Cisco 350-601 Online Practice Questions and Exam Preparation

Cisco 350-601 Online Questions & Answers

• Question 21:

  An engineer mus! configure the remote SSH management connectivity for Cisco Nexus 9000 Series Switches to meet these requirements

  The connectivity must be permitted from a jump host with an IP address of 10 10.10 10/24 All switches must be permitted to connect via SSH to other devices from the subnet of 10 .

  20.20.0/24 Which configuration set accomplishes these requirements?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  B. Option B

• Question 22:

  Refer to the exhibit.

  

  An engineer implements an FCoE Unified Fabric where vPC exists between N9K-A and N9K-B. To avoid rate discards, bandwidth must be regulated to account for sent traffic that exceeds the access speed.

  Which set of commands completes the configuration?

  A. fcoe cost 255 on N9K-A random-detect min 10 max 20 spanning-tree port type edge on Po10
  B. fcoe cost 0 on N9K-A shape min 0 gbps max 1 gbps spanning-tree port type edge on Po1
  C. fcoe fcf-priority 0 on N9K-A hardware qos fc rate-shaper low spanning-tree port type edge trunk on Po10
  D. fcoe fcf-priority 255 on N9K-A police 50000 spanning-tree port type edge trunk on Po1
  C. fcoe fcf-priority 0 on N9K-A hardware qos fc rate-shaper low spanning-tree port type edge trunk on Po10

  ---

  
  

• Question 23:

  Refer to the exhibit.

  

  The communication between the web server and the application server experiences poor performance.

  The network engineer must collect the traffic between the two servers, including the payload for more investigation.

  The collected data must be sent from the remote site to the headquarters.

  Which action accomplishes this goal?

  A. Configure NetFlow on N5K-1 to send the data to the monitor server.
  B. Configure SNMP on N5K-1 to send the data to the monitor server.
  C. Configure a SPAN session between N5K-1 and N5K-2.
  D. Configure an ERSPAN session between N5K-1 and N5K-2.
  D. Configure an ERSPAN session between N5K-1 and N5K-2.

• Question 24:

  Refer to the exhibit.

  

  A network engineer must retrieve the network interface name from a JSON object. The engineer loads the JSON into a Python dictionary named json_object.

  Which code snippet completes the Python script?

  A. interface_name = json_object["if-name"]
  B. interface_name = json_object[0]
  C. interface_name = json_object["eth0"]
  D. interface_name = json_object[0][2]
  A. interface_name = json_object["if-name"]

• Question 25:

  A Cisco UCS user called "Employee1" accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies.

  Which action must be taken to meet these requirements?

  A. Modify the privilege level assigned to the user
  B. Define a custom user role and assign it to users
  C. Assign the user "Employee1" the network-operator role
  D. Assign users to a specific Cisco UCS locale
  D. Assign users to a specific Cisco UCS locale

  ---

  Explanation

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3-1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_UCSM_Admin_Mgmt_Guide_chapter_01.html

• Question 26:

  Refer to the exhibit.

  

  A Cisco data center environment is implemented with vPC. The web server replies using the SVI MAC address as the Layer 2 header instead of the HSRP MAC address on VLAN 23. This behavior causes packet drops on the Cisco Nexus 9000 Series Switches due to the vPC loop prevention mechanism. The requirement is for the vPC feature to allow N9K_1 and N9K_2 to forward traffic between the NAS server and the web server, even if the HSRP's MAC address is not used on Layer 2 headers for VLAN

  23. Which feature must be used to accomplish this goal?

  A. ARP Sync
  B. Object Tracking
  C. L3 Peer Router
  D. Peer Gateway
  D. Peer Gateway

• Question 27:

  DRAG DROP

  Drag and drop the telemetry concepts from the left onto their functions on the right.

  Select and Place:

  

  

• Question 28:

  Refer to the exhibit.

  

  Three operational endpoints are deployed under the same application EPG. Only the ICMP traffic must be permitted within the Web_EPG.

  Which two actions must be taken to accomplish this goal? (Choose two.)

  A. Check box of forward control proxy ARP.
  B. Set VRF policy control preference to unenforced.
  C. Add Taboo contract on the Web_EPG.
  D. Configure intra EPG contract under Web_EPG.
  E. Mark intra EPG isolation as enforced.
  C. Add Taboo contract on the Web_EPG.
  E. Mark intra EPG isolation as enforced.

• Question 29:

  Refer to the exhibit.

  

  A network engineer must configure an authentication solution for Cisco UCS with these conditions:

  1. Two-factor authentication must be enabled for all UCS user authentication.

  2. All AAA packets must be encrypted and use TCP port 49 to establish communication.

  Which set of actions needs these requirements?

  A. Create the LDAP provider. Change the LDAP group rule in an LDAP provider.
  B. Create the RADIUS group mapping. Change the RADIUS group rule in a RADIUS provider.
  C. Remove the LDAP provider. Create a TACACS+ provider in user management.
  D. Delete the LDAP group mapping. Create a RADIUS provider in user management.
  C. Remove the LDAP provider. Create a TACACS+ provider in user management.

• Question 30:

  What is the format of this output?

  

  A. SOAP
  B. YAML
  C. XML
  D. JSON
  D. JSON