  B. Protect the WAN interface by an inbound ACL that permits only IPsec-related traffic